This is a note to let you know that I've just added the patch titled
mmc: sdhci-of-arasan: Allow configuring zero tap values
to the 5.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mmc-sdhci-of-arasan-allow-configuring-zero-tap-values.patch
and it can be found in the queue-5.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 9e9534329306fcd7ea1b84f14860a3c04ebe7f1a Mon Sep 17 00:00:00 2001
From: Manish Narani <manish.narani@xxxxxxxxxx>
Date: Mon, 16 Nov 2020 14:02:43 +0530
Subject: mmc: sdhci-of-arasan: Allow configuring zero tap values
From: Manish Narani <manish.narani@xxxxxxxxxx>
commit 9e9534329306fcd7ea1b84f14860a3c04ebe7f1a upstream.
Allow configuring the Output and Input tap values with zero to avoid
failures in some cases (one of them is SD boot mode) where the output
and input tap values may be already set to non-zero.
Fixes: a5c8b2ae2e51 ("mmc: sdhci-of-arasan: Add support for ZynqMP Platform Tap Delays Setup")
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xxxxxxxxxx>
Signed-off-by: Manish Narani <manish.narani@xxxxxxxxxx>
Acked-by: Michal Simek <michal.simek@xxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Link: https://lore.kernel.org/r/1605515565-117562-2-git-send-email-manish.narani@xxxxxxxxxx
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-of-arasan.c | 40 +++++++------------------------------
1 file changed, 8 insertions(+), 32 deletions(-)
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -600,14 +600,8 @@ static int sdhci_zynqmp_sdcardclk_set_ph
u8 tap_delay, tap_max = 0;
int ret;
- /*
- * This is applicable for SDHCI_SPEC_300 and above
- * ZynqMP does not set phase for <=25MHz clock.
- * If degrees is zero, no need to do anything.
- */
- if (host->version < SDHCI_SPEC_300 ||
- host->timing == MMC_TIMING_LEGACY ||
- host->timing == MMC_TIMING_UHS_SDR12 || !degrees)
+ /* This is applicable for SDHCI_SPEC_300 and above */
+ if (host->version < SDHCI_SPEC_300)
return 0;
switch (host->timing) {
@@ -668,14 +662,8 @@ static int sdhci_zynqmp_sampleclk_set_ph
u8 tap_delay, tap_max = 0;
int ret;
- /*
- * This is applicable for SDHCI_SPEC_300 and above
- * ZynqMP does not set phase for <=25MHz clock.
- * If degrees is zero, no need to do anything.
- */
- if (host->version < SDHCI_SPEC_300 ||
- host->timing == MMC_TIMING_LEGACY ||
- host->timing == MMC_TIMING_UHS_SDR12 || !degrees)
+ /* This is applicable for SDHCI_SPEC_300 and above */
+ if (host->version < SDHCI_SPEC_300)
return 0;
switch (host->timing) {
@@ -733,14 +721,8 @@ static int sdhci_versal_sdcardclk_set_ph
struct sdhci_host *host = sdhci_arasan->host;
u8 tap_delay, tap_max = 0;
- /*
- * This is applicable for SDHCI_SPEC_300 and above
- * Versal does not set phase for <=25MHz clock.
- * If degrees is zero, no need to do anything.
- */
- if (host->version < SDHCI_SPEC_300 ||
- host->timing == MMC_TIMING_LEGACY ||
- host->timing == MMC_TIMING_UHS_SDR12 || !degrees)
+ /* This is applicable for SDHCI_SPEC_300 and above */
+ if (host->version < SDHCI_SPEC_300)
return 0;
switch (host->timing) {
@@ -804,14 +786,8 @@ static int sdhci_versal_sampleclk_set_ph
struct sdhci_host *host = sdhci_arasan->host;
u8 tap_delay, tap_max = 0;
- /*
- * This is applicable for SDHCI_SPEC_300 and above
- * Versal does not set phase for <=25MHz clock.
- * If degrees is zero, no need to do anything.
- */
- if (host->version < SDHCI_SPEC_300 ||
- host->timing == MMC_TIMING_LEGACY ||
- host->timing == MMC_TIMING_UHS_SDR12 || !degrees)
+ /* This is applicable for SDHCI_SPEC_300 and above */
+ if (host->version < SDHCI_SPEC_300)
return 0;
switch (host->timing) {
Patches currently in stable-queue which might be from manish.narani@xxxxxxxxxx are
queue-5.9/mmc-sdhci-of-arasan-use-mask-writes-for-tap-delays.patch
queue-5.9/mmc-sdhci-of-arasan-issue-dll-reset-explicitly.patch
queue-5.9/mmc-sdhci-of-arasan-allow-configuring-zero-tap-values.patch
