This is a note to let you know that I've just added the patch titled i2c: iproc: handle only slave interrupts which are enabled to the 5.10-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: i2c-iproc-handle-only-slave-interrupts-which-are-ena.patch and it can be found in the queue-5.10 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit e2b57da79b5f68aa1e21fadf3459729c12cb7813 Author: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx> Date: Mon Nov 2 09:24:29 2020 +0530 i2c: iproc: handle only slave interrupts which are enabled [ Upstream commit 545f4011e156554d704d6278245d54543f6680d1 ] Handle only slave interrupts which are enabled. The IS_OFFSET register contains the interrupt status bits which will be set regardless of the enabling of the corresponding interrupt condition. One must therefore look at both IS_OFFSET and IE_OFFSET to determine whether an interrupt condition is set and enabled. Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx> Acked-by: Ray Jui <ray.jui@xxxxxxxxxxxx> Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c index d8295b1c379d1..b98433c04d184 100644 --- a/drivers/i2c/busses/i2c-bcm-iproc.c +++ b/drivers/i2c/busses/i2c-bcm-iproc.c @@ -505,12 +505,17 @@ static void bcm_iproc_i2c_process_m_event(struct bcm_iproc_i2c_dev *iproc_i2c, static irqreturn_t bcm_iproc_i2c_isr(int irq, void *data) { struct bcm_iproc_i2c_dev *iproc_i2c = data; - u32 status = iproc_i2c_rd_reg(iproc_i2c, IS_OFFSET); + u32 slave_status; + u32 status; bool ret; - u32 sl_status = status & ISR_MASK_SLAVE; - if (sl_status) { - ret = bcm_iproc_i2c_slave_isr(iproc_i2c, sl_status); + status = iproc_i2c_rd_reg(iproc_i2c, IS_OFFSET); + /* process only slave interrupt which are enabled */ + slave_status = status & iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET) & + ISR_MASK_SLAVE; + + if (slave_status) { + ret = bcm_iproc_i2c_slave_isr(iproc_i2c, slave_status); if (ret) return IRQ_HANDLED; else