This is a note to let you know that I've just added the patch titled arm64: dts: allwinner: h5: libretech-all-h5-cc: Enable RGMII RX/TX delay on PHY to the 5.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm64-dts-allwinner-h5-libretech-all-h5-cc-enable-rg.patch and it can be found in the queue-5.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 4994fe5fcbccbd2a3fd34afd40b503692b259967 Author: Chen-Yu Tsai <wens@xxxxxxxx> Date: Sun Oct 25 00:25:14 2020 +0800 arm64: dts: allwinner: h5: libretech-all-h5-cc: Enable RGMII RX/TX delay on PHY [ Upstream commit 2bd8570d20c88909b8be3251727a26476b02652c ] The Ethernet PHY on the Libre Computer ALL-H5-CC has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 60d0426d7603 ("arm64: dts: allwinner: h5: Add Libre Computer ALL-H5-CC H5 board") Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx> Acked-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx> Link: https://lore.kernel.org/r/20201024162515.30032-9-wens@xxxxxxxxxx Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts index df1b9263ad0e2..6e30a564c87f6 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts @@ -36,7 +36,7 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_gmac_3v3>; phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; /delete-property/ allwinner,leds-active-low; status = "okay"; };