This is a note to let you know that I've just added the patch titled mmc: alcor: don't write data before command has completed to the 5.0-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: mmc-alcor-don-t-write-data-before-command-has-completed.patch and it can be found in the queue-5.0 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From 157c99c5a2956a9ab1ae12de0136a2d8a1b1a307 Mon Sep 17 00:00:00 2001 From: Daniel Drake <drake@xxxxxxxxxxxx> Date: Tue, 26 Mar 2019 15:04:14 +0800 Subject: mmc: alcor: don't write data before command has completed From: Daniel Drake <drake@xxxxxxxxxxxx> commit 157c99c5a2956a9ab1ae12de0136a2d8a1b1a307 upstream. The alcor driver is setting up data transfer and submitting the associated MMC command at the same time. While this works most of the time, it occasionally causes problems upon write. In the working case, after setting up the data transfer and submitting the MMC command, an interrupt comes in a moment later with CMD_END and WRITE_BUF_RDY bits set. The data transfer then happens without problem. However, on occasion, the interrupt that arrives at that point only has WRITE_BUF_RDY set. The hardware notifies that it's ready to write data, but the associated MMC command is still running. Regardless, the driver was proceeding to write data immediately, and that would then cause another interrupt indicating data CRC error, and the write would fail. Additionally, the transfer setup function alcor_trigger_data_transfer() was being called 3 times for each write operation, which was confusing and may be contributing to this issue. Solve this by tweaking the driver behaviour to follow the sequence observed in the original ampe_stor vendor driver: 1. When starting request handling, write 0 to DATA_XFER_CTRL 2. Submit the command 3. Wait for CMD_END interrupt and then trigger data transfer 4. For the PIO case, trigger the next step of the data transfer only upon the following DATA_END interrupt, which occurs after the block has been written. I confirmed that the read path still works (DMA & PIO) and also now presents more consistency with the operations performed by ampe_stor. Signed-off-by: Daniel Drake <drake@xxxxxxxxxxxx> Fixes: c5413ad815a6 ("mmc: add new Alcor Micro Cardreader SD/MMC driver") Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/mmc/host/alcor.c | 34 +++++++++++++--------------------- 1 file changed, 13 insertions(+), 21 deletions(-) --- a/drivers/mmc/host/alcor.c +++ b/drivers/mmc/host/alcor.c @@ -48,7 +48,6 @@ struct alcor_sdmmc_host { struct mmc_command *cmd; struct mmc_data *data; unsigned int dma_on:1; - unsigned int early_data:1; struct mutex cmd_mutex; @@ -144,8 +143,7 @@ static void alcor_data_set_dma(struct al host->sg_count--; } -static void alcor_trigger_data_transfer(struct alcor_sdmmc_host *host, - bool early) +static void alcor_trigger_data_transfer(struct alcor_sdmmc_host *host) { struct alcor_pci_priv *priv = host->alcor_pci; struct mmc_data *data = host->data; @@ -155,13 +153,6 @@ static void alcor_trigger_data_transfer( ctrl |= AU6601_DATA_WRITE; if (data->host_cookie == COOKIE_MAPPED) { - if (host->early_data) { - host->early_data = false; - return; - } - - host->early_data = early; - alcor_data_set_dma(host); ctrl |= AU6601_DATA_DMA_MODE; host->dma_on = 1; @@ -231,6 +222,7 @@ static void alcor_prepare_sg_miter(struc static void alcor_prepare_data(struct alcor_sdmmc_host *host, struct mmc_command *cmd) { + struct alcor_pci_priv *priv = host->alcor_pci; struct mmc_data *data = cmd->data; if (!data) @@ -248,7 +240,7 @@ static void alcor_prepare_data(struct al if (data->host_cookie != COOKIE_MAPPED) alcor_prepare_sg_miter(host); - alcor_trigger_data_transfer(host, true); + alcor_write8(priv, 0, AU6601_DATA_XFER_CTRL); } static void alcor_send_cmd(struct alcor_sdmmc_host *host, @@ -435,7 +427,7 @@ static int alcor_cmd_irq_done(struct alc if (!host->data) return false; - alcor_trigger_data_transfer(host, false); + alcor_trigger_data_transfer(host); host->cmd = NULL; return true; } @@ -456,7 +448,7 @@ static void alcor_cmd_irq_thread(struct if (!host->data) alcor_request_complete(host, 1); else - alcor_trigger_data_transfer(host, false); + alcor_trigger_data_transfer(host); host->cmd = NULL; } @@ -487,15 +479,9 @@ static int alcor_data_irq_done(struct al break; case AU6601_INT_READ_BUF_RDY: alcor_trf_block_pio(host, true); - if (!host->blocks) - break; - alcor_trigger_data_transfer(host, false); return 1; case AU6601_INT_WRITE_BUF_RDY: alcor_trf_block_pio(host, false); - if (!host->blocks) - break; - alcor_trigger_data_transfer(host, false); return 1; case AU6601_INT_DMA_END: if (!host->sg_count) @@ -508,8 +494,14 @@ static int alcor_data_irq_done(struct al break; } - if (intmask & AU6601_INT_DATA_END) - return 0; + if (intmask & AU6601_INT_DATA_END) { + if (!host->dma_on && host->blocks) { + alcor_trigger_data_transfer(host); + return 1; + } else { + return 0; + } + } return 1; } Patches currently in stable-queue which might be from drake@xxxxxxxxxxxx are queue-5.0/mmc-alcor-don-t-write-data-before-command-has-completed.patch queue-5.0/alsa-hda-realtek-enable-headset-mic-of-acer-travelmate-b114-21-with-alc233.patch