This is a note to let you know that I've just added the patch titled
regulator: rtmv20: Fix .set_current_limit/.get_current_limit callbacks
to the 5.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
regulator-rtmv20-fix-.set_current_limit-.get_current_limit-callbacks.patch
and it can be found in the queue-5.10 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 86ab21cc39e6b99b7065ab9008c90bec5dec535a Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@xxxxxxxxxx>
Date: Sun, 30 May 2021 20:41:00 +0800
Subject: regulator: rtmv20: Fix .set_current_limit/.get_current_limit callbacks
From: Axel Lin <axel.lin@xxxxxxxxxx>
commit 86ab21cc39e6b99b7065ab9008c90bec5dec535a upstream.
Current code does not set .curr_table and .n_linear_ranges settings,
so it cannot use the regulator_get/set_current_limit_regmap helpers.
If we setup the curr_table, it will has 200 entries.
Implement customized .set_current_limit/.get_current_limit callbacks
instead.
Fixes: b8c054a5eaf0 ("regulator: rtmv20: Adds support for Richtek RTMV20 load switch regulator")
Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
Reviewed-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20210530124101.477727-1-axel.lin@xxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/regulator/rtmv20-regulator.c | 42 +++++++++++++++++++++++++++++++++--
1 file changed, 40 insertions(+), 2 deletions(-)
--- a/drivers/regulator/rtmv20-regulator.c
+++ b/drivers/regulator/rtmv20-regulator.c
@@ -103,9 +103,47 @@ static int rtmv20_lsw_disable(struct reg
return 0;
}
+static int rtmv20_lsw_set_current_limit(struct regulator_dev *rdev, int min_uA,
+ int max_uA)
+{
+ int sel;
+
+ if (min_uA > RTMV20_LSW_MAXUA || max_uA < RTMV20_LSW_MINUA)
+ return -EINVAL;
+
+ if (max_uA > RTMV20_LSW_MAXUA)
+ max_uA = RTMV20_LSW_MAXUA;
+
+ sel = (max_uA - RTMV20_LSW_MINUA) / RTMV20_LSW_STEPUA;
+
+ /* Ensure the selected setting is still in range */
+ if ((sel * RTMV20_LSW_STEPUA + RTMV20_LSW_MINUA) < min_uA)
+ return -EINVAL;
+
+ sel <<= ffs(rdev->desc->csel_mask) - 1;
+
+ return regmap_update_bits(rdev->regmap, rdev->desc->csel_reg,
+ rdev->desc->csel_mask, sel);
+}
+
+static int rtmv20_lsw_get_current_limit(struct regulator_dev *rdev)
+{
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(rdev->regmap, rdev->desc->csel_reg, &val);
+ if (ret)
+ return ret;
+
+ val &= rdev->desc->csel_mask;
+ val >>= ffs(rdev->desc->csel_mask) - 1;
+
+ return val * RTMV20_LSW_STEPUA + RTMV20_LSW_MINUA;
+}
+
static const struct regulator_ops rtmv20_regulator_ops = {
- .set_current_limit = regulator_set_current_limit_regmap,
- .get_current_limit = regulator_get_current_limit_regmap,
+ .set_current_limit = rtmv20_lsw_set_current_limit,
+ .get_current_limit = rtmv20_lsw_get_current_limit,
.enable = rtmv20_lsw_enable,
.disable = rtmv20_lsw_disable,
.is_enabled = regulator_is_enabled_regmap,
Patches currently in stable-queue which might be from axel.lin@xxxxxxxxxx are
queue-5.10/regulator-bd71828-fix-.n_voltages-settings.patch
queue-5.10/regulator-rtmv20-fix-.set_current_limit-.get_current_limit-callbacks.patch
queue-5.10/regulator-fan53880-fix-missing-n_voltages-setting.patch
