This is a note to let you know that I've just added the patch titled
net: axienet: Handle deferred probe on clock properly
to the 5.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
net-axienet-handle-deferred-probe-on-clock-properly.patch
and it can be found in the queue-5.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit a417e77651b716dcd7c4f17b453ca2374fe103bf
Author: Robert Hancock <robert.hancock@xxxxxxxxxx>
Date: Fri Feb 12 18:17:48 2021 -0600
net: axienet: Handle deferred probe on clock properly
[ Upstream commit 57baf8cc70ea4cf5503c9d42f31f6a86d7f5ff1a ]
This driver is set up to use a clock mapping in the device tree if it is
present, but still work without one for backward compatibility. However,
if getting the clock returns -EPROBE_DEFER, then we need to abort and
return that error from our driver initialization so that the probe can
be retried later after the clock is set up.
Move clock initialization to earlier in the process so we do not waste as
much effort if the clock is not yet available. Switch to use
devm_clk_get_optional and abort initialization on any error reported.
Also enable the clock regardless of whether the controller is using an MDIO
bus, as the clock is required in any case.
Fixes: 09a0354cadec267be7f ("net: axienet: Use clock framework to get device clock rate")
Signed-off-by: Robert Hancock <robert.hancock@xxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index bb6e52f3bdf9b..f98318d93ce72 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -1689,6 +1689,18 @@ static int axienet_probe(struct platform_device *pdev)
lp->options = XAE_OPTION_DEFAULTS;
lp->rx_bd_num = RX_BD_NUM_DEFAULT;
lp->tx_bd_num = TX_BD_NUM_DEFAULT;
+
+ lp->clk = devm_clk_get_optional(&pdev->dev, NULL);
+ if (IS_ERR(lp->clk)) {
+ ret = PTR_ERR(lp->clk);
+ goto free_netdev;
+ }
+ ret = clk_prepare_enable(lp->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to enable clock: %d\n", ret);
+ goto free_netdev;
+ }
+
/* Map device registers */
ethres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
lp->regs = devm_ioremap_resource(&pdev->dev, ethres);
@@ -1836,20 +1848,6 @@ static int axienet_probe(struct platform_device *pdev)
lp->phy_node = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
if (lp->phy_node) {
- lp->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(lp->clk)) {
- dev_warn(&pdev->dev, "Failed to get clock: %ld\n",
- PTR_ERR(lp->clk));
- lp->clk = NULL;
- } else {
- ret = clk_prepare_enable(lp->clk);
- if (ret) {
- dev_err(&pdev->dev, "Unable to enable clock: %d\n",
- ret);
- goto free_netdev;
- }
- }
-
ret = axienet_mdio_setup(lp);
if (ret)
dev_warn(&pdev->dev,
