This is a note to let you know that I've just added the patch titled arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card to the 4.19-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm64-dts-allwinner-drop-non-removable-from-sopine-l.patch and it can be found in the queue-4.19 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 74c963b6237e0c35bd46d06a63cb3b75543a5b18 Author: Andre Przywara <andre.przywara@xxxxxxx> Date: Wed Jan 13 15:26:26 2021 +0000 arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card [ Upstream commit 941432d007689f3774646e41a1439228b6c6ee0e ] The SD card on the SoPine SoM module is somewhat concealed, so was originally defined as "non-removable". However there is a working card-detect pin (tested on two different SoM versions), and in certain SoM base boards it might be actually accessible at runtime. Also the Pine64-LTS shares the SoPine base .dtsi, so inherited the non-removable flag, even though the SD card slot is perfectly accessible and usable there. (It turns out that just *my* board has a broken card detect switch, so I originally thought CD wouldn't work on the LTS.) Drop the "non-removable" flag to describe the SD card slot properly. Fixes: c3904a269891 ("arm64: allwinner: a64: add DTSI file for SoPine SoM") Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx> Acked-by: Chen-Yu Tsai <wens@xxxxxxxx> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx> Link: https://lore.kernel.org/r/20210113152630.28810-5-andre.przywara@xxxxxxx Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi index 6723b8695e0bb..ca39084fddc0b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi @@ -51,7 +51,6 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; - non-removable; disable-wp; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */