This is a note to let you know that I've just added the patch titled ARM: dts: am437x: align gpio hog names with dt-schema to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm-dts-am437x-align-gpio-hog-names-with-dt-schema.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 57277059f3eb25b07d5f7a2a4f067690cb5ea371 Author: Grygorii Strashko <grygorii.strashko@xxxxxx> Date: Tue May 25 20:58:55 2021 +0300 ARM: dts: am437x: align gpio hog names with dt-schema [ Upstream commit bd551acdde3ad40da1a97391abd6e0db7852bf66 ] The GPIO Hog dt-schema node naming convention expect GPIO hogs node names to end with a 'hog' suffix. Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 3293484028ad..b5863cc13cfd 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -660,7 +660,7 @@ pinctrl-0 = <&gpio0_pins>; status = "okay"; - p23 { + sel-emmc-nand-hog { gpio-hog; gpios = <23 GPIO_ACTIVE_HIGH>; /* SelEMMCorNAND selects between eMMC and NAND: @@ -693,7 +693,7 @@ status = "okay"; ti,no-reset-on-init; - p8 { + sel-lcd-hdmi-hog { /* * SelLCDorHDMI selects between display and audio paths: * Low: HDMI display with audio via HDMI diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index a74b09f17a1a..b61feb994526 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -536,7 +536,7 @@ pinctrl-0 = <&display_mux_pins>; status = "okay"; - p1 { + sel-lcd-hdmi-hog { /* * SelLCDorHDMI selects between display and audio paths: * Low: HDMI display with audio via HDMI