This is a note to let you know that I've just added the patch titled firmware: arm_scmi: Reset Rx buffer to max size during async commands to the 5.10-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: firmware-arm_scmi-reset-rx-buffer-to-max-size-during.patch and it can be found in the queue-5.10 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit ac70eb379a30e35641b81d826f0eecba3b3e637f Author: Cristian Marussi <cristian.marussi@xxxxxxx> Date: Tue Jun 1 11:24:17 2021 +0100 firmware: arm_scmi: Reset Rx buffer to max size during async commands [ Upstream commit 0cb7af474e0dbb2f500c67aa62b6db9fafa74de2 ] During an async commands execution the Rx buffer length is at first set to max_msg_sz when the synchronous part of the command is first sent. However once the synchronous part completes the transport layer waits for the delayed response which will be processed using the same xfer descriptor initially allocated. Since synchronous response received at the end of the xfer will shrink the Rx buffer length to the effective payload response length, it needs to be reset again. Raise the Rx buffer length again to max_msg_sz before fetching the delayed response to ensure full response is read correctly from the shared memory. Link: https://lore.kernel.org/r/20210601102421.26581-2-cristian.marussi@xxxxxxx Fixes: 58ecdf03dbb9 ("firmware: arm_scmi: Add support for asynchronous commands and delayed response") Signed-off-by: Cristian Marussi <cristian.marussi@xxxxxxx> [sudeep.holla: moved reset to scmi_handle_response as it could race with do_xfer_with_response] Signed-off-by: Sudeep Holla <sudeep.holla@xxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c index 6b2ce3f28f7b..f9901fadb3a4 100644 --- a/drivers/firmware/arm_scmi/driver.c +++ b/drivers/firmware/arm_scmi/driver.c @@ -268,6 +268,10 @@ static void scmi_handle_response(struct scmi_chan_info *cinfo, return; } + /* rx.len could be shrunk in the sync do_xfer, so reset to maxsz */ + if (msg_type == MSG_TYPE_DELAYED_RESP) + xfer->rx.len = info->desc->max_msg_size; + scmi_dump_header_dbg(dev, &xfer->hdr); info->desc->ops->fetch_response(cinfo, xfer);