This is a note to let you know that I've just added the patch titled
arm64: dts: ls1028a: add missing CAN nodes
to the 5.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm64-dts-ls1028a-add-missing-can-nodes.patch
and it can be found in the queue-5.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit c7baf66faa7235448f8305f8f482f3dd85688ffc
Author: Michael Walle <michael@xxxxxxxx>
Date: Thu Oct 1 11:11:30 2020 +0200
arm64: dts: ls1028a: add missing CAN nodes
[ Upstream commit 04fa4f03e3533f51b4db19cb487435f5862a0514 ]
The LS1028A has two FlexCAN controller. These are compatible with
the ones from the LX2160A. Add the nodes.
The first controller was tested on the Kontron sl28 board.
Signed-off-by: Michael Walle <michael@xxxxxxxx>
Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 963091069ab3..02ae6bfff565 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -287,6 +287,24 @@
status = "disabled";
};
+ can0: can@2180000 {
+ compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
+ reg = <0x0 0x2180000 0x0 0x10000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sysclk>, <&clockgen 4 1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ can1: can@2190000 {
+ compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
+ reg = <0x0 0x2190000 0x0 0x10000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sysclk>, <&clockgen 4 1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
duart0: serial@21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
