This is a note to let you know that I've just added the patch titled drm/kmb: Enable alpha blended second plane to the 5.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: drm-kmb-enable-alpha-blended-second-plane.patch and it can be found in the queue-5.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 8d9c4a0ac852d5877e731c70f7a04bff6c4e992b Author: Edmund Dea <edmund.j.dea@xxxxxxxxx> Date: Fri Dec 4 14:34:29 2020 -0800 drm/kmb: Enable alpha blended second plane [ Upstream commit c026565fe9be813fe826f7e5533ed763283af5f0 ] Enable one additional plane that is alpha blended on top of the primary plane. This also fixes the below warnings when building with -Warray-bounds: drivers/gpu/drm/kmb/kmb_plane.c:135:20: warning: array subscript 3 is above array bounds of 'struct layer_status[1]' [-Warray-bounds] drivers/gpu/drm/kmb/kmb_plane.c:132:20: warning: array subscript 2 is above array bounds of 'struct layer_status[1]' [-Warray-bounds] drivers/gpu/drm/kmb/kmb_plane.c:129:20: warning: array subscript 1 is above array bounds of 'struct layer_status[1]' [-Warray-bounds] v2: corrected previous patch dependecies so it builds Signed-off-by: Edmund Dea <edmund.j.dea@xxxxxxxxx> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@xxxxxxxxx> Acked-by: Sam Ravnborg <sam@xxxxxxxxxxxx> Link: https://patchwork.kernel.org/project/dri-devel/patch/20210728003126.1425028-13-anitha.chrisanthus@xxxxxxxxx/ Signed-off-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/drivers/gpu/drm/kmb/kmb_drv.c b/drivers/gpu/drm/kmb/kmb_drv.c index bb7eca9e13ae..d3091bf38cc0 100644 --- a/drivers/gpu/drm/kmb/kmb_drv.c +++ b/drivers/gpu/drm/kmb/kmb_drv.c @@ -173,10 +173,10 @@ static int kmb_setup_mode_config(struct drm_device *drm) ret = drmm_mode_config_init(drm); if (ret) return ret; - drm->mode_config.min_width = KMB_MIN_WIDTH; - drm->mode_config.min_height = KMB_MIN_HEIGHT; - drm->mode_config.max_width = KMB_MAX_WIDTH; - drm->mode_config.max_height = KMB_MAX_HEIGHT; + drm->mode_config.min_width = KMB_FB_MIN_WIDTH; + drm->mode_config.min_height = KMB_FB_MIN_HEIGHT; + drm->mode_config.max_width = KMB_FB_MAX_WIDTH; + drm->mode_config.max_height = KMB_FB_MAX_HEIGHT; drm->mode_config.funcs = &kmb_mode_config_funcs; ret = kmb_setup_crtc(drm); diff --git a/drivers/gpu/drm/kmb/kmb_drv.h b/drivers/gpu/drm/kmb/kmb_drv.h index 178aa14f2efc..5869890b8fc7 100644 --- a/drivers/gpu/drm/kmb/kmb_drv.h +++ b/drivers/gpu/drm/kmb/kmb_drv.h @@ -20,6 +20,11 @@ #define DRIVER_MAJOR 1 #define DRIVER_MINOR 1 +#define KMB_FB_MAX_WIDTH 1920 +#define KMB_FB_MAX_HEIGHT 1080 +#define KMB_FB_MIN_WIDTH 1 +#define KMB_FB_MIN_HEIGHT 1 + #define KMB_LCD_DEFAULT_CLK 200000000 #define KMB_SYS_CLK_MHZ 500 diff --git a/drivers/gpu/drm/kmb/kmb_plane.c b/drivers/gpu/drm/kmb/kmb_plane.c index 45cb096455b5..00404ba4126d 100644 --- a/drivers/gpu/drm/kmb/kmb_plane.c +++ b/drivers/gpu/drm/kmb/kmb_plane.c @@ -113,9 +113,10 @@ static int kmb_plane_atomic_check(struct drm_plane *plane, if (ret) return ret; - if (new_plane_state->crtc_w > KMB_MAX_WIDTH || new_plane_state->crtc_h > KMB_MAX_HEIGHT) - return -EINVAL; - if (new_plane_state->crtc_w < KMB_MIN_WIDTH || new_plane_state->crtc_h < KMB_MIN_HEIGHT) + if (new_plane_state->crtc_w > KMB_FB_MAX_WIDTH || + new_plane_state->crtc_h > KMB_FB_MAX_HEIGHT || + new_plane_state->crtc_w < KMB_FB_MIN_WIDTH || + new_plane_state->crtc_h < KMB_FB_MIN_HEIGHT) return -EINVAL; /* Due to HW limitations, changing plane height or width after @@ -306,6 +307,44 @@ static void config_csc(struct kmb_drm_private *kmb, int plane_id) kmb_write_lcd(kmb, LCD_LAYERn_CSC_OFF3(plane_id), csc_coef_lcd[11]); } +static void kmb_plane_set_alpha(struct kmb_drm_private *kmb, + const struct drm_plane_state *state, + unsigned char plane_id, + unsigned int *val) +{ + u16 plane_alpha = state->alpha; + u16 pixel_blend_mode = state->pixel_blend_mode; + int has_alpha = state->fb->format->has_alpha; + + if (plane_alpha != DRM_BLEND_ALPHA_OPAQUE) + *val |= LCD_LAYER_ALPHA_STATIC; + + if (has_alpha) { + switch (pixel_blend_mode) { + case DRM_MODE_BLEND_PIXEL_NONE: + break; + case DRM_MODE_BLEND_PREMULTI: + *val |= LCD_LAYER_ALPHA_EMBED | LCD_LAYER_ALPHA_PREMULT; + break; + case DRM_MODE_BLEND_COVERAGE: + *val |= LCD_LAYER_ALPHA_EMBED; + break; + default: + DRM_DEBUG("Missing pixel blend mode case (%s == %ld)\n", + __stringify(pixel_blend_mode), + (long)pixel_blend_mode); + break; + } + } + + if (plane_alpha == DRM_BLEND_ALPHA_OPAQUE && !has_alpha) { + *val &= LCD_LAYER_ALPHA_DISABLED; + return; + } + + kmb_write_lcd(kmb, LCD_LAYERn_ALPHA(plane_id), plane_alpha); +} + static void kmb_plane_atomic_update(struct drm_plane *plane, struct drm_atomic_state *state) { @@ -333,11 +372,12 @@ static void kmb_plane_atomic_update(struct drm_plane *plane, fb = new_plane_state->fb; if (!fb) return; + num_planes = fb->format->num_planes; kmb_plane = to_kmb_plane(plane); - plane_id = kmb_plane->id; kmb = to_kmb(plane->dev); + plane_id = kmb_plane->id; spin_lock_irq(&kmb->irq_lock); if (kmb->kmb_under_flow || kmb->kmb_flush_done) { @@ -431,20 +471,32 @@ static void kmb_plane_atomic_update(struct drm_plane *plane, config_csc(kmb, plane_id); } + kmb_plane_set_alpha(kmb, plane->state, plane_id, &val); + kmb_write_lcd(kmb, LCD_LAYERn_CFG(plane_id), val); + /* Configure LCD_CONTROL */ + ctrl = kmb_read_lcd(kmb, LCD_CONTROL); + + /* Set layer blending config */ + ctrl &= ~LCD_CTRL_ALPHA_ALL; + ctrl |= LCD_CTRL_ALPHA_BOTTOM_VL1 | + LCD_CTRL_ALPHA_BLEND_VL2; + + ctrl &= ~LCD_CTRL_ALPHA_BLEND_BKGND_DISABLE; + switch (plane_id) { case LAYER_0: - ctrl = LCD_CTRL_VL1_ENABLE; + ctrl |= LCD_CTRL_VL1_ENABLE; break; case LAYER_1: - ctrl = LCD_CTRL_VL2_ENABLE; + ctrl |= LCD_CTRL_VL2_ENABLE; break; case LAYER_2: - ctrl = LCD_CTRL_GL1_ENABLE; + ctrl |= LCD_CTRL_GL1_ENABLE; break; case LAYER_3: - ctrl = LCD_CTRL_GL2_ENABLE; + ctrl |= LCD_CTRL_GL2_ENABLE; break; } @@ -456,7 +508,7 @@ static void kmb_plane_atomic_update(struct drm_plane *plane, */ ctrl |= LCD_CTRL_VHSYNC_IDLE_LVL; - kmb_set_bitmask_lcd(kmb, LCD_CONTROL, ctrl); + kmb_write_lcd(kmb, LCD_CONTROL, ctrl); /* Enable pipeline AXI read transactions for the DMA * after setting graphics layers. This must be done @@ -531,6 +583,9 @@ struct kmb_plane *kmb_plane_init(struct drm_device *drm) enum drm_plane_type plane_type; const u32 *plane_formats; int num_plane_formats; + unsigned int blend_caps = BIT(DRM_MODE_BLEND_PIXEL_NONE) | + BIT(DRM_MODE_BLEND_PREMULTI) | + BIT(DRM_MODE_BLEND_COVERAGE); for (i = 0; i < KMB_MAX_PLANES; i++) { plane = drmm_kzalloc(drm, sizeof(*plane), GFP_KERNEL); @@ -562,8 +617,16 @@ struct kmb_plane *kmb_plane_init(struct drm_device *drm) drm_dbg(drm, "%s : %d i=%d type=%d", __func__, __LINE__, i, plane_type); + drm_plane_create_alpha_property(&plane->base_plane); + + drm_plane_create_blend_mode_property(&plane->base_plane, + blend_caps); + + drm_plane_create_zpos_immutable_property(&plane->base_plane, i); + drm_plane_helper_add(&plane->base_plane, &kmb_plane_helper_funcs); + if (plane_type == DRM_PLANE_TYPE_PRIMARY) { primary = plane; kmb->plane = plane; diff --git a/drivers/gpu/drm/kmb/kmb_plane.h b/drivers/gpu/drm/kmb/kmb_plane.h index 99207b35365c..b51144044fe8 100644 --- a/drivers/gpu/drm/kmb/kmb_plane.h +++ b/drivers/gpu/drm/kmb/kmb_plane.h @@ -35,6 +35,9 @@ #define POSSIBLE_CRTCS 1 #define to_kmb_plane(x) container_of(x, struct kmb_plane, base_plane) +#define POSSIBLE_CRTCS 1 +#define KMB_MAX_PLANES 2 + enum layer_id { LAYER_0, LAYER_1, @@ -43,8 +46,6 @@ enum layer_id { /* KMB_MAX_PLANES */ }; -#define KMB_MAX_PLANES 1 - enum sub_plane_id { Y_PLANE, U_PLANE, diff --git a/drivers/gpu/drm/kmb/kmb_regs.h b/drivers/gpu/drm/kmb/kmb_regs.h index 48150569f702..9756101b0d32 100644 --- a/drivers/gpu/drm/kmb/kmb_regs.h +++ b/drivers/gpu/drm/kmb/kmb_regs.h @@ -43,8 +43,10 @@ #define LCD_CTRL_OUTPUT_ENABLED BIT(19) #define LCD_CTRL_BPORCH_ENABLE BIT(21) #define LCD_CTRL_FPORCH_ENABLE BIT(22) +#define LCD_CTRL_ALPHA_BLEND_BKGND_DISABLE BIT(23) #define LCD_CTRL_PIPELINE_DMA BIT(28) #define LCD_CTRL_VHSYNC_IDLE_LVL BIT(31) +#define LCD_CTRL_ALPHA_ALL (0xff << 6) /* interrupts */ #define LCD_INT_STATUS (0x4 * 0x001) @@ -115,6 +117,7 @@ #define LCD_LAYER_ALPHA_EMBED BIT(5) #define LCD_LAYER_ALPHA_COMBI (LCD_LAYER_ALPHA_STATIC | \ LCD_LAYER_ALPHA_EMBED) +#define LCD_LAYER_ALPHA_DISABLED ~(LCD_LAYER_ALPHA_COMBI) /* RGB multiplied with alpha */ #define LCD_LAYER_ALPHA_PREMULT BIT(6) #define LCD_LAYER_INVERT_COL BIT(7)