This is a note to let you know that I've just added the patch titled
riscv: explicitly use symbol offsets for VDSO
to the 5.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
riscv-explicitly-use-symbol-offsets-for-vdso.patch
and it can be found in the queue-5.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 3348445183d4025768a5a5f243071406f11c1444
Author: Saleem Abdulrasool <abdulras@xxxxxxxxxx>
Date: Wed Aug 4 17:32:14 2021 +0000
riscv: explicitly use symbol offsets for VDSO
[ Upstream commit fde9c59aebafb91caeed816cc510b56f14aa63ae ]
The current implementation of the `__rt_sigaction` reference computed an
absolute offset relative to the mapped base of the VDSO. While this can
be handled in the medlow model, the medany model cannot handle this as
it is meant to be position independent. The current implementation
relied on the BFD linker relaxing the PC-relative relocation into an
absolute relocation as it was a near-zero address allowing it to be
referenced relative to `zero`.
We now extract the offsets and create a generated header allowing the
build with LLVM and lld to succeed as we no longer depend on the linker
rewriting address references near zero. This change was largely
modelled after the ARM64 target which does something similar.
Signed-off-by: Saleem Abdulrasool <abdulras@xxxxxxxxxx>
Tested-by: Nathan Chancellor <nathan@xxxxxxxxxx>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index bc74afdbf31e..e026b2d0a5a4 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -108,6 +108,10 @@ PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
+prepare: vdso_prepare
+vdso_prepare: prepare0
+ $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso include/generated/vdso-offsets.h
+
ifneq ($(CONFIG_XIP_KERNEL),y)
ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
KBUILD_IMAGE := $(boot)/loader.bin
diff --git a/arch/riscv/include/asm/vdso.h b/arch/riscv/include/asm/vdso.h
index 1453a2f563bc..d8d003c2b5a3 100644
--- a/arch/riscv/include/asm/vdso.h
+++ b/arch/riscv/include/asm/vdso.h
@@ -9,25 +9,15 @@
#define _ASM_RISCV_VDSO_H
#include <linux/types.h>
+#include <generated/vdso-offsets.h>
#ifndef CONFIG_GENERIC_TIME_VSYSCALL
struct vdso_data {
};
#endif
-/*
- * The VDSO symbols are mapped into Linux so we can just use regular symbol
- * addressing to get their offsets in userspace. The symbols are mapped at an
- * offset of 0, but since the linker must support setting weak undefined
- * symbols to the absolute address 0 it also happens to support other low
- * addresses even when the code model suggests those low addresses would not
- * otherwise be availiable.
- */
#define VDSO_SYMBOL(base, name) \
-({ \
- extern const char __vdso_##name[]; \
- (void __user *)((unsigned long)(base) + __vdso_##name); \
-})
+ (void __user *)((unsigned long)(base) + __vdso_##name##_offset)
asmlinkage long sys_riscv_flush_icache(uintptr_t, uintptr_t, uintptr_t);
diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile
index 24d936c147cd..f8cb9144a284 100644
--- a/arch/riscv/kernel/vdso/Makefile
+++ b/arch/riscv/kernel/vdso/Makefile
@@ -23,10 +23,10 @@ ifneq ($(c-gettimeofday-y),)
endif
# Build rules
-targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.lds vdso-syms.S
+targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.lds
obj-vdso := $(addprefix $(obj)/, $(obj-vdso))
-obj-y += vdso.o vdso-syms.o
+obj-y += vdso.o
CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
# Disable -pg to prevent insert call site
@@ -43,20 +43,22 @@ $(obj)/vdso.o: $(obj)/vdso.so
# link rule for the .so file, .lds has to be first
$(obj)/vdso.so.dbg: $(obj)/vdso.lds $(obj-vdso) FORCE
$(call if_changed,vdsold)
-LDFLAGS_vdso.so.dbg = -shared -s -soname=linux-vdso.so.1 \
+LDFLAGS_vdso.so.dbg = -shared -S -soname=linux-vdso.so.1 \
--build-id=sha1 --hash-style=both --eh-frame-hdr
-# We also create a special relocatable object that should mirror the symbol
-# table and layout of the linked DSO. With ld --just-symbols we can then
-# refer to these symbols in the kernel code rather than hand-coded addresses.
-$(obj)/vdso-syms.S: $(obj)/vdso.so FORCE
- $(call if_changed,so2s)
-
# strip rule for the .so file
$(obj)/%.so: OBJCOPYFLAGS := -S
$(obj)/%.so: $(obj)/%.so.dbg FORCE
$(call if_changed,objcopy)
+# Generate VDSO offsets using helper script
+gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh
+quiet_cmd_vdsosym = VDSOSYM $@
+ cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
+
+include/generated/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE
+ $(call if_changed,vdsosym)
+
# actual build commands
# The DSO images are built using a special linker script
# Make sure only to export the intended __vdso_xxx symbol offsets.
@@ -65,11 +67,6 @@ quiet_cmd_vdsold = VDSOLD $@
$(OBJCOPY) $(patsubst %, -G __vdso_%, $(vdso-syms)) $@.tmp $@ && \
rm $@.tmp
-# Extracts symbol offsets from the VDSO, converting them into an assembly file
-# that contains the same symbols at the same offsets.
-quiet_cmd_so2s = SO2S $@
- cmd_so2s = $(NM) -D $< | $(srctree)/$(src)/so2s.sh > $@
-
# install commands for the unstripped file
quiet_cmd_vdso_install = INSTALL $@
cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@
diff --git a/arch/riscv/kernel/vdso/gen_vdso_offsets.sh b/arch/riscv/kernel/vdso/gen_vdso_offsets.sh
new file mode 100755
index 000000000000..c2e5613f3495
--- /dev/null
+++ b/arch/riscv/kernel/vdso/gen_vdso_offsets.sh
@@ -0,0 +1,5 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+LC_ALL=C
+sed -n -e 's/^[0]\+\(0[0-9a-fA-F]*\) . \(__vdso_[a-zA-Z0-9_]*\)$/\#define \2_offset\t0x\1/p'
diff --git a/arch/riscv/kernel/vdso/so2s.sh b/arch/riscv/kernel/vdso/so2s.sh
deleted file mode 100755
index e64cb6d9440e..000000000000
--- a/arch/riscv/kernel/vdso/so2s.sh
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0+
-# Copyright 2020 Palmer Dabbelt <palmerdabbelt@xxxxxxxxxx>
-
-sed 's!\([0-9a-f]*\) T \([a-z0-9_]*\)\(@@LINUX_4.15\)*!.global \2\n.set \2,0x\1!' \
-| grep '^\.'
