This is a note to let you know that I've just added the patch titled
i2c: i2c-qcom-geni: Add shutdown callback for i2c
to the 5.11-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
i2c-i2c-qcom-geni-add-shutdown-callback-for-i2c.patch
and it can be found in the queue-5.11 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From e0371298ddc51761be257698554ea507ac8bf831 Mon Sep 17 00:00:00 2001
From: Roja Rani Yarubandi <rojay@xxxxxxxxxxxxxx>
Date: Fri, 8 Jan 2021 20:35:45 +0530
Subject: i2c: i2c-qcom-geni: Add shutdown callback for i2c
From: Roja Rani Yarubandi <rojay@xxxxxxxxxxxxxx>
commit e0371298ddc51761be257698554ea507ac8bf831 upstream.
If the hardware is still accessing memory after SMMU translation
is disabled (as part of smmu shutdown callback), then the
IOVAs (I/O virtual address) which it was using will go on the bus
as the physical addresses which will result in unknown crashes
like NoC/interconnect errors.
So, implement shutdown callback to i2c driver to stop on-going transfer
and unmap DMA mappings during system "reboot" or "shutdown".
Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller")
Signed-off-by: Roja Rani Yarubandi <rojay@xxxxxxxxxxxxxx>
Reviewed-by: Akash Asthana <akashast@xxxxxxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-qcom-geni.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -375,6 +375,32 @@ static void geni_i2c_tx_msg_cleanup(stru
}
}
+static void geni_i2c_stop_xfer(struct geni_i2c_dev *gi2c)
+{
+ int ret;
+ u32 geni_status;
+ struct i2c_msg *cur;
+
+ /* Resume device, as runtime suspend can happen anytime during transfer */
+ ret = pm_runtime_get_sync(gi2c->se.dev);
+ if (ret < 0) {
+ dev_err(gi2c->se.dev, "Failed to resume device: %d\n", ret);
+ return;
+ }
+
+ geni_status = readl_relaxed(gi2c->se.base + SE_GENI_STATUS);
+ if (geni_status & M_GENI_CMD_ACTIVE) {
+ cur = gi2c->cur;
+ geni_i2c_abort_xfer(gi2c);
+ if (cur->flags & I2C_M_RD)
+ geni_i2c_rx_msg_cleanup(gi2c, cur);
+ else
+ geni_i2c_tx_msg_cleanup(gi2c, cur);
+ }
+
+ pm_runtime_put_sync_suspend(gi2c->se.dev);
+}
+
static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
u32 m_param)
{
@@ -650,6 +676,13 @@ static int geni_i2c_remove(struct platfo
return 0;
}
+static void geni_i2c_shutdown(struct platform_device *pdev)
+{
+ struct geni_i2c_dev *gi2c = platform_get_drvdata(pdev);
+
+ geni_i2c_stop_xfer(gi2c);
+}
+
static int __maybe_unused geni_i2c_runtime_suspend(struct device *dev)
{
int ret;
@@ -714,6 +747,7 @@ MODULE_DEVICE_TABLE(of, geni_i2c_dt_matc
static struct platform_driver geni_i2c_driver = {
.probe = geni_i2c_probe,
.remove = geni_i2c_remove,
+ .shutdown = geni_i2c_shutdown,
.driver = {
.name = "geni_i2c",
.pm = &geni_i2c_pm_ops,
Patches currently in stable-queue which might be from rojay@xxxxxxxxxxxxxx are
queue-5.11/i2c-i2c-qcom-geni-add-shutdown-callback-for-i2c.patch
