This is a note to let you know that I've just added the patch titled arm64: dts: allwinner: H6: Allow up to 150 MHz MMC bus frequency to the 5.10-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm64-dts-allwinner-h6-allow-up-to-150-mhz-mmc-bus-f.patch and it can be found in the queue-5.10 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 3e6e31f83d46a52770a1a7508c58c35cd8f0822f Author: Andre Przywara <andre.przywara@xxxxxxx> Date: Wed Jan 13 15:26:27 2021 +0000 arm64: dts: allwinner: H6: Allow up to 150 MHz MMC bus frequency [ Upstream commit cfe6c487b9a1abc6197714ec5605716a5428cf03 ] The H6 manual explicitly lists a frequency limit of 150 MHz for the bus frequency of the MMC controllers. So far we had no explicit limits in the DT, which limited eMMC to the spec defined frequencies, or whatever the driver defines (both Linux and FreeBSD use 52 MHz here). Put those maximum frequencies in the SoC .dtsi, to allow higher speed modes (which still would need to be explicitly enabled, per board). Tested with an eMMC using HS-200 on a Pine H64. Running at the spec'ed 200 MHz indeed fails with I/O errors, but 150 MHz seems to work stably. Fixes: 8f54bd1595b3 ("arm64: allwinner: h6: add device tree nodes for MMC controllers") Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx> Acked-by: Chen-Yu Tsai <wens@xxxxxxxx> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx> Link: https://lore.kernel.org/r/20210113152630.28810-6-andre.przywara@xxxxxxx Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 0361f5f467093..4592fb7a6161d 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -436,6 +436,7 @@ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; + max-frequency = <150000000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -452,6 +453,7 @@ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; + max-frequency = <150000000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -468,6 +470,7 @@ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; + max-frequency = <150000000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>;