This is a note to let you know that I've just added the patch titled ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs to the 4.19-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm-dts-imx6qdl-sabresd-assign-corresponding-power-supply-for-ldos.patch and it can be found in the queue-4.19 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From 93385546ba369182220436f60ceb3beabe4b7de1 Mon Sep 17 00:00:00 2001 From: Anson Huang <anson.huang@xxxxxxx> Date: Sun, 12 May 2019 09:57:20 +0000 Subject: ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs From: Anson Huang <anson.huang@xxxxxxx> commit 93385546ba369182220436f60ceb3beabe4b7de1 upstream. On i.MX6Q/DL SabreSD board, vgen5 supplies vdd1p1/vdd2p5 LDO and sw2 supplies vdd3p0 LDO, this patch assigns corresponding power supply for vdd1p1/vdd2p5/vdd3p0 to avoid confusion by below log: vdd1p1: supplied by regulator-dummy vdd3p0: supplied by regulator-dummy vdd2p5: supplied by regulator-dummy With this patch, the power supply is more accurate: vdd1p1: supplied by VGEN5 vdd3p0: supplied by SW2 vdd2p5: supplied by VGEN5 Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx> Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 12 ++++++++++++ arch/arm/boot/dts/imx6qdl.dtsi | 6 +++--- 2 files changed, 15 insertions(+), 3 deletions(-) --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -671,6 +671,18 @@ vin-supply = <&sw1c_reg>; }; +®_vdd1p1 { + vin-supply = <&vgen5_reg>; +}; + +®_vdd3p0 { + vin-supply = <&sw2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&vgen5_reg>; +}; + &snvs_poweroff { status = "okay"; }; --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -686,7 +686,7 @@ <0 54 IRQ_TYPE_LEVEL_HIGH>, <0 127 IRQ_TYPE_LEVEL_HIGH>; - regulator-1p1 { + reg_vdd1p1: regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <1000000>; @@ -701,7 +701,7 @@ anatop-enable-bit = <0>; }; - regulator-3p0 { + reg_vdd3p0: regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -716,7 +716,7 @@ anatop-enable-bit = <0>; }; - regulator-2p5 { + reg_vdd2p5: regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2250000>; Patches currently in stable-queue which might be from anson.huang@xxxxxxx are queue-4.19/arm-dts-imx6qdl-sabresd-assign-corresponding-power-supply-for-ldos.patch