This is a note to let you know that I've just added the patch titled
ARM: dts: stm32: Connect PHY IRQ line on DH STM32MP1 SoM
to the 5.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-dts-stm32-connect-phy-irq-line-on-dh-stm32mp1-so.patch
and it can be found in the queue-5.10 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 922f9b15a2e872b6ac905f25cabe695369024b7c
Author: Marek Vasut <marex@xxxxxxx>
Date: Thu Oct 8 21:36:18 2020 +0200
ARM: dts: stm32: Connect PHY IRQ line on DH STM32MP1 SoM
[ Upstream commit 516728273ddfbf51b3d0fcaac05d26e299a7b456 ]
On the production DHCOM STM32MP15xx SoM, the PHY IRQ line is connected
to the PI11 pin. Describe it in the DT as well, so the PHY IRQ can be
used e.g. to detect cable insertion and removal.
Signed-off-by: Marek Vasut <marex@xxxxxxx>
Cc: Alexandre Torgue <alexandre.torgue@xxxxxx>
Cc: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
Cc: Patrice Chotard <patrice.chotard@xxxxxx>
Cc: Patrick Delaunay <patrick.delaunay@xxxxxx>
Cc: linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
To: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Signed-off-by: Alexandre Torgue <alexandre.torgue@xxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index 2d027dafb7bc..71f3e4efce65 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -127,6 +127,8 @@
phy0: ethernet-phy@1 {
reg = <1>;
+ interrupt-parent = <&gpioi>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
};
};
};
