This is a note to let you know that I've just added the patch titled arm64: dts: ls1028a: fix memory node to the 5.12-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm64-dts-ls1028a-fix-memory-node.patch and it can be found in the queue-5.12 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 978852c9d257c83f122116d04b1af4140df5fc83 Author: Michael Walle <michael@xxxxxxxx> Date: Thu Apr 8 13:02:18 2021 +0200 arm64: dts: ls1028a: fix memory node [ Upstream commit dabea675faf16e8682aa478ff3ce65dd775620bc ] While enabling EDAC support for the LS1028A it was discovered that the memory node has a wrong endianness setting as well as a wrong interrupt assignment. Fix both. This was tested on a sl28 board. To force ECC errors, you can use the error injection supported by the controller in hardware (with CONFIG_EDAC_DEBUG enabled): # enable error injection $ echo 0x100 > /sys/devices/system/edac/mc/mc0/inject_ctrl # flip lowest bit of the data $ echo 0x1 > /sys/devices/system/edac/mc/mc0/inject_data_lo Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC") Signed-off-by: Michael Walle <michael@xxxxxxxx> Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 262fbad8f0ec..1b264e5e947a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -201,8 +201,8 @@ ddr: memory-controller@1080000 { compatible = "fsl,qoriq-memory-controller"; reg = <0x0 0x1080000 0x0 0x1000>; - interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; - big-endian; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + little-endian; }; dcfg: syscon@1e00000 {