This is a note to let you know that I've just added the patch titled arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage to the 5.12-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm64-dts-freescale-sl28-var1-fix-rgmii-clock-and-vo.patch and it can be found in the queue-5.12 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 4037350884db23e785ec3b3b7a93d0fd4ebd641b Author: Michael Walle <michael@xxxxxxxx> Date: Fri May 14 20:55:53 2021 +0200 arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage [ Upstream commit 52387bb9a4a75b88887383cb91d3995ae6f4044a ] During hardware validation it was noticed that the clock isn't continuously enabled when there is no link. This is because the 125MHz clock is derived from the internal PLL which seems to go into some kind of power-down mode every once in a while. The LS1028A expects a contiuous clock. Thus enable the PLL all the time. Also, the RGMII pad voltage is wrong, it was configured to 2.5V (that is the VDDH regulator). The correct voltage is 1.8V, i.e. the VDDIO regulator. This fix is for the freescale/fsl-ls1028a-kontron-sl28-var1.dts. Fixes: 642856097c18 ("arm64: dts: freescale: sl28: add variant 1") Signed-off-by: Michael Walle <michael@xxxxxxxx> Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts index 6c309b97587d..e8d31279b7a3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts @@ -46,7 +46,8 @@ eee-broken-100tx; qca,clk-out-frequency = <125000000>; qca,clk-out-strength = <AR803X_STRENGTH_FULL>; - vddio-supply = <&vddh>; + qca,keep-pll-enabled; + vddio-supply = <&vddio>; vddio: vddio-regulator { regulator-name = "VDDIO";