This is a note to let you know that I've just added the patch titled net: stmmac: dwmac-sun8i: Provide TX and RX fifo sizes to the 5.10-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: net-stmmac-dwmac-sun8i-provide-tx-and-rx-fifo-sizes.patch and it can be found in the queue-5.10 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit bde67090213d6102bb63828e412f6e6c8a291b5d Author: Corentin Labbe <clabbe@xxxxxxxxxxxx> Date: Fri Mar 19 13:44:22 2021 +0000 net: stmmac: dwmac-sun8i: Provide TX and RX fifo sizes [ Upstream commit 014dfa26ce1c647af09bf506285ef67e0e3f0a6b ] MTU cannot be changed on dwmac-sun8i. (ip link set eth0 mtu xxx returning EINVAL) This is due to tx_fifo_size being 0, since this value is used to compute valid MTU range. Like dwmac-sunxi (with commit 806fd188ce2a ("net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes")) dwmac-sun8i need to have tx and rx fifo sizes set. I have used values from datasheets. After this patch, setting a non-default MTU (like 1000) value works and network is still useable. Tested-on: sun8i-h3-orangepi-pc Tested-on: sun8i-r40-bananapi-m2-ultra Tested-on: sun50i-a64-bananapi-m64 Tested-on: sun50i-h5-nanopi-neo-plus2 Tested-on: sun50i-h6-pine-h64 Fixes: 9f93ac8d408 ("net-next: stmmac: Add dwmac-sun8i") Reported-by: Belisko Marek <marek.belisko@xxxxxxxxx> Signed-off-by: Corentin Labbe <clabbe@xxxxxxxxxxxx> Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c index a5e0eff4a387..9f5ccf1a0a54 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c @@ -1217,6 +1217,8 @@ static int sun8i_dwmac_probe(struct platform_device *pdev) plat_dat->init = sun8i_dwmac_init; plat_dat->exit = sun8i_dwmac_exit; plat_dat->setup = sun8i_dwmac_setup; + plat_dat->tx_fifo_size = 4096; + plat_dat->rx_fifo_size = 16384; ret = sun8i_dwmac_set_syscon(&pdev->dev, plat_dat); if (ret)