This is a note to let you know that I've just added the patch titled ARM: dts: imx6: phyFLEX: Fix UART hardware flow control to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm-dts-imx6-phyflex-fix-uart-hardware-flow-control.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 77781af98c152ff85532701c97f11219f1b2ccd2 Author: Primoz Fiser <primoz.fiser@xxxxxxxxx> Date: Mon Apr 12 08:24:50 2021 +0200 ARM: dts: imx6: phyFLEX: Fix UART hardware flow control [ Upstream commit 14cdc1f243d79e0b46be150502b7dba9c5a6bdfd ] Serial interface uart3 on phyFLEX board is capable of 5-wire connection including signals RTS and CTS for hardware flow control. Fix signals UART3_CTS_B and UART3_RTS_B padmux assignments and add missing property "uart-has-rtscts" to allow serial interface to be configured and used with the hardware flow control. Signed-off-by: Primoz Fiser <primoz.fiser@xxxxxxxxx> Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index fed72a5f3ffa..4dede1fbfadb 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -307,8 +307,8 @@ fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x1b0b1 - MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1 >; }; @@ -395,6 +395,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; status = "disabled"; };