This is a note to let you know that I've just added the patch titled ARM: 9012/1: move device tree mapping out of linear region to the 5.10-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm-9012-1-move-device-tree-mapping-out-of-linear-region.patch and it can be found in the queue-5.10 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From foo@baz Mon May 17 01:35:13 PM CEST 2021 From: Florian Fainelli <f.fainelli@xxxxxxxxx> Date: Mon, 10 May 2021 06:21:09 -0700 Subject: ARM: 9012/1: move device tree mapping out of linear region To: stable@xxxxxxxxxxxxxxx Cc: Ard Biesheuvel <ardb@xxxxxxxxxx>, Linus Walleij <linus.walleij@xxxxxxxxxx>, Nicolas Pitre <nico@xxxxxxxxxxx>, Russell King <rmk+kernel@xxxxxxxxxxxxxxx>, Florian Fainelli <f.fainelli@xxxxxxxxx>, Jonathan Corbet <corbet@xxxxxxx>, Russell King <linux@xxxxxxxxxxxxxxx>, Mike Rapoport <rppt@xxxxxxxxxx>, Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>, Nick Desaulniers <ndesaulniers@xxxxxxxxxx>, Joe Perches <joe@xxxxxxxxxxx>, Max Filippov <jcmvbkbc@xxxxxxxxx>, Tian Tao <tiantao6@xxxxxxxxxxxxx>, linux-doc@xxxxxxxxxxxxxxx (open list:DOCUMENTATION), linux-kernel@xxxxxxxxxxxxxxx (open list), linux-arm-kernel@xxxxxxxxxxxxxxxxxxx (moderated list:ARM PORT), Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>, Sasha Levin <sashal@xxxxxxxxxx> Message-ID: <20210510132111.1690943-3-f.fainelli@xxxxxxxxx> From: Ard Biesheuvel <ardb@xxxxxxxxxx> commit 7a1be318f5795cb66fa0dc86b3ace427fe68057f upstream On ARM, setting up the linear region is tricky, given the constraints around placement and alignment of the memblocks, and how the kernel itself as well as the DT are placed in physical memory. Let's simplify matters a bit, by moving the device tree mapping to the top of the address space, right between the end of the vmalloc region and the start of the the fixmap region, and create a read-only mapping for it that is independent of the size of the linear region, and how it is organized. Since this region was formerly used as a guard region, which will now be populated fully on LPAE builds by this read-only mapping (which will still be able to function as a guard region for stray writes), bump the start of the [underutilized] fixmap region by 512 KB as well, to ensure that there is always a proper guard region here. Doing so still leaves ample room for the fixmap space, even with NR_CPUS set to its maximum value of 32. Tested-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Reviewed-by: Nicolas Pitre <nico@xxxxxxxxxxx> Signed-off-by: Ard Biesheuvel <ardb@xxxxxxxxxx> Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- Documentation/arm/memory.rst | 7 ++++++- arch/arm/include/asm/fixmap.h | 2 +- arch/arm/include/asm/memory.h | 5 +++++ arch/arm/kernel/head.S | 5 ++--- arch/arm/kernel/setup.c | 11 ++++++++--- arch/arm/mm/init.c | 1 - arch/arm/mm/mmu.c | 20 ++++++++++++++------ arch/arm/mm/pv-fixup-asm.S | 4 ++-- 8 files changed, 38 insertions(+), 17 deletions(-) --- a/Documentation/arm/memory.rst +++ b/Documentation/arm/memory.rst @@ -45,9 +45,14 @@ fffe8000 fffeffff DTCM mapping area for fffe0000 fffe7fff ITCM mapping area for platforms with ITCM mounted inside the CPU. -ffc00000 ffefffff Fixmap mapping region. Addresses provided +ffc80000 ffefffff Fixmap mapping region. Addresses provided by fix_to_virt() will be located here. +ffc00000 ffc7ffff Guard region + +ff800000 ffbfffff Permanent, fixed read-only mapping of the + firmware provided DT blob + fee00000 feffffff Mapping of PCI I/O space. This is a static mapping within the vmalloc space. --- a/arch/arm/include/asm/fixmap.h +++ b/arch/arm/include/asm/fixmap.h @@ -2,7 +2,7 @@ #ifndef _ASM_FIXMAP_H #define _ASM_FIXMAP_H -#define FIXADDR_START 0xffc00000UL +#define FIXADDR_START 0xffc80000UL #define FIXADDR_END 0xfff00000UL #define FIXADDR_TOP (FIXADDR_END - PAGE_SIZE) --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -67,6 +67,10 @@ */ #define XIP_VIRT_ADDR(physaddr) (MODULES_VADDR + ((physaddr) & 0x000fffff)) +#define FDT_FIXED_BASE UL(0xff800000) +#define FDT_FIXED_SIZE (2 * PMD_SIZE) +#define FDT_VIRT_ADDR(physaddr) ((void *)(FDT_FIXED_BASE | (physaddr) % PMD_SIZE)) + #if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE) /* * Allow 16MB-aligned ioremap pages @@ -107,6 +111,7 @@ extern unsigned long vectors_base; #define MODULES_VADDR PAGE_OFFSET #define XIP_VIRT_ADDR(physaddr) (physaddr) +#define FDT_VIRT_ADDR(physaddr) ((void *)(physaddr)) #endif /* !CONFIG_MMU */ --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -275,9 +275,8 @@ __create_page_tables: */ mov r0, r2, lsr #SECTION_SHIFT movs r0, r0, lsl #SECTION_SHIFT - subne r3, r0, r8 - addne r3, r3, #PAGE_OFFSET - addne r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER) + ldrne r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ORDER) + addne r3, r3, r4 orrne r6, r7, r0 strne r6, [r3], #1 << PMD_ORDER addne r6, r6, #1 << SECTION_SHIFT --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -18,6 +18,7 @@ #include <linux/of_platform.h> #include <linux/init.h> #include <linux/kexec.h> +#include <linux/libfdt.h> #include <linux/of_fdt.h> #include <linux/cpu.h> #include <linux/interrupt.h> @@ -89,7 +90,6 @@ unsigned int cacheid __read_mostly; EXPORT_SYMBOL(cacheid); unsigned int __atags_pointer __initdata; -void *atags_vaddr __initdata; unsigned int system_rev; EXPORT_SYMBOL(system_rev); @@ -1083,13 +1083,18 @@ void __init hyp_mode_check(void) void __init setup_arch(char **cmdline_p) { const struct machine_desc *mdesc = NULL; + void *atags_vaddr = NULL; if (__atags_pointer) - atags_vaddr = phys_to_virt(__atags_pointer); + atags_vaddr = FDT_VIRT_ADDR(__atags_pointer); setup_processor(); - if (atags_vaddr) + if (atags_vaddr) { mdesc = setup_machine_fdt(atags_vaddr); + if (mdesc) + memblock_reserve(__atags_pointer, + fdt_totalsize(atags_vaddr)); + } if (!mdesc) mdesc = setup_machine_tags(atags_vaddr, __machine_arch_type); if (!mdesc) { --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -223,7 +223,6 @@ void __init arm_memblock_init(const stru if (mdesc->reserve) mdesc->reserve(); - early_init_fdt_reserve_self(); early_init_fdt_scan_reserved_mem(); /* reserve memory for DMA contiguous allocations */ --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -39,6 +39,8 @@ #include "mm.h" #include "tcm.h" +extern unsigned long __atags_pointer; + /* * empty_zero_page is a special page that is used for * zero-initialized data and COW. @@ -946,7 +948,7 @@ static void __init create_mapping(struct return; } - if ((md->type == MT_DEVICE || md->type == MT_ROM) && + if (md->type == MT_DEVICE && md->virtual >= PAGE_OFFSET && md->virtual < FIXADDR_START && (md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) { pr_warn("BUG: mapping for 0x%08llx at 0x%08lx out of vmalloc space\n", @@ -1333,6 +1335,15 @@ static void __init devicemaps_init(const for (addr = VMALLOC_START; addr < (FIXADDR_TOP & PMD_MASK); addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); + if (__atags_pointer) { + /* create a read-only mapping of the device tree */ + map.pfn = __phys_to_pfn(__atags_pointer & SECTION_MASK); + map.virtual = FDT_FIXED_BASE; + map.length = FDT_FIXED_SIZE; + map.type = MT_ROM; + create_mapping(&map); + } + /* * Map the kernel if it is XIP. * It is always first in the modulearea. @@ -1489,8 +1500,7 @@ static void __init map_lowmem(void) } #ifdef CONFIG_ARM_PV_FIXUP -extern void *atags_vaddr; -typedef void pgtables_remap(long long offset, unsigned long pgd, void *bdata); +typedef void pgtables_remap(long long offset, unsigned long pgd); pgtables_remap lpae_pgtables_remap_asm; /* @@ -1503,7 +1513,6 @@ static void __init early_paging_init(con unsigned long pa_pgd; unsigned int cr, ttbcr; long long offset; - void *boot_data; if (!mdesc->pv_fixup) return; @@ -1520,7 +1529,6 @@ static void __init early_paging_init(con */ lpae_pgtables_remap = (pgtables_remap *)(unsigned long)__pa(lpae_pgtables_remap_asm); pa_pgd = __pa(swapper_pg_dir); - boot_data = atags_vaddr; barrier(); pr_info("Switching physical address space to 0x%08llx\n", @@ -1556,7 +1564,7 @@ static void __init early_paging_init(con * needs to be assembly. It's fairly simple, as we're using the * temporary tables setup by the initial assembly code. */ - lpae_pgtables_remap(offset, pa_pgd, boot_data); + lpae_pgtables_remap(offset, pa_pgd); /* Re-enable the caches and cacheable TLB walks */ asm volatile("mcr p15, 0, %0, c2, c0, 2" : : "r" (ttbcr)); --- a/arch/arm/mm/pv-fixup-asm.S +++ b/arch/arm/mm/pv-fixup-asm.S @@ -39,8 +39,8 @@ ENTRY(lpae_pgtables_remap_asm) /* Update level 2 entries for the boot data */ add r7, r2, #0x1000 - add r7, r7, r3, lsr #SECTION_SHIFT - L2_ORDER - bic r7, r7, #(1 << L2_ORDER) - 1 + movw r3, #FDT_FIXED_BASE >> (SECTION_SHIFT - L2_ORDER) + add r7, r7, r3 ldrd r4, r5, [r7] adds r4, r4, r0 adc r5, r5, r1 Patches currently in stable-queue which might be from f.fainelli@xxxxxxxxx are queue-5.10/arm-9020-1-mm-use-correct-section-size-macro-to-describe-the-fdt-virtual-address.patch queue-5.10/arm-9011-1-centralize-phys-to-virt-conversion-of-dt-atags-address.patch queue-5.10/arm-9027-1-head.s-explicitly-map-dt-even-if-it-lives-in-the-first-physical-section.patch queue-5.10/arm-9012-1-move-device-tree-mapping-out-of-linear-region.patch