This is a note to let you know that I've just added the patch titled
ARM: dts: am437x: align gpio hog names with dt-schema
to the 4.19-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-dts-am437x-align-gpio-hog-names-with-dt-schema.patch
and it can be found in the queue-4.19 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit d946e38f783fdfe73c02b81bbb1a471ff74fdfbc
Author: Grygorii Strashko <grygorii.strashko@xxxxxx>
Date: Tue May 25 20:58:55 2021 +0300
ARM: dts: am437x: align gpio hog names with dt-schema
[ Upstream commit bd551acdde3ad40da1a97391abd6e0db7852bf66 ]
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.
Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 8a17eca2bc97..7511b10182af 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -698,7 +698,7 @@
pinctrl-0 = <&gpio0_pins>;
status = "okay";
- p23 {
+ sel-emmc-nand-hog {
gpio-hog;
gpios = <23 GPIO_ACTIVE_HIGH>;
/* SelEMMCorNAND selects between eMMC and NAND:
@@ -731,7 +731,7 @@
status = "okay";
ti,no-reset-on-init;
- p8 {
+ sel-lcd-hdmi-hog {
/*
* SelLCDorHDMI selects between display and audio paths:
* Low: HDMI display with audio via HDMI
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 02bbdfb3f258..07143ee48fed 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -708,7 +708,7 @@
pinctrl-0 = <&display_mux_pins>;
status = "okay";
- p1 {
+ sel-lcd-hdmi-hog {
/*
* SelLCDorHDMI selects between display and audio paths:
* Low: HDMI display with audio via HDMI
