This is a note to let you know that I've just added the patch titled media: dtv5100: fix control-request directions to the 5.13-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: media-dtv5100-fix-control-request-directions.patch and it can be found in the queue-5.13 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From 8c8b9a9be2afa8bd6a72ad1130532baab9fab89d Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan@xxxxxxxxxx> Date: Fri, 21 May 2021 15:28:38 +0200 Subject: media: dtv5100: fix control-request directions From: Johan Hovold <johan@xxxxxxxxxx> commit 8c8b9a9be2afa8bd6a72ad1130532baab9fab89d upstream. The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Fix the control requests which erroneously used usb_rcvctrlpipe(). Fixes: 8466028be792 ("V4L/DVB (8734): Initial support for AME DTV-5100 USB2.0 DVB-T") Cc: stable@xxxxxxxxxxxxxxx # 2.6.28 Signed-off-by: Johan Hovold <johan@xxxxxxxxxx> Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/media/usb/dvb-usb/dtv5100.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) --- a/drivers/media/usb/dvb-usb/dtv5100.c +++ b/drivers/media/usb/dvb-usb/dtv5100.c @@ -26,6 +26,7 @@ static int dtv5100_i2c_msg(struct dvb_us u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) { struct dtv5100_state *st = d->priv; + unsigned int pipe; u8 request; u8 type; u16 value; @@ -34,6 +35,7 @@ static int dtv5100_i2c_msg(struct dvb_us switch (wlen) { case 1: /* write { reg }, read { value } */ + pipe = usb_rcvctrlpipe(d->udev, 0); request = (addr == DTV5100_DEMOD_ADDR ? DTV5100_DEMOD_READ : DTV5100_TUNER_READ); type = USB_TYPE_VENDOR | USB_DIR_IN; @@ -41,6 +43,7 @@ static int dtv5100_i2c_msg(struct dvb_us break; case 2: /* write { reg, value } */ + pipe = usb_sndctrlpipe(d->udev, 0); request = (addr == DTV5100_DEMOD_ADDR ? DTV5100_DEMOD_WRITE : DTV5100_TUNER_WRITE); type = USB_TYPE_VENDOR | USB_DIR_OUT; @@ -54,7 +57,7 @@ static int dtv5100_i2c_msg(struct dvb_us memcpy(st->data, rbuf, rlen); msleep(1); /* avoid I2C errors */ - return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), request, + return usb_control_msg(d->udev, pipe, request, type, value, index, st->data, rlen, DTV5100_USB_TIMEOUT); } @@ -141,7 +144,7 @@ static int dtv5100_probe(struct usb_inte /* initialize non qt1010/zl10353 part? */ for (i = 0; dtv5100_init[i].request; i++) { - ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), dtv5100_init[i].request, USB_TYPE_VENDOR | USB_DIR_OUT, dtv5100_init[i].value, Patches currently in stable-queue which might be from johan@xxxxxxxxxx are queue-5.13/media-gspca-sq905-fix-control-request-direction.patch queue-5.13/media-gspca-sunplus-fix-zero-length-control-requests.patch queue-5.13/media-rtl28xxu-fix-zero-length-control-request.patch queue-5.13/media-dtv5100-fix-control-request-directions.patch