This is a note to let you know that I've just added the patch titled usb: dwc3: gadget: Do link recovery for SS and SSP to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: usb-dwc3-gadget-do-link-recovery-for-ss-and-ssp.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From d0550cd20e52558ecf6847a0f96ebd5d944c17e4 Mon Sep 17 00:00:00 2001 From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx> Date: Fri, 31 Jan 2020 16:25:50 -0800 Subject: usb: dwc3: gadget: Do link recovery for SS and SSP From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx> commit d0550cd20e52558ecf6847a0f96ebd5d944c17e4 upstream. The controller always supports link recovery for device in SS and SSP. Remove the speed limit check. Also, when the device is in RESUME or RESET state, it means the controller received the resume/reset request. The driver must send the link recovery to acknowledge the request. They are valid states for the driver to send link recovery. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Fixes: ee5cd41c9117 ("usb: dwc3: Update speed checks for SuperSpeedPlus") Signed-off-by: Thinh Nguyen <thinhn@xxxxxxxxxxxx> Signed-off-by: Felipe Balbi <balbi@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/dwc3/gadget.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1641,7 +1641,6 @@ static int __dwc3_gadget_wakeup(struct d u32 reg; u8 link_state; - u8 speed; /* * According to the Databook Remote wakeup request should @@ -1651,16 +1650,13 @@ static int __dwc3_gadget_wakeup(struct d */ reg = dwc3_readl(dwc->regs, DWC3_DSTS); - speed = reg & DWC3_DSTS_CONNECTSPD; - if ((speed == DWC3_DSTS_SUPERSPEED) || - (speed == DWC3_DSTS_SUPERSPEED_PLUS)) - return 0; - link_state = DWC3_DSTS_USBLNKST(reg); switch (link_state) { + case DWC3_LINK_STATE_RESET: case DWC3_LINK_STATE_RX_DET: /* in HS, means Early Suspend */ case DWC3_LINK_STATE_U3: /* in HS, means SUSPEND */ + case DWC3_LINK_STATE_RESUME: break; default: return -EINVAL; Patches currently in stable-queue which might be from Thinh.Nguyen@xxxxxxxxxxxx are queue-4.14/usb-dwc3-gadget-do-link-recovery-for-ss-and-ssp.patch