This is a note to let you know that I've just added the patch titled
mlxsw: spectrum_ethtool: Add an external speed to PTYS register
to the 5.11-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mlxsw-spectrum_ethtool-add-an-external-speed-to-ptys-register.patch
and it can be found in the queue-5.11 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From ae9b24ddb69b4e31cda1b5e267a5a08a1db11717 Mon Sep 17 00:00:00 2001
From: Danielle Ratson <danieller@xxxxxxxxxx>
Date: Thu, 25 Feb 2021 18:57:20 +0200
Subject: mlxsw: spectrum_ethtool: Add an external speed to PTYS register
From: Danielle Ratson <danieller@xxxxxxxxxx>
commit ae9b24ddb69b4e31cda1b5e267a5a08a1db11717 upstream.
Currently, only external bits are added to the PTYS register, whereas
there is one external bit that is wrongly marked as internal, and so was
recently removed from the register.
Add that bit to the PTYS register again, as this bit is no longer
internal.
Its removal resulted in '100000baseLR4_ER4/Full' link mode no longer
being supported, causing a regression on some setups.
Fixes: 5bf01b571cf4 ("mlxsw: spectrum_ethtool: Remove internal speeds from PTYS register")
Signed-off-by: Danielle Ratson <danieller@xxxxxxxxxx>
Reported-by: Eddie Shklaer <eddies@xxxxxxxxxx>
Tested-by: Eddie Shklaer <eddies@xxxxxxxxxx>
Reviewed-by: Jiri Pirko <jiri@xxxxxxxxxx>
Signed-off-by: Ido Schimmel <idosch@xxxxxxxxxx>
Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/mellanox/mlxsw/reg.h | 1 +
drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c | 5 +++++
drivers/net/ethernet/mellanox/mlxsw/switchx2.c | 3 ++-
3 files changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -4430,6 +4430,7 @@ MLXSW_ITEM32(reg, ptys, ext_eth_proto_ca
#define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_CR4 BIT(20)
#define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_SR4 BIT(21)
#define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_KR4 BIT(22)
+#define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_LR4_ER4 BIT(23)
#define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_CR BIT(27)
#define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_KR BIT(28)
#define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_SR BIT(29)
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c
@@ -1171,6 +1171,11 @@ static const struct mlxsw_sp1_port_link_
.mask_ethtool = ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT,
.speed = SPEED_100000,
},
+ {
+ .mask = MLXSW_REG_PTYS_ETH_SPEED_100GBASE_LR4_ER4,
+ .mask_ethtool = ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT,
+ .speed = SPEED_100000,
+ },
};
#define MLXSW_SP1_PORT_LINK_MODE_LEN ARRAY_SIZE(mlxsw_sp1_port_link_mode)
--- a/drivers/net/ethernet/mellanox/mlxsw/switchx2.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/switchx2.c
@@ -613,7 +613,8 @@ static const struct mlxsw_sx_port_link_m
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_100GBASE_CR4 |
MLXSW_REG_PTYS_ETH_SPEED_100GBASE_SR4 |
- MLXSW_REG_PTYS_ETH_SPEED_100GBASE_KR4,
+ MLXSW_REG_PTYS_ETH_SPEED_100GBASE_KR4 |
+ MLXSW_REG_PTYS_ETH_SPEED_100GBASE_LR4_ER4,
.speed = 100000,
},
};
Patches currently in stable-queue which might be from danieller@xxxxxxxxxx are
queue-5.11/mlxsw-spectrum_ethtool-add-an-external-speed-to-ptys-register.patch
queue-5.11/selftests-forwarding-fix-race-condition-in-mirror-installation.patch
