This is a note to let you know that I've just added the patch titled arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy to the 5.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm-dts-imx6qdl-udoo-fix-rgmii-phy-mode-for-ksz9031-.patch and it can be found in the queue-5.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 6f5a77a7d0f944725fdc1d0c7a4cd276b4d21dd2 Author: Sergey Matyukevich <geomatsi@xxxxxxxxx> Date: Sat Oct 24 23:11:20 2020 +0300 arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy [ Upstream commit 7dd8f0ba88fce98e2953267a66af74c6f4792a56 ] Commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") fixed micrel phy driver adding proper support for phy modes. Adapt imx6q-udoo board phy settings : explicitly set required delay configuration using "rgmii-id". Fixes: cbd54fe0b2bc ("ARM: dts: imx6dl-udoo: Add board support based off imx6q-udoo") Signed-off-by: Sergey Matyukevich <geomatsi@xxxxxxxxx> Reviewed-by: Fabio Estevam <festevam@xxxxxxxxx> Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index 776bfc77f89d0..16672cbada287 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -98,7 +98,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; };