This is a note to let you know that I've just added the patch titled mmc: cqhci: clear HALT state after CQE enable to the 5.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: mmc-cqhci-clear-halt-state-after-cqe-enable.patch and it can be found in the queue-5.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From 92b18252b91de567cd875f2e84722b10ab34ee28 Mon Sep 17 00:00:00 2001 From: Wenbin Mei <wenbin.mei@xxxxxxxxxxxx> Date: Tue, 26 Oct 2021 15:08:12 +0800 Subject: mmc: cqhci: clear HALT state after CQE enable From: Wenbin Mei <wenbin.mei@xxxxxxxxxxxx> commit 92b18252b91de567cd875f2e84722b10ab34ee28 upstream. While mmc0 enter suspend state, we need halt CQE to send legacy cmd(flush cache) and disable cqe, for resume back, we enable CQE and not clear HALT state. In this case MediaTek mmc host controller will keep the value for HALT state after CQE disable/enable flow, so the next CQE transfer after resume will be timeout due to CQE is in HALT state, the log as below: <4>.(4)[318:kworker/4:1H]mmc0: cqhci: timeout for tag 2 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: ============ CQHCI REGISTER DUMP =========== <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Caps: 0x100020b6 | Version: 0x00000510 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Config: 0x00001103 | Control: 0x00000001 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: TDL base: 0xfd05f000 | TDL up32: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Doorbell: 0x8000203c | TCN: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Task clr: 0x00000000 | SSC1: 0x00001000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Resp idx: 0x00000000 | Resp arg: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: CRNQP: 0x00000000 | CRNQDUN: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: CRNQIS: 0x00000000 | CRNQIE: 0x00000000 This change check HALT state after CQE enable, if CQE is in HALT state, we will clear it. Signed-off-by: Wenbin Mei <wenbin.mei@xxxxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx> Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host") Link: https://lore.kernel.org/r/20211026070812.9359-1-wenbin.mei@xxxxxxxxxxxx Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/mmc/host/cqhci-core.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/mmc/host/cqhci-core.c +++ b/drivers/mmc/host/cqhci-core.c @@ -282,6 +282,9 @@ static void __cqhci_enable(struct cqhci_ cqhci_writel(cq_host, cqcfg, CQHCI_CFG); + if (cqhci_readl(cq_host, CQHCI_CTL) & CQHCI_HALT) + cqhci_writel(cq_host, 0, CQHCI_CTL); + mmc->cqe_on = true; if (cq_host->ops->enable) Patches currently in stable-queue which might be from wenbin.mei@xxxxxxxxxxxx are queue-5.14/mmc-mediatek-move-cqhci-init-behind-ungate-clock.patch queue-5.14/mmc-cqhci-clear-halt-state-after-cqe-enable.patch