This is a note to let you know that I've just added the patch titled hwmon: (tmp421) report /PVLD condition as fault to the 5.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: hwmon-tmp421-report-pvld-condition-as-fault.patch and it can be found in the queue-5.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 75fc9814eeb72310eb14138174a9371aaa8c91be Author: Paul Fertser <fercerpav@xxxxxxxxx> Date: Fri Sep 24 12:30:10 2021 +0300 hwmon: (tmp421) report /PVLD condition as fault [ Upstream commit 540effa7f283d25bcc13c0940d808002fee340b8 ] For both local and remote sensors all the supported ICs can report an "undervoltage lockout" condition which means the conversion wasn't properly performed due to insufficient power supply voltage and so the measurement results can't be trusted. Fixes: 9410700b881f ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips") Signed-off-by: Paul Fertser <fercerpav@xxxxxxxxx> Link: https://lore.kernel.org/r/20210924093011.26083-2-fercerpav@xxxxxxxxx Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c index 8fd8c3a94dfe..c9ef83627bb7 100644 --- a/drivers/hwmon/tmp421.c +++ b/drivers/hwmon/tmp421.c @@ -179,10 +179,10 @@ static int tmp421_read(struct device *dev, enum hwmon_sensor_types type, return 0; case hwmon_temp_fault: /* - * The OPEN bit signals a fault. This is bit 0 of the temperature - * register (low byte). + * Any of OPEN or /PVLD bits indicate a hardware mulfunction + * and the conversion result may be incorrect */ - *val = tmp421->temp[channel] & 0x01; + *val = !!(tmp421->temp[channel] & 0x03); return 0; default: return -EOPNOTSUPP; @@ -195,9 +195,6 @@ static umode_t tmp421_is_visible(const void *data, enum hwmon_sensor_types type, { switch (attr) { case hwmon_temp_fault: - if (channel == 0) - return 0; - return 0444; case hwmon_temp_input: return 0444; default: