This is a note to let you know that I've just added the patch titled Input: nspire-keypad - enable interrupts only when opened to the 5.11-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: input-nspire-keypad-enable-interrupts-only-when-open.patch and it can be found in the queue-5.11 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 8546f002f51a8858cb78e196743bfbcf325d9ef8 Author: Fabian Vogt <fabian@xxxxxxxxxxxxxx> Date: Tue Mar 23 10:45:55 2021 -0700 Input: nspire-keypad - enable interrupts only when opened [ Upstream commit 69d5ff3e9e51e23d5d81bf48480aa5671be67a71 ] The driver registers an interrupt handler in _probe, but didn't configure them until later when the _open function is called. In between, the keypad can fire an IRQ due to touchpad activity, which the handler ignores. This causes the kernel to disable the interrupt, blocking the keypad from working. Fix this by disabling interrupts before registering the handler. Additionally, disable them in _close, so that they're only enabled while open. Fixes: fc4f31461892 ("Input: add TI-Nspire keypad support") Signed-off-by: Fabian Vogt <fabian@xxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/3383725.iizBOSrK1V@xxxxxxxxxxxxxxxxxx Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/drivers/input/keyboard/nspire-keypad.c b/drivers/input/keyboard/nspire-keypad.c index 63d5e488137d..e9fa1423f136 100644 --- a/drivers/input/keyboard/nspire-keypad.c +++ b/drivers/input/keyboard/nspire-keypad.c @@ -93,9 +93,15 @@ static irqreturn_t nspire_keypad_irq(int irq, void *dev_id) return IRQ_HANDLED; } -static int nspire_keypad_chip_init(struct nspire_keypad *keypad) +static int nspire_keypad_open(struct input_dev *input) { + struct nspire_keypad *keypad = input_get_drvdata(input); unsigned long val = 0, cycles_per_us, delay_cycles, row_delay_cycles; + int error; + + error = clk_prepare_enable(keypad->clk); + if (error) + return error; cycles_per_us = (clk_get_rate(keypad->clk) / 1000000); if (cycles_per_us == 0) @@ -121,30 +127,6 @@ static int nspire_keypad_chip_init(struct nspire_keypad *keypad) keypad->int_mask = 1 << 1; writel(keypad->int_mask, keypad->reg_base + KEYPAD_INTMSK); - /* Disable GPIO interrupts to prevent hanging on touchpad */ - /* Possibly used to detect touchpad events */ - writel(0, keypad->reg_base + KEYPAD_UNKNOWN_INT); - /* Acknowledge existing interrupts */ - writel(~0, keypad->reg_base + KEYPAD_UNKNOWN_INT_STS); - - return 0; -} - -static int nspire_keypad_open(struct input_dev *input) -{ - struct nspire_keypad *keypad = input_get_drvdata(input); - int error; - - error = clk_prepare_enable(keypad->clk); - if (error) - return error; - - error = nspire_keypad_chip_init(keypad); - if (error) { - clk_disable_unprepare(keypad->clk); - return error; - } - return 0; } @@ -152,6 +134,11 @@ static void nspire_keypad_close(struct input_dev *input) { struct nspire_keypad *keypad = input_get_drvdata(input); + /* Disable interrupts */ + writel(0, keypad->reg_base + KEYPAD_INTMSK); + /* Acknowledge existing interrupts */ + writel(~0, keypad->reg_base + KEYPAD_INT); + clk_disable_unprepare(keypad->clk); } @@ -210,6 +197,25 @@ static int nspire_keypad_probe(struct platform_device *pdev) return -ENOMEM; } + error = clk_prepare_enable(keypad->clk); + if (error) { + dev_err(&pdev->dev, "failed to enable clock\n"); + return error; + } + + /* Disable interrupts */ + writel(0, keypad->reg_base + KEYPAD_INTMSK); + /* Acknowledge existing interrupts */ + writel(~0, keypad->reg_base + KEYPAD_INT); + + /* Disable GPIO interrupts to prevent hanging on touchpad */ + /* Possibly used to detect touchpad events */ + writel(0, keypad->reg_base + KEYPAD_UNKNOWN_INT); + /* Acknowledge existing GPIO interrupts */ + writel(~0, keypad->reg_base + KEYPAD_UNKNOWN_INT_STS); + + clk_disable_unprepare(keypad->clk); + input_set_drvdata(input, keypad); input->id.bustype = BUS_HOST;