Re: Error: Could not complete request. Query: CREATE "INBOX.Sent" Reason Given: Permission denied

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/7/15, Cerephim <cerephim@xxxxxxxxx> wrote:
> I've spent days googling, and reading.  Lots of posts, no solutions.
>
> After the login page, I get:
> *ERROR: Could not complete request.*
> Query: CREATE "INBOX.Sent"
> Reason Given: Permission denied

As this is an error coming from the IMAP server, it is a problem with
your Cyrus setup and nothing to do with SquirrelMail, so your best bet
is asking on a Cyrus mailing list.  Also remember to check your IMAP
logs.

> I really could use some help.  Thanks!
>
> I'd go to dovecot, but I have several gigs of old mail in Cyrus'
> proprietary format...
>
> I've researched the docs, and tried everything (I think) that is suggested
> there.  Perhaps a new set of eyes will spot where I'm screwing up.
>
> SquirrelMail version: squirrelmail-1.4.22-4.el6.noarch
> Plugins
>   Installed Plugins
>     1. delete_move_next
>     2. squirrelspell
>     3. newmail
> PHP version: php-5.3.3-46.el6_6.x86_64
> Web Server: Apache httpd-2.2.15-47.el6.centos.x86_64
> IMAP Server: Cyrus-Imapd
> cyrus-sasl-lib-2.1.23-15.el6_6.2.x86_64
> cyrus-sasl-md5-2.1.23-15.el6_6.2.x86_64
> cyrus-imapd-utils-2.3.16-13.el6_6.x86_64
> cyrus-sasl-plain-2.1.23-15.el6_6.2.x86_64
> cyrus-sasl-gssapi-2.1.23-15.el6_6.2.x86_64
> cyrus-imapd-2.3.16-13.el6_6.x86_64
> cyrus-sasl-2.1.23-15.el6_6.2.x86_64
> SMTP Server: postfix-2.6.6-6.el6_7.1.x86_64
> Operating System: CentOS release 6.7 (Final)
> Browsers tried: IE 11.0.9600.18097CO  Firefox 42.0
>
> Error Messages: Left Pane
> ERROR: Could not complete request.
> Query: CREATE "INBOX.Sent"
> Reason Given: Permission denied
>
> Error Messages: Right Pane
> ERROR: Could not complete request.
> Query: SELECT "INBOX"
> Reason Given: Mailbox does not exist
>
> #####
>
> I created mailboxes with:
> cyradmin
> localhost>  cm user1
> localhost> cm user2
> localhost> lam user1
> anyone lrs
> localhost> lam user2
> anyone lrs
> localhost> sam user1 lrswipkxte
> usage: setaclmailbox mailbox id rights [id rights ...]
> localhost> sam user1 cyrus lrswipkxte
> localhost> sam user1 user1 lrswipkxte
> localhost> sam user2 cyrus lrswipkxte
> localhost> sam user2 user2 lrswipkxte
>
> The mailboxes created just fine...
>
> #####
>
> cat config.php
> <?php
>
> /**
>  * SquirrelMail Configuration File
>  * Created using the configure script, conf.pl
>  */
>
> global $version;
> $config_version = '1.4.0';
> $config_use_color = 1;
>
> $org_name      = "CombatAngel.com";
> $org_logo      = SM_PATH .
> 'images/rsz_angel-warrior-desktop-wallpaper2.jpg';
> $org_logo_width  = '640';
> $org_logo_height = '360';
> $org_title     = "Combat Angel Webmail";
> $signout_page  = '';
> $frame_top     = '_top';
>
> $provider_uri     = 'http://CombatAngel.com/';
>
> $provider_name     = 'Combat Angel';
>
> $motd = "";
>
> $squirrelmail_default_language = 'en_US';
> $default_charset       = 'iso-8859-1';
> $lossy_encoding        = false;
>
> $domain                 = 'localhost';
> $imapServerAddress      = 'localhost';
> $imapPort               = 143;
> $useSendmail            = false;
> $smtpServerAddress      = 'localhost';
> $smtpPort               = 25;
> $sendmail_path          = '/usr/sbin/sendmail';
> $sendmail_args          = '-i -t';
> $pop_before_smtp        = false;
> $pop_before_smtp_host   = '';
> $imap_server_type       = 'cyrus';
> $invert_time            = false;
> $optional_delimiter     = 'detect';
> $encode_header_key      = '';
>
> $default_folder_prefix          = '';
> $trash_folder                   = 'INBOX.Trash';
> $sent_folder                    = 'INBOX.Sent';
> $draft_folder                   = 'INBOX.Drafts';
> $default_move_to_trash          = true;
> $default_move_to_sent           = true;
> $default_save_as_draft          = true;
> $show_prefix_option             = true;
> $list_special_folders_first     = true;
> $use_special_folder_color       = true;
> $auto_expunge                   = true;
> $default_sub_of_inbox           = false;
> $show_contain_subfolders_option = true;
> $default_unseen_notify          = 2;
> $default_unseen_type            = 1;
> $auto_create_special            = true;
> $delete_folder                  = false;
> $noselect_fix_enable            = false;
>
> $data_dir                 = '/var/lib/squirrelmail/prefs/';
> $attachment_dir           = '/var/spool/squirrelmail/attach/';
> $dir_hash_level           = 0;
> $default_left_size        = '200';
> $force_username_lowercase = false;
> $default_use_priority     = true;
> $hide_sm_attributions     = false;
> $default_use_mdn          = true;
> $edit_identity            = true;
> $edit_name                = true;
> $hide_auth_header         = false;
> $allow_thread_sort        = true;
> $allow_server_sort        = true;
> $allow_charset_search     = true;
> $uid_support              = true;
>
> $plugins[0] = 'delete_move_next';
> $plugins[1] = 'squirrelspell';
> $plugins[2] = 'newmail';
>
> $theme_css = '';
> $theme_default = 0;
> $theme[0]['PATH'] = SM_PATH . 'themes/default_theme.php';
> $theme[0]['NAME'] = 'Default';
> $theme[1]['PATH'] = SM_PATH . 'themes/plain_blue_theme.php';
> $theme[1]['NAME'] = 'Plain Blue';
> $theme[2]['PATH'] = SM_PATH . 'themes/sandstorm_theme.php';
> $theme[2]['NAME'] = 'Sand Storm';
> $theme[3]['PATH'] = SM_PATH . 'themes/deepocean_theme.php';
> $theme[3]['NAME'] = 'Deep Ocean';
> $theme[4]['PATH'] = SM_PATH . 'themes/slashdot_theme.php';
> $theme[4]['NAME'] = 'Slashdot';
> $theme[5]['PATH'] = SM_PATH . 'themes/purple_theme.php';
> $theme[5]['NAME'] = 'Purple';
> $theme[6]['PATH'] = SM_PATH . 'themes/forest_theme.php';
> $theme[6]['NAME'] = 'Forest';
> $theme[7]['PATH'] = SM_PATH . 'themes/ice_theme.php';
> $theme[7]['NAME'] = 'Ice';
> $theme[8]['PATH'] = SM_PATH . 'themes/seaspray_theme.php';
> $theme[8]['NAME'] = 'Sea Spray';
> $theme[9]['PATH'] = SM_PATH . 'themes/bluesteel_theme.php';
> $theme[9]['NAME'] = 'Blue Steel';
> $theme[10]['PATH'] = SM_PATH . 'themes/dark_grey_theme.php';
> $theme[10]['NAME'] = 'Dark Grey';
> $theme[11]['PATH'] = SM_PATH . 'themes/high_contrast_theme.php';
> $theme[11]['NAME'] = 'High Contrast';
> $theme[12]['PATH'] = SM_PATH . 'themes/black_bean_burrito_theme.php';
> $theme[12]['NAME'] = 'Black Bean Burrito';
> $theme[13]['PATH'] = SM_PATH . 'themes/servery_theme.php';
> $theme[13]['NAME'] = 'Servery';
> $theme[14]['PATH'] = SM_PATH . 'themes/maize_theme.php';
> $theme[14]['NAME'] = 'Maize';
> $theme[15]['PATH'] = SM_PATH . 'themes/bluesnews_theme.php';
> $theme[15]['NAME'] = 'BluesNews';
> $theme[16]['PATH'] = SM_PATH . 'themes/deepocean2_theme.php';
> $theme[16]['NAME'] = 'Deep Ocean 2';
> $theme[17]['PATH'] = SM_PATH . 'themes/blue_grey_theme.php';
> $theme[17]['NAME'] = 'Blue Grey';
> $theme[18]['PATH'] = SM_PATH . 'themes/dompie_theme.php';
> $theme[18]['NAME'] = 'Dompie';
> $theme[19]['PATH'] = SM_PATH . 'themes/methodical_theme.php';
> $theme[19]['NAME'] = 'Methodical';
> $theme[20]['PATH'] = SM_PATH . 'themes/greenhouse_effect.php';
> $theme[20]['NAME'] = 'Greenhouse Effect (Changes)';
> $theme[21]['PATH'] = SM_PATH . 'themes/in_the_pink.php';
> $theme[21]['NAME'] = 'In The Pink (Changes)';
> $theme[22]['PATH'] = SM_PATH . 'themes/kind_of_blue.php';
> $theme[22]['NAME'] = 'Kind of Blue (Changes)';
> $theme[23]['PATH'] = SM_PATH . 'themes/monostochastic.php';
> $theme[23]['NAME'] = 'Monostochastic (Changes)';
> $theme[24]['PATH'] = SM_PATH . 'themes/shades_of_grey.php';
> $theme[24]['NAME'] = 'Shades of Grey (Changes)';
> $theme[25]['PATH'] = SM_PATH . 'themes/spice_of_life.php';
> $theme[25]['NAME'] = 'Spice of Life (Changes)';
> $theme[26]['PATH'] = SM_PATH . 'themes/spice_of_life_lite.php';
> $theme[26]['NAME'] = 'Spice of Life - Lite (Changes)';
> $theme[27]['PATH'] = SM_PATH . 'themes/spice_of_life_dark.php';
> $theme[27]['NAME'] = 'Spice of Life - Dark (Changes)';
> $theme[28]['PATH'] = SM_PATH . 'themes/christmas.php';
> $theme[28]['NAME'] = 'Holiday - Christmas';
> $theme[29]['PATH'] = SM_PATH . 'themes/darkness.php';
> $theme[29]['NAME'] = 'Darkness (Changes)';
> $theme[30]['PATH'] = SM_PATH . 'themes/random.php';
> $theme[30]['NAME'] = 'Random (Changes every login)';
> $theme[31]['PATH'] = SM_PATH . 'themes/midnight.php';
> $theme[31]['NAME'] = 'Midnight';
> $theme[32]['PATH'] = SM_PATH . 'themes/alien_glow.php';
> $theme[32]['NAME'] = 'Alien Glow';
> $theme[33]['PATH'] = SM_PATH . 'themes/dark_green.php';
> $theme[33]['NAME'] = 'Dark Green';
> $theme[34]['PATH'] = SM_PATH . 'themes/penguin.php';
> $theme[34]['NAME'] = 'Penguin';
>
> $default_use_javascript_addr_book = false;
> $abook_global_file = '';
> $abook_global_file_writeable = false;
> $abook_global_file_listing = true;
> $abook_file_line_length = 2048;
>
> $addrbook_dsn = '';
> $addrbook_table = 'address';
>
> $prefs_dsn = '';
> $prefs_table = 'userprefs';
> $prefs_user_field = 'user';
> $prefs_key_field = 'prefkey';
> $prefs_val_field = 'prefval';
> $addrbook_global_dsn = '';
> $addrbook_global_table = 'global_abook';
> $addrbook_global_writeable = false;
> $addrbook_global_listing = false;
>
> $no_list_for_subscribe = false;
> $smtp_auth_mech = 'none';
> $imap_auth_mech = 'login';
> $smtp_sitewide_user = '';
> $smtp_sitewide_pass = '';
> $use_imap_tls = false;
> $use_smtp_tls = false;
> $session_name = 'SQMSESSID';
> $only_secure_cookies     = true;
> $disable_security_tokens = false;
> $check_referrer          = '';
>
> $config_location_base    = '';
>
> @include SM_PATH . 'config/config_local.php';
>
> #####
>
> <?php
>
> /**
>  * Local config overrides.
>  *
>  * You can override the config.php settings here.
>  * Don't do it unless you know what you're doing.
>  * Use standard PHP syntax, see config.php for examples.
>  *
>  * @copyright &copy; 2002-2006 The SquirrelMail Project Team
>  * @license http://opensource.org/licenses/gpl-license.php GNU Public
> License
>  * @version $Id$
>  * @package squirrelmail
>  * @subpackage config
>  */
>
> $default_folder_prefix          = '';
> ?>
>
> #####
>
> cat imapd.conf
> configdirectory: /var/lib/imap
> partition-default: /var/spool/imap
> admins: cyrus cyradmin
> sievedir: /var/lib/imap/sieve
> sendmail: /usr/sbin/sendmail.postfix
> hashimapspool: true
> allowanonymouslogin:    no
> allowplaintext:         yes
> sasl_pwcheck_method: auxprop
> sasl_mech_list: CRAM-MD5 DIGEST-MD5 PLAIN
> tls_cert_file: /etc/pki/cyrus-imapd/cyrus-imapd.pem
> tls_key_file: /etc/pki/cyrus-imapd/cyrus-imapd.pem
> tls_ca_file: /etc/pki/tls/certs/ca-bundle.crt
> # uncomment this if you're operating in a DSCP environment (RFC-4594)
> # qosmarking: af13
>
> #####
>
> cat cyrus.conf
> # standard standalone server implementation
>
> START {
>   # do not delete this entry!
>   recover       cmd="ctl_cyrusdb -r"
>
>   # this is only necessary if using idled for IMAP IDLE
>   idled         cmd="idled"
> }
>
> # UNIX sockets start with a slash and are put into /var/lib/imap/sockets
> SERVICES {
>   # add or remove based on preferences
>   imap          cmd="imapd" listen="imap" prefork=5
>   imaps         cmd="imapd -s" listen="imaps" prefork=1
>   pop3          cmd="pop3d" listen="pop3" prefork=3
>   pop3s         cmd="pop3d -s" listen="pop3s" prefork=1
>   sieve         cmd="timsieved" listen="sieve" prefork=0
>
>   # these are only necessary if receiving/exporting usenet via NNTP
> #  nntp         cmd="nntpd" listen="nntp" prefork=3
> #  nntps                cmd="nntpd -s" listen="nntps" prefork=1
>
>   # at least one LMTP is required for delivery
> #  lmtp         cmd="lmtpd" listen="lmtp" prefork=0
>   lmtpunix      cmd="lmtpd" listen="/var/lib/imap/socket/lmtp" prefork=1
>
>   # this is only necessary if using notifications
> #  notify       cmd="notifyd" listen="/var/lib/imap/socket/notify"
> proto="udp" prefork=1
> }
>
> EVENTS {
>   # this is required
>   checkpoint    cmd="ctl_cyrusdb -c" period=30
>
>   # this is only necessary if using duplicate delivery suppression,
>   # Sieve or NNTP
>   delprune      cmd="cyr_expire -E 3" at=0400
>
>   # this is only necessary if caching TLS sessions
>   tlsprune      cmd="tls_prune" at=0400
> }
>
> #####
>
> # cat main.cf
> # Global Postfix configuration file. This file lists only a subset
> # of all parameters. For the syntax, and for a complete parameter
> # list, see the postconf(5) manual page (command: "man 5 postconf").
> #
> # For common configuration examples, see BASIC_CONFIGURATION_README
> # and STANDARD_CONFIGURATION_README. To find these documents, use
> # the command "postconf html_directory readme_directory", or go to
> # http://www.postfix.org/.
> #
> # For best results, change no more than 2-3 parameters at a time,
> # and test if Postfix still works after every change.
>
> # SOFT BOUNCE
> #
> # The soft_bounce parameter provides a limited safety net for
> # testing.  When soft_bounce is enabled, mail will remain queued that
> # would otherwise bounce. This parameter disables locally-generated
> # bounces, and prevents the SMTP server from rejecting mail permanently
> # (by changing 5xx replies into 4xx replies). However, soft_bounce
> # is no cure for address rewriting mistakes or mail routing mistakes.
> #
> #soft_bounce = no
>
> # LOCAL PATHNAME INFORMATION
> #
> # The queue_directory specifies the location of the Postfix queue.
> # This is also the root directory of Postfix daemons that run chrooted.
> # See the files in examples/chroot-setup for setting up Postfix chroot
> # environments on different UNIX systems.
> #
> queue_directory = /var/spool/postfix
>
> # The command_directory parameter specifies the location of all
> # postXXX commands.
> #
> command_directory = /usr/sbin
>
> # The daemon_directory parameter specifies the location of all Postfix
> # daemon programs (i.e. programs listed in the master.cf file). This
> # directory must be owned by root.
> #
> daemon_directory = /usr/libexec/postfix
>
> # The data_directory parameter specifies the location of Postfix-writable
> # data files (caches, random numbers). This directory must be owned
> # by the mail_owner account (see below).
> #
> data_directory = /var/lib/postfix
>
> # QUEUE AND PROCESS OWNERSHIP
> #
> # The mail_owner parameter specifies the owner of the Postfix queue
> # and of most Postfix daemon processes.  Specify the name of a user
> # account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
> # AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM.  In
> # particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
> # USER.
> #
> mail_owner = postfix
>
> # The default_privs parameter specifies the default rights used by
> # the local delivery agent for delivery to external file or command.
> # These rights are used in the absence of a recipient user context.
> # DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
> #
> #default_privs = nobody
>
> # INTERNET HOST AND DOMAIN NAMES
> #
> # The myhostname parameter specifies the internet hostname of this
> # mail system. The default is to use the fully-qualified domain name
> # from gethostname(). $myhostname is used as a default value for many
> # other configuration parameters.
> #
> #myhostname = host.domain.tld
> myhostname = gabriel.combatangel.com
>
> # The mydomain parameter specifies the local internet domain name.
> # The default is to use $myhostname minus the first component.
> # $mydomain is used as a default value for many other configuration
> # parameters.
> #
> mydomain = combatangel.com
>
> # SENDING MAIL
> #
> # The myorigin parameter specifies the domain that locally-posted
> # mail appears to come from. The default is to append $myhostname,
> # which is fine for small sites.  If you run a domain with multiple
> # machines, you should (1) change this to $mydomain and (2) set up
> # a domain-wide alias database that aliases each user to
> # user@that.users.mailhost.
> #
> # For the sake of consistency between sender and recipient addresses,
> # myorigin also specifies the default domain name that is appended
> # to recipient addresses that have no @domain part.
> #
> #myorigin = $myhostname
> myorigin = $mydomain
>
> # RECEIVING MAIL
>
> # The inet_interfaces parameter specifies the network interface
> # addresses that this mail system receives mail on.  By default,
> # the software claims all active interfaces on the machine. The
> # parameter also controls delivery of mail to user@[ip.address].
> #
> # See also the proxy_interfaces parameter, for network addresses that
> # are forwarded to us via a proxy or network address translator.
> #
> # Note: you need to stop/start Postfix when this parameter changes.
> #
> #inet_interfaces = all
> #inet_interfaces = $myhostname
> #inet_interfaces = $myhostname, localhost
> inet_interfaces = localhost
>
> # Enable IPv4, and IPv6 if supported
> inet_protocols = all
>
> # The proxy_interfaces parameter specifies the network interface
> # addresses that this mail system receives mail on by way of a
> # proxy or network address translation unit. This setting extends
> # the address list specified with the inet_interfaces parameter.
> #
> # You must specify your proxy/NAT addresses when your system is a
> # backup MX host for other domains, otherwise mail delivery loops
> # will happen when the primary MX host is down.
> #
> #proxy_interfaces =
> #proxy_interfaces = 1.2.3.4
>
> # The mydestination parameter specifies the list of domains that this
> # machine considers itself the final destination for.
> #
> # These domains are routed to the delivery agent specified with the
> # local_transport parameter setting. By default, that is the UNIX
> # compatible delivery agent that lookups all recipients in /etc/passwd
> # and /etc/aliases or their equivalent.
> #
> # The default is $myhostname + localhost.$mydomain.  On a mail domain
> # gateway, you should also include $mydomain.
> #
> # Do not specify the names of virtual domains - those domains are
> # specified elsewhere (see VIRTUAL_README).
> #
> # Do not specify the names of domains that this machine is backup MX
> # host for. Specify those names via the relay_domains settings for
> # the SMTP server, or use permit_mx_backup if you are lazy (see
> # STANDARD_CONFIGURATION_README).
> #
> # The local machine is always the final destination for mail addressed
> # to user@[the.net.work.address] of an interface that the mail system
> # receives mail on (see the inet_interfaces parameter).
> #
> # Specify a list of host or domain names, /file/name or type:table
> # patterns, separated by commas and/or whitespace. A /file/name
> # pattern is replaced by its contents; a type:table is matched when
> # a name matches a lookup key (the right-hand side is ignored).
> # Continue long lines by starting the next line with whitespace.
> #
> # See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
> #
> mydestination = $myhostname, localhost
> #mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
> #mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
> #       mail.$mydomain, www.$mydomain, ftp.$mydomain
>
> # REJECTING MAIL FOR UNKNOWN LOCAL USERS
> #
> # The local_recipient_maps parameter specifies optional lookup tables
> # with all names or addresses of users that are local with respect
> # to $mydestination, $inet_interfaces or $proxy_interfaces.
> #
> # If this parameter is defined, then the SMTP server will reject
> # mail for unknown local users. This parameter is defined by default.
> #
> # To turn off local recipient checking in the SMTP server, specify
> # local_recipient_maps = (i.e. empty).
> #
> # The default setting assumes that you use the default Postfix local
> # delivery agent for local delivery. You need to update the
> # local_recipient_maps setting if:
> #
> # - You define $mydestination domain recipients in files other than
> #   /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
> #   For example, you define $mydestination domain recipients in
> #   the $virtual_mailbox_maps files.
> #
> # - You redefine the local delivery agent in master.cf.
> #
> # - You redefine the "local_transport" setting in main.cf.
> #
> # - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
> #   feature of the Postfix local delivery agent (see local(8)).
> #
> # Details are described in the LOCAL_RECIPIENT_README file.
> #
> # Beware: if the Postfix SMTP server runs chrooted, you probably have
> # to access the passwd file via the proxymap service, in order to
> # overcome chroot restrictions. The alternative, having a copy of
> # the system passwd file in the chroot jail is just not practical.
> #
> # The right-hand side of the lookup tables is conveniently ignored.
> # In the left-hand side, specify a bare username, an @domain.tld
> # wild-card, or specify a user@xxxxxxxxxx address.
> #
> #local_recipient_maps = unix:passwd.byname $alias_maps
> #local_recipient_maps = proxy:unix:passwd.byname $alias_maps
> #local_recipient_maps =
>
> # The unknown_local_recipient_reject_code specifies the SMTP server
> # response code when a recipient domain matches $mydestination or
> # ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
> # and the recipient address or address local-part is not found.
> #
> # The default setting is 550 (reject mail) but it is safer to start
> # with 450 (try again later) until you are certain that your
> # local_recipient_maps settings are OK.
> #
> unknown_local_recipient_reject_code = 550
>
> # TRUST AND RELAY CONTROL
>
> # The mynetworks parameter specifies the list of "trusted" SMTP
> # clients that have more privileges than "strangers".
> #
> # In particular, "trusted" SMTP clients are allowed to relay mail
> # through Postfix.  See the smtpd_recipient_restrictions parameter
> # in postconf(5).
> #
> # You can specify the list of "trusted" network addresses by hand
> # or you can let Postfix do it for you (which is the default).
> #
> # By default (mynetworks_style = subnet), Postfix "trusts" SMTP
> # clients in the same IP subnetworks as the local machine.
> # On Linux, this does works correctly only with interfaces specified
> # with the "ifconfig" command.
> #
> # Specify "mynetworks_style = class" when Postfix should "trust" SMTP
> # clients in the same IP class A/B/C networks as the local machine.
> # Don't do this with a dialup site - it would cause Postfix to "trust"
> # your entire provider's network.  Instead, specify an explicit
> # mynetworks list by hand, as described below.
> #
> # Specify "mynetworks_style = host" when Postfix should "trust"
> # only the local machine.
> #
> #mynetworks_style = class
> #mynetworks_style = subnet
> #mynetworks_style = host
>
> # Alternatively, you can specify the mynetworks list by hand, in
> # which case Postfix ignores the mynetworks_style setting.
> #
> # Specify an explicit list of network/netmask patterns, where the
> # mask specifies the number of bits in the network part of a host
> # address.
> #
> # You can also specify the absolute pathname of a pattern file instead
> # of listing the patterns here. Specify type:table for table-based lookups
> # (the value on the table right-hand side is not used).
> #
> mynetworks = 172.21.200.0/24, 127.0.0.0/8
> #mynetworks = $config_directory/mynetworks
> #mynetworks = hash:/etc/postfix/network_table
>
> # The relay_domains parameter restricts what destinations this system will
> # relay mail to.  See the smtpd_recipient_restrictions description in
> # postconf(5) for detailed information.
> #
> # By default, Postfix relays mail
> # - from "trusted" clients (IP address matches $mynetworks) to any
> destination,
> # - from "untrusted" clients to destinations that match $relay_domains or
> #   subdomains thereof, except addresses with sender-specified routing.
> # The default relay_domains value is $mydestination.
> #
> # In addition to the above, the Postfix SMTP server by default accepts mail
> # that Postfix is final destination for:
> # - destinations that match $inet_interfaces or $proxy_interfaces,
> # - destinations that match $mydestination
> # - destinations that match $virtual_alias_domains,
> # - destinations that match $virtual_mailbox_domains.
> # These destinations do not need to be listed in $relay_domains.
> #
> # Specify a list of hosts or domains, /file/name patterns or type:name
> # lookup tables, separated by commas and/or whitespace.  Continue
> # long lines by starting the next line with whitespace. A file name
> # is replaced by its contents; a type:name table is matched when a
> # (parent) domain appears as lookup key.
> #
> # NOTE: Postfix will not automatically forward mail for domains that
> # list this system as their primary or backup MX host. See the
> # permit_mx_backup restriction description in postconf(5).
> #
> #relay_domains = $mydestination
>
> # INTERNET OR INTRANET
>
> # The relayhost parameter specifies the default host to send mail to
> # when no entry is matched in the optional transport(5) table. When
> # no relayhost is given, mail is routed directly to the destination.
> #
> # On an intranet, specify the organizational domain name. If your
> # internal DNS uses no MX records, specify the name of the intranet
> # gateway host instead.
> #
> # In the case of SMTP, specify a domain, host, host:port, [host]:port,
> # [address] or [address]:port; the form [host] turns off MX lookups.
> #
> # If you're connected via UUCP, see also the default_transport parameter.
> #
> #relayhost = $mydomain
> #relayhost = [gateway.my.domain]
> #relayhost = [mailserver.isp.tld]
> #relayhost = uucphost
> #relayhost = [an.ip.add.ress]
>
> # REJECTING UNKNOWN RELAY USERS
> #
> # The relay_recipient_maps parameter specifies optional lookup tables
> # with all addresses in the domains that match $relay_domains.
> #
> # If this parameter is defined, then the SMTP server will reject
> # mail for unknown relay users. This feature is off by default.
> #
> # The right-hand side of the lookup tables is conveniently ignored.
> # In the left-hand side, specify an @domain.tld wild-card, or specify
> # a user@xxxxxxxxxx address.
> #
> #relay_recipient_maps = hash:/etc/postfix/relay_recipients
>
> # INPUT RATE CONTROL
> #
> # The in_flow_delay configuration parameter implements mail input
> # flow control. This feature is turned on by default, although it
> # still needs further development (it's disabled on SCO UNIX due
> # to an SCO bug).
> #
> # A Postfix process will pause for $in_flow_delay seconds before
> # accepting a new message, when the message arrival rate exceeds the
> # message delivery rate. With the default 100 SMTP server process
> # limit, this limits the mail inflow to 100 messages a second more
> # than the number of messages delivered per second.
> #
> # Specify 0 to disable the feature. Valid delays are 0..10.
> #
> #in_flow_delay = 1s
>
> # ADDRESS REWRITING
> #
> # The ADDRESS_REWRITING_README document gives information about
> # address masquerading or other forms of address rewriting including
> # username->Firstname.Lastname mapping.
>
> # ADDRESS REDIRECTION (VIRTUAL DOMAIN)
> #
> # The VIRTUAL_README document gives information about the many forms
> # of domain hosting that Postfix supports.
>
> # "USER HAS MOVED" BOUNCE MESSAGES
> #
> # See the discussion in the ADDRESS_REWRITING_README document.
>
> # TRANSPORT MAP
> #
> # See the discussion in the ADDRESS_REWRITING_README document.
>
> # ALIAS DATABASE
> #
> # The alias_maps parameter specifies the list of alias databases used
> # by the local delivery agent. The default list is system dependent.
> #
> # On systems with NIS, the default is to search the local alias
> # database, then the NIS alias database. See aliases(5) for syntax
> # details.
> #
> # If you change the alias database, run "postalias /etc/aliases" (or
> # wherever your system stores the mail alias file), or simply run
> # "newaliases" to build the necessary DBM or DB file.
> #
> # It will take a minute or so before changes become visible.  Use
> # "postfix reload" to eliminate the delay.
> #
> #alias_maps = dbm:/etc/aliases
> alias_maps = hash:/etc/aliases
> #alias_maps = hash:/etc/aliases, nis:mail.aliases
> #alias_maps = netinfo:/aliases
>
> # The alias_database parameter specifies the alias database(s) that
> # are built with "newaliases" or "sendmail -bi".  This is a separate
> # configuration parameter, because alias_maps (see above) may specify
> # tables that are not necessarily all under control by Postfix.
> #
> #alias_database = dbm:/etc/aliases
> #alias_database = dbm:/etc/mail/aliases
> alias_database = hash:/etc/aliases
> #alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
>
> # ADDRESS EXTENSIONS (e.g., user+foo)
> #
> # The recipient_delimiter parameter specifies the separator between
> # user names and address extensions (user+foo). See canonical(5),
> # local(8), relocated(5) and virtual(5) for the effects this has on
> # aliases, canonical, virtual, relocated and .forward file lookups.
> # Basically, the software tries user+foo and .forward+foo before
> # trying user and .forward.
> #
> #recipient_delimiter = +
>
> # DELIVERY TO MAILBOX
> #
> # The home_mailbox parameter specifies the optional pathname of a
> # mailbox file relative to a user's home directory. The default
> # mailbox file is /var/spool/mail/user or /var/mail/user.  Specify
> # "Maildir/" for qmail-style delivery (the / is required).
> #
> #home_mailbox = Mailbox
> #home_mailbox = Maildir/
>
> # The mail_spool_directory parameter specifies the directory where
> # UNIX-style mailboxes are kept. The default setting depends on the
> # system type.
> #
> #mail_spool_directory = /var/mail
> #mail_spool_directory = /var/spool/mail
>
> # The mailbox_command parameter specifies the optional external
> # command to use instead of mailbox delivery. The command is run as
> # the recipient with proper HOME, SHELL and LOGNAME environment settings.
> # Exception:  delivery for root is done as $default_user.
> #
> # Other environment variables of interest: USER (recipient username),
> # EXTENSION (address extension), DOMAIN (domain part of address),
> # and LOCAL (the address localpart).
> #
> # Unlike other Postfix configuration parameters, the mailbox_command
> # parameter is not subjected to $parameter substitutions. This is to
> # make it easier to specify shell syntax (see example below).
> #
> # Avoid shell meta characters because they will force Postfix to run
> # an expensive shell process. Procmail alone is expensive enough.
> #
> # IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
> # ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
> #
> #mailbox_command = /some/where/procmail
> #mailbox_command = /some/where/procmail -a "$EXTENSION"
>
> # The mailbox_transport specifies the optional transport in master.cf
> # to use after processing aliases and .forward files. This parameter
> # has precedence over the mailbox_command, fallback_transport and
> # luser_relay parameters.
> #
> # Specify a string of the form transport:nexthop, where transport is
> # the name of a mail delivery transport defined in master.cf.  The
> # :nexthop part is optional. For more details see the sample transport
> # configuration file.
> #
> # NOTE: if you use this feature for accounts not in the UNIX password
> # file, then you must update the "local_recipient_maps" setting in
> # the main.cf file, otherwise the SMTP server will reject mail for
> # non-UNIX accounts with "User unknown in local recipient table".
> #
> #mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp
>
> # If using the cyrus-imapd IMAP server deliver local mail to the IMAP
> # server using LMTP (Local Mail Transport Protocol), this is prefered
> # over the older cyrus deliver program by setting the
> # mailbox_transport as below:
> #
> # mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp
> #
> # The efficiency of LMTP delivery for cyrus-imapd can be enhanced via
> # these settings.
> #
> # local_destination_recipient_limit = 300
> # local_destination_concurrency_limit = 5
> #
> # Of course you should adjust these settings as appropriate for the
> # capacity of the hardware you are using. The recipient limit setting
> # can be used to take advantage of the single instance message store
> # capability of Cyrus. The concurrency limit can be used to control
> # how many simultaneous LMTP sessions will be permitted to the Cyrus
> # message store.
> #
> # To use the old cyrus deliver program you have to set:
> #mailbox_transport = cyrus
>
> # The fallback_transport specifies the optional transport in master.cf
> # to use for recipients that are not found in the UNIX passwd database.
> # This parameter has precedence over the luser_relay parameter.
> #
> # Specify a string of the form transport:nexthop, where transport is
> # the name of a mail delivery transport defined in master.cf.  The
> # :nexthop part is optional. For more details see the sample transport
> # configuration file.
> #
> # NOTE: if you use this feature for accounts not in the UNIX password
> # file, then you must update the "local_recipient_maps" setting in
> # the main.cf file, otherwise the SMTP server will reject mail for
> # non-UNIX accounts with "User unknown in local recipient table".
> #
> #fallback_transport = lmtp:unix:/var/lib/imap/socket/lmtp
> #fallback_transport =
>
> # The luser_relay parameter specifies an optional destination address
> # for unknown recipients.  By default, mail for unknown@$mydestination,
> # unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
> # as undeliverable.
> #
> # The following expansions are done on luser_relay: $user (recipient
> # username), $shell (recipient shell), $home (recipient home directory),
> # $recipient (full recipient address), $extension (recipient address
> # extension), $domain (recipient domain), $local (entire recipient
> # localpart), $recipient_delimiter. Specify ${name?value} or
> # ${name:value} to expand value only when $name does (does not) exist.
> #
> # luser_relay works only for the default Postfix local delivery agent.
> #
> # NOTE: if you use this feature for accounts not in the UNIX password
> # file, then you must specify "local_recipient_maps =" (i.e. empty) in
> # the main.cf file, otherwise the SMTP server will reject mail for
> # non-UNIX accounts with "User unknown in local recipient table".
> #
> #luser_relay = $user@xxxxxxxxxx
> #luser_relay = $local@xxxxxxxxxx
> #luser_relay = admin+$local
>
> # JUNK MAIL CONTROLS
> #
> # The controls listed here are only a very small subset. The file
> # SMTPD_ACCESS_README provides an overview.
>
> # The header_checks parameter specifies an optional table with patterns
> # that each logical message header is matched against, including
> # headers that span multiple physical lines.
> #
> # By default, these patterns also apply to MIME headers and to the
> # headers of attached messages. With older Postfix versions, MIME and
> # attached message headers were treated as body text.
> #
> # For details, see "man header_checks".
> #
> #header_checks = regexp:/etc/postfix/header_checks
>
> # FAST ETRN SERVICE
> #
> # Postfix maintains per-destination logfiles with information about
> # deferred mail, so that mail can be flushed quickly with the SMTP
> # "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
> # See the ETRN_README document for a detailed description.
> #
> # The fast_flush_domains parameter controls what destinations are
> # eligible for this service. By default, they are all domains that
> # this server is willing to relay mail to.
> #
> #fast_flush_domains = $relay_domains
>
> # SHOW SOFTWARE VERSION OR NOT
> #
> # The smtpd_banner parameter specifies the text that follows the 220
> # code in the SMTP server's greeting banner. Some people like to see
> # the mail version advertised. By default, Postfix shows no version.
> #
> # You MUST specify $myhostname at the start of the text. That is an
> # RFC requirement. Postfix itself does not care.
> #
> #smtpd_banner = $myhostname ESMTP $mail_name
> #smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
>
> # PARALLEL DELIVERY TO THE SAME DESTINATION
> #
> # How many parallel deliveries to the same user or domain? With local
> # delivery, it does not make sense to do massively parallel delivery
> # to the same user, because mailbox updates must happen sequentially,
> # and expensive pipelines in .forward files can cause disasters when
> # too many are run at the same time. With SMTP deliveries, 10
> # simultaneous connections to the same domain could be sufficient to
> # raise eyebrows.
> #
> # Each message delivery transport has its XXX_destination_concurrency_limit
> # parameter.  The default is $default_destination_concurrency_limit for
> # most delivery transports. For the local delivery agent the default is 2.
>
> #local_destination_concurrency_limit = 2
> #default_destination_concurrency_limit = 20
>
> # DEBUGGING CONTROL
> #
> # The debug_peer_level parameter specifies the increment in verbose
> # logging level when an SMTP client or server host name or address
> # matches a pattern in the debug_peer_list parameter.
> #
> debug_peer_level = 2
>
> # The debug_peer_list parameter specifies an optional list of domain
> # or network patterns, /file/name patterns or type:name tables. When
> # an SMTP client or server host name or address matches a pattern,
> # increase the verbose logging level by the amount specified in the
> # debug_peer_level parameter.
> #
> #debug_peer_list = 127.0.0.1
> #debug_peer_list = some.domain
>
> # The debugger_command specifies the external command that is executed
> # when a Postfix daemon program is run with the -D option.
> #
> # Use "command .. & sleep 5" so that the debugger can attach before
> # the process marches on. If you use an X-based debugger, be sure to
> # set up your XAUTHORITY environment variable before starting Postfix.
> #
> debugger_command =
>          PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
>          ddd $daemon_directory/$process_name $process_id & sleep 5
>
> # If you can't use X, use this to capture the call stack when a
> # daemon crashes. The result is in a file in the configuration
> # directory, and is named after the process name and the process ID.
> #
> # debugger_command =
> #       PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
> #       echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
> #       >$config_directory/$process_name.$process_id.log & sleep 5
> #
> # Another possibility is to run gdb under a detached screen session.
> # To attach to the screen sesssion, su root and run "screen -r
> # <id_string>" where <id_string> uniquely matches one of the detached
> # sessions (from "screen -list").
> #
> # debugger_command =
> #       PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
> #       -dmS $process_name gdb $daemon_directory/$process_name
> #       $process_id & sleep 1
>
> # INSTALL-TIME CONFIGURATION INFORMATION
> #
> # The following parameters are used when installing a new Postfix version.
> #
> # sendmail_path: The full pathname of the Postfix sendmail command.
> # This is the Sendmail-compatible mail posting interface.
> #
> sendmail_path = /usr/sbin/sendmail.postfix
>
> # newaliases_path: The full pathname of the Postfix newaliases command.
> # This is the Sendmail-compatible command to build alias databases.
> #
> newaliases_path = /usr/bin/newaliases.postfix
>
> # mailq_path: The full pathname of the Postfix mailq command.  This
> # is the Sendmail-compatible mail queue listing command.
> #
> mailq_path = /usr/bin/mailq.postfix
>
> # setgid_group: The group for mail submission and queue management
> # commands.  This must be a group name with a numerical group ID that
> # is not shared with other accounts, not even with the Postfix account.
> #
> setgid_group = postdrop
>
> # html_directory: The location of the Postfix HTML documentation.
> #
> html_directory = no
>
> # manpage_directory: The location of the Postfix on-line manual pages.
> #
> manpage_directory = /usr/share/man
>
> # sample_directory: The location of the Postfix sample configuration files.
> # This parameter is obsolete as of Postfix 2.1.
> #
> sample_directory = /usr/share/doc/postfix-2.6.6/samples
>
> # readme_directory: The location of the Postfix README files.
> #
> readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES
>
> #####
>
> # cat master.cf
> #
> # Postfix master process configuration file.  For details on the format
> # of the file, see the master(5) manual page (command: "man 5 master").
> #
> # Do not forget to execute "postfix reload" after editing this file.
> #
> #
> ==========================================================================
> # service type  private unpriv  chroot  wakeup  maxproc command + args
> #               (yes)   (yes)   (yes)   (never) (100)
> #
> ==========================================================================
> smtp      inet  n       -       n       -       -       smtpd
> #submission inet n       -       n       -       -       smtpd
> #  -o smtpd_tls_security_level=encrypt
> #  -o smtpd_sasl_auth_enable=yes
> #  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
> #  -o milter_macro_daemon_name=ORIGINATING
> #smtps     inet  n       -       n       -       -       smtpd
> #  -o smtpd_tls_wrappermode=yes
> #  -o smtpd_sasl_auth_enable=yes
> #  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
> #  -o milter_macro_daemon_name=ORIGINATING
> #628      inet  n       -       n       -       -       qmqpd
> pickup    fifo  n       -       n       60      1       pickup
> cleanup   unix  n       -       n       -       0       cleanup
> qmgr      fifo  n       -       n       300     1       qmgr
> #qmgr     fifo  n       -       n       300     1       oqmgr
> tlsmgr    unix  -       -       n       1000?   1       tlsmgr
> rewrite   unix  -       -       n       -       -       trivial-rewrite
> bounce    unix  -       -       n       -       0       bounce
> defer     unix  -       -       n       -       0       bounce
> trace     unix  -       -       n       -       0       bounce
> verify    unix  -       -       n       -       1       verify
> flush     unix  n       -       n       1000?   0       flush
> proxymap  unix  -       -       n       -       -       proxymap
> proxywrite unix -       -       n       -       1       proxymap
> smtp      unix  -       -       n       -       -       smtp
> # When relaying mail as backup MX, disable fallback_relay to avoid MX loops
> relay     unix  -       -       n       -       -       smtp
>         -o smtp_fallback_relay=
> #       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
> showq     unix  n       -       n       -       -       showq
> error     unix  -       -       n       -       -       error
> retry     unix  -       -       n       -       -       error
> discard   unix  -       -       n       -       -       discard
> local     unix  -       n       n       -       -       local
> virtual   unix  -       n       n       -       -       virtual
> lmtp      unix  -       -       n       -       -       lmtp
> anvil     unix  -       -       n       -       1       anvil
> scache    unix  -       -       n       -       1       scache
> #
> # ====================================================================
> # Interfaces to non-Postfix software. Be sure to examine the manual
> # pages of the non-Postfix software to find out what options it wants.
> #
> # Many of the following services use the Postfix pipe(8) delivery
> # agent.  See the pipe(8) man page for information about ${recipient}
> # and other message envelope options.
> # ====================================================================
> #
> # maildrop. See the Postfix MAILDROP_README file for details.
> # Also specify in main.cf: maildrop_destination_recipient_limit=1
> #
> #maildrop  unix  -       n       n       -       -       pipe
> #  flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}
> #
> # ====================================================================
> #
> # The Cyrus deliver program has changed incompatibly, multiple times.
> #
> #old-cyrus unix  -       n       n       -       -       pipe
> #  flags=R user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -m ${extension}
> ${user}
> #
> # ====================================================================
> #
> # Cyrus 2.1.5 (Amos Gouaux)
> # Also specify in main.cf: cyrus_destination_recipient_limit=1
> #
> #cyrus     unix  -       n       n       -       -       pipe
> #  user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -r ${sender} -m
> ${extension} ${user}
> #
> # ====================================================================
> #
> # See the Postfix UUCP_README file for configuration details.
> #
> #uucp      unix  -       n       n       -       -       pipe
> #  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail
> ($recipient)
> #
> # ====================================================================
> #
> # Other external delivery methods.
> #
> #ifmail    unix  -       n       n       -       -       pipe
> #  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
> #
> #bsmtp     unix  -       n       n       -       -       pipe
> #  flags=Fq. user=bsmtp argv=/usr/local/sbin/bsmtp -f $sender $nexthop
> $recipient
> #
> #scalemail-backend unix -       n       n       -       2       pipe
> #  flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store
> #  ${nexthop} ${user} ${extension}
> #
> #mailman   unix  -       n       n       -       -       pipe
> #  flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
> #  ${nexthop} ${user}
>
> #####
>
> #  cat /etc/sasl2/smtpd.conf
> pwcheck_method: auxprop
> auxprop_plugin: sasldb
> mech_list: PLAIN LOGIN CRAM-MD5 DIGEST-MD5
> smtpd_sasl_path = smtpd
> ------------------------------------------------------------------------------


-- 
Paul Lesniewski
SquirrelMail Team
Please support Open Source Software by donating to SquirrelMail!
http://squirrelmail.org/donate_paul_lesniewski.php

------------------------------------------------------------------------------
-----
squirrelmail-users mailing list
Posting guidelines: http://squirrelmail.org/postingguidelines
List address: squirrelmail-users@xxxxxxxxxxxxxxxxxxxxx
List archives: http://news.gmane.org/gmane.mail.squirrelmail.user
List info (subscribe/unsubscribe/change options): https://lists.sourceforge.net/lists/listinfo/squirrelmail-users



[Index of Archives]     [Video For Linux]     [Yosemite News]     [Yosemite Photos]     [gtk]     [KDE]     [Cyrus SASL]     [Gimp on Windows]     [Steve's Art]     [Webcams]

  Powered by Linux