This is a note to let you know that I've just added the patch titled mmc: rtsx_pci: Fix long reads when clock is prescaled to the 4.19-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: mmc-rtsx_pci-fix-long-reads-when-clock-is-prescaled.patch and it can be found in the queue-4.19 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit cf028910ce1955f9013073a461023b72483af4e0 Author: Thomas Hebb <tommyhebb@xxxxxxxxx> Date: Sun Aug 1 04:46:14 2021 -0700 mmc: rtsx_pci: Fix long reads when clock is prescaled [ Upstream commit 3ac5e45291f3f0d699a721357380d4593bc2dcb3 ] For unexplained reasons, the prescaler register for this device needs to be cleared (set to 1) while performing a data read or else the command will hang. This does not appear to affect the real clock rate sent out on the bus, so I assume it's purely to work around a hardware bug. During normal operation, the prescaler is already set to 1, so nothing needs to be done. However, in "initial mode" (which is used for sub-MHz clock speeds, like the core sets while enumerating cards), it's set to 128 and so we need to reset it during data reads. We currently fail to do this for long reads. This has no functional affect on the driver's operation currently written, as the MMC core always sets a clock above 1MHz before attempting any long reads. However, the core could conceivably set any clock speed at any time and the driver should still work, so I think this fix is worthwhile. I personally encountered this issue while performing data recovery on an external chip. My connections had poor signal integrity, so I modified the core code to reduce the clock speed. Without this change, I saw the card enumerate but was unable to actually read any data. Writes don't seem to work in the situation described above even with this change (and even if the workaround is extended to encompass data write commands). I was not able to find a way to get them working. Signed-off-by: Thomas Hebb <tommyhebb@xxxxxxxxx> Link: https://lore.kernel.org/r/2fef280d8409ab0100c26c6ac7050227defd098d.1627818365.git.tommyhebb@xxxxxxxxx Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c index 02de6a5701d6..c1de8fa50fe8 100644 --- a/drivers/mmc/host/rtsx_pci_sdmmc.c +++ b/drivers/mmc/host/rtsx_pci_sdmmc.c @@ -551,9 +551,22 @@ static int sd_write_long_data(struct realtek_pci_sdmmc *host, return 0; } +static inline void sd_enable_initial_mode(struct realtek_pci_sdmmc *host) +{ + rtsx_pci_write_register(host->pcr, SD_CFG1, + SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_128); +} + +static inline void sd_disable_initial_mode(struct realtek_pci_sdmmc *host) +{ + rtsx_pci_write_register(host->pcr, SD_CFG1, + SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_0); +} + static int sd_rw_multi(struct realtek_pci_sdmmc *host, struct mmc_request *mrq) { struct mmc_data *data = mrq->data; + int err; if (host->sg_count < 0) { data->error = host->sg_count; @@ -562,22 +575,19 @@ static int sd_rw_multi(struct realtek_pci_sdmmc *host, struct mmc_request *mrq) return data->error; } - if (data->flags & MMC_DATA_READ) - return sd_read_long_data(host, mrq); + if (data->flags & MMC_DATA_READ) { + if (host->initial_mode) + sd_disable_initial_mode(host); - return sd_write_long_data(host, mrq); -} + err = sd_read_long_data(host, mrq); -static inline void sd_enable_initial_mode(struct realtek_pci_sdmmc *host) -{ - rtsx_pci_write_register(host->pcr, SD_CFG1, - SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_128); -} + if (host->initial_mode) + sd_enable_initial_mode(host); -static inline void sd_disable_initial_mode(struct realtek_pci_sdmmc *host) -{ - rtsx_pci_write_register(host->pcr, SD_CFG1, - SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_0); + return err; + } + + return sd_write_long_data(host, mrq); } static void sd_normal_rw(struct realtek_pci_sdmmc *host,