Hi, and thanks
The ROUTERWIFI is a TpLink TL-WR940N.... i dont see in this router any Nat
option :-(
This is the router table of the SquidBox
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
0.0.0.0 10.1.158.1 0.0.0.0 UG 0 0 0
ens192
10.1.158.0 0.0.0.0 255.255.255.0 U 0 0 0
ens192
169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0
ens160
169.254.0.0 0.0.0.0 255.255.0.0 U 1003 0 0
ens192
192.168.0.0 192.168.1.40 255.255.255.0 UG 0 0 0
ens160
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0
ens160
192.168.2.0 192.168.1.1 255.255.255.0 UG 0 0 0
ens160
192.168.6.0 192.168.1.1 255.255.255.0 UG 0 0 0
ens160
If i enable ipv4 forwarding in SquidBox, the clients of the ROUTERWIFI can
access internet, so i think the router table it's ok.... the clients can go
to internet but just because ipv4 forwarding is enable (the squid service is
not getting anything, i dont see nothing in the access.log...) if i disable
ipv4 forwarding the clients dont go anyway.
This is iptables
[root@squid ~]# iptables -nvL -t nat
Chain PREROUTING (policy ACCEPT 383 packets, 42336 bytes)
pkts bytes target prot opt in out source
destination
0 0 ACCEPT tcp -- * * 192.168.1.20 0.0.0.0/0
tcp dpt:80
0 0 DNAT tcp -- * * 0.0.0.0/0
0.0.0.0/0 tcp dpt:80 to:192.168.1.20:3129
Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source
destination
Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source
destination
Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source
destination
0 0 MASQUERADE all -- * * 0.0.0.0/0
0.0.0.0/0
--
View this message in context: http://squid-web-proxy-cache.1019090.n4.nabble.com/Squid-as-gateway-tp4683022p4683200.html
Sent from the Squid - Users mailing list archive at Nabble.com.
_______________________________________________
squid-users mailing list
squid-users@xxxxxxxxxxxxxxxxxxxxx
http://lists.squid-cache.org/listinfo/squid-users
