This is a note to let you know that I've just added the patch titled
ata: ahci_brcm: Add back regulators management
to the 5.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
ata-ahci_brcm-add-back-regulators-management.patch
and it can be found in the queue-5.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 97370f1478617be9adc629161c39bb8ccf443cd7
Author: Florian Fainelli <f.fainelli@xxxxxxxxx>
Date: Fri Jan 29 10:28:45 2021 -0800
ata: ahci_brcm: Add back regulators management
[ Upstream commit 10340f8d7b6dd54e616339c8ccb2f397133ebea0 ]
While reworking the resources management and departing from using
ahci_platform_enable_resources() which did not allow a proper step
separation like we need, we unfortunately lost the ability to control
AHCI regulators. This broke some Broadcom STB systems that do expect
regulators to be turned on to link up with attached hard drives.
Fixes: c0cdf2ac4b5b ("ata: ahci_brcm: Fix AHCI resources management")
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: Jens Axboe <axboe@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 66a570d0da837..067b55cc157ef 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -361,6 +361,10 @@ static int brcm_ahci_resume(struct device *dev)
if (ret)
return ret;
+ ret = ahci_platform_enable_regulators(hpriv);
+ if (ret)
+ goto out_disable_clks;
+
brcm_sata_init(priv);
brcm_sata_phys_enable(priv);
brcm_sata_alpm_init(hpriv);
@@ -390,6 +394,8 @@ static int brcm_ahci_resume(struct device *dev)
ahci_platform_disable_phys(hpriv);
out_disable_phys:
brcm_sata_phys_disable(priv);
+ ahci_platform_disable_regulators(hpriv);
+out_disable_clks:
ahci_platform_disable_clks(hpriv);
return ret;
}
@@ -463,6 +469,10 @@ static int brcm_ahci_probe(struct platform_device *pdev)
if (ret)
goto out_reset;
+ ret = ahci_platform_enable_regulators(hpriv);
+ if (ret)
+ goto out_disable_clks;
+
/* Must be first so as to configure endianness including that
* of the standard AHCI register space.
*/
@@ -472,7 +482,7 @@ static int brcm_ahci_probe(struct platform_device *pdev)
priv->port_mask = brcm_ahci_get_portmask(hpriv, priv);
if (!priv->port_mask) {
ret = -ENODEV;
- goto out_disable_clks;
+ goto out_disable_regulators;
}
/* Must be done before ahci_platform_enable_phys() */
@@ -497,6 +507,8 @@ static int brcm_ahci_probe(struct platform_device *pdev)
ahci_platform_disable_phys(hpriv);
out_disable_phys:
brcm_sata_phys_disable(priv);
+out_disable_regulators:
+ ahci_platform_disable_regulators(hpriv);
out_disable_clks:
ahci_platform_disable_clks(hpriv);
out_reset:
