Thanks Alex,
Let me ask this then ....
I just want squid to redirect any requests (http for instance) to a specific external url so for instance http://mysuidserver:80 to http://externalserver:80 ...
Does that help ....
I'm just sure what is the minimal conf file I would need to achieve this ...
On Mon, Sep 27, 2021 at 9:23 AM Alex Rousskov <rousskov@xxxxxxxxxxxxxxxxxxxxxxx> wrote:
On 9/27/21 8:44 AM, Mike Yates wrote:
> Sorry Alex but if using postman I just post to the internal URL with no
> certificates and everything works fine. All I'm trying to do is post to
> the squid server that will then redirect the post to the external url.
> Its that simple ..
Unfortunately, since I am not familiar with postman, I cannot convert
the pending questions about protocols the server software uses into
questions about your postman configuration. Hopefully, somebody else on
the list can do that for you. We also need to make sure that what you do
in postman matches what your servers are actually doing (as far as
communication protocols are concerned) -- the API server may support
several protocols, and it is possible, at least in theory, that postman
tests use a different set of communication protocols compared to the
actual servers you need to handle.
Without answers to those pending (or similar) questions and without
traffic samples, it is very difficult to guess what is actually going on
in your environment. And without that knowledge, it is not clear how to
configure Squid to do what you want.
I know your environment sounds simple to you, but since you want more
than an "It is simple, just use Squid" answer, we need protocol-level
details to give specific advice.
Alex.
> On Sat, Sep 25, 2021 at 11:55 AM Alex Rousskov wrote:
>
> On 9/25/21 5:23 AM, Mike Yates wrote:
> > There are no certificates to worry about, the api is expecting a token
> > to be included in the payload of the call. So all squid needs to
> do is
> > accept the post from the internal server and pass that post to the
> > external servers url including the payload.
>
> > I hope that helps.
>
> Not yet. Forget about payload for a second. Our problems are still at a
> much higher level: In your examples, you used https://... URLs. Do
> internal servers make HTTPS requests (i.e. HTTP requests over SSL/TLS
> connections)? If yes, then why are you saying that there are no
> certificates to worry about? TLS connections normally involve
> certificate validation!..
>
> Perhaps those internal servers make plain HTTP requests, and you used
> "https://..." URLs in your examples by accident?
>
> BTW, if you do not know the answers to some of the questions, please
> just say so -- there is nothing wrong with that. If you can share a
> small packet capture of a single request/response (in libpcap format),
> that may reduce the number of questions we have to ask.
>
> Alex.
>
>
> > On Fri, Sep 24, 2021, 18:01 Alex Rousskov wrote:
> >
> > On 9/24/21 5:26 PM, Mike Yates wrote:
> > > Ok so let's say the new server outside the dmz has a
> different name. I
> > > need a squid server configuration that will just forward the
> api calls
> > > to an external address. So my internal servers will still point
> > to Fred
> > > ( which is now a squid server and has access to the outside
> world) and
> > > will then forward the requests to the new server I have in
> the cloud.
> > > Long story short I just need a pass through squid server.
> >
> > Will those internal servers trust the certificate you
> configure Squid
> > with? In your example, you used "https://...". That usually
> means the
> > internal servers are going to validate the server certificate.
> Can you
> > make them trust the Squid certificate? Or does the API
> communication
> > have to be signed by a fred.mydomain.com
> <http://fred.mydomain.com> <http://fred.mydomain.com
> <http://fred.mydomain.com>>
> > certificate that you do not
> > control?
> >
> > The other pending question is whether those internal servers are
> > configured to use a proxy (see the previous email on this
> thread) or
> > always talk directly to (what they think is) the API service?
> >
> > Alex.
> >
> >
> > > On Fri, Sep 24, 2021, 17:18 Alex Rousskov wrote:
> > >
> > > On 9/24/21 5:09 PM, Mike Yates wrote:
> > > > I have a bunch of internal machines that do not have
> internet
> > > access and
> > > > any one of them is sending api post requests to another
> > system on prem
> > > > and having no issues ….
> > > >
> > > >
> > > >
> > > > Example would be https://fred.mydomain.com/api/event
> <https://fred.mydomain.com/api/event>
> > <https://fred.mydomain.com/api/event
> <https://fred.mydomain.com/api/event>>
> > > <https://fred.mydomain.com/api/event
> <https://fred.mydomain.com/api/event>
> > <https://fred.mydomain.com/api/event
> <https://fred.mydomain.com/api/event>>>
> > > >
> > > >
> > > >
> > > > Now the problem becomes the fred server is being moved to
> > the cloud so
> > > > the same https://fred.mydomain.com/api/event
> <https://fred.mydomain.com/api/event>
> > <https://fred.mydomain.com/api/event
> <https://fred.mydomain.com/api/event>>
> > > <https://fred.mydomain.com/api/event
> <https://fred.mydomain.com/api/event>
> > <https://fred.mydomain.com/api/event
> <https://fred.mydomain.com/api/event>>> is still valid but none of my
> > > > internal server can see fred and I don’t have access
> to the
> > backend
> > > > servers to change their api calls.
> > >
> > > AFAICT from your summary, "moved to cloud" here means
> that the API
> > > protocol stays the same, the API server domain name
> stays the
> > same, the
> > > API URL path stays the same, but the IP address of that
> domain
> > name will
> > > change. Please clarify if that conclusion is wrong.
> > >
> > > If it is correct, then it is not clear how the change of
> an IP
> > address
> > > would affect those making API requests using the domain
> name,
> > and what
> > > role Squid is playing here.
> > >
> > > Alex.
> > >
> >
>
_______________________________________________ squid-users mailing list squid-users@xxxxxxxxxxxxxxxxxxxxx http://lists.squid-cache.org/listinfo/squid-users
