This is a note to let you know that I've just added the patch titled xhci: Return if xHCI doesn't support LPM to the 4.19-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: xhci-return-if-xhci-doesn-t-support-lpm.patch and it can be found in the queue-4.19 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From f0c472a6da51f9fac15e80fe2fd9c83b68754cff Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> Date: Wed, 24 Jun 2020 16:59:48 +0300 Subject: xhci: Return if xHCI doesn't support LPM From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> commit f0c472a6da51f9fac15e80fe2fd9c83b68754cff upstream. Just return if xHCI is quirked to disable LPM. We can save some time from reading registers and doing spinlocks. Add stable tag as we want this patch together with the next one, "Poll for U0 after disabling USB2 LPM" which fixes a suspend issue for some USB2 LPM devices Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20200624135949.22611-5-mathias.nyman@xxxxxxxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/host/xhci.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4305,6 +4305,9 @@ static int xhci_set_usb2_hardware_lpm(st int hird, exit_latency; int ret; + if (xhci->quirks & XHCI_HW_LPM_DISABLE) + return -EPERM; + if (hcd->speed >= HCD_USB3 || !xhci->hw_lpm_support || !udev->lpm_capable) return -EPERM; @@ -4327,7 +4330,7 @@ static int xhci_set_usb2_hardware_lpm(st xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n", enable ? "enable" : "disable", port_num + 1); - if (enable && !(xhci->quirks & XHCI_HW_LPM_DISABLE)) { + if (enable) { /* Host supports BESL timeout instead of HIRD */ if (udev->usb2_hw_lpm_besl_capable) { /* if device doesn't have a preferred BESL value use a Patches currently in stable-queue which might be from kai.heng.feng@xxxxxxxxxxxxx are queue-4.19/xhci-return-if-xhci-doesn-t-support-lpm.patch queue-4.19/alsa-hda-realtek-enable-mute-led-on-an-hp-system.patch queue-4.19/alsa-hda-realtek-enable-micmute-led-on-and-hp-system.patch queue-4.19/xhci-poll-for-u0-after-disabling-usb2-lpm.patch