Looks the same like. http://squid-web-proxy-cache.1019090.n4.nabble.com/Compiling-squid-3-5-4-with-ecap-enabled-td4671325.html Greetz, Louis > -----Oorspronkelijk bericht----- > Van: squid-users > [mailto:squid-users-bounces@xxxxxxxxxxxxxxxxxxxxx] Namens > Norbert Naveen > Verzonden: dinsdag 13 juni 2017 16:46 > Aan: 'Alex Rousskov'; squid-users@xxxxxxxxxxxxxxxxxxxxx > Onderwerp: Re: Error Compiling squid-3.5.26 > with libecap-1.0.1 on CentOS Linux release 7.3.1611 > > Hello > The Make output can be found at > https://drive.google.com/open?id=0B_dDVNpzSGEKcFlMSlBVZWs5c2c > > > And the output of # grep 'EXT_LIBECAP_.*=' > src/adaptation/ecap/Makefile EXT_LIBECAP_CFLAGS = > /usr/local/lib EXT_LIBECAP_LIBS = /usr/local/lib > > > I did the below to no effect > make -k clean; > ./configure --enable-ecap > make > /tmp/build.log 2>&1 > > Build Log is available at > https://drive.google.com/open?id=0B_dDVNpzSGEKM3JSUHNJLWJlWjA > > Thanks > Naveen > > -----Original Message----- > From: Alex Rousskov [mailto:rousskov@xxxxxxxxxxxxxxxxxxxxxxx] > Sent: Tuesday, June 13, 2017 2:12 AM > To: norbert.naveen@xxxxxxxxx; squid-users@xxxxxxxxxxxxxxxxxxxxx > Subject: Re: Error Compiling squid-3.5.26 with > libecap-1.0.1 on CentOS Linux release 7.3.1611 > > On 06/12/2017 11:29 AM, Norbert Naveen wrote: > > > I have attached Outputs of both Configure and Make And libecap.pc > > contents are as below > > Your ./configure output and libecap.pc contents look good to > me, but there is no sign of the eCAP library (-lecap) being > linked with Squid during "make". If running "make clean; > ./configure ...; make" does not fix this, then please find a > way to post a link to the _entire_ build log. Something along > these lines should be able to capture it: > > $ make -k clean; (./configure ...; make) > /tmp/build.log 2>&1 > > You may want to compress /tmp/build.log. Please post a link > to some public file sharing site here instead of the file > itself. Even compressed, it may be too big to email. > > Also, what does the following command output? > > $ grep 'EXT_LIBECAP_.*=' src/adaptation/ecap/Makefile > > (adjust the Makefile path if necessary if you are not > building Squid its source directory) > > > Cheers, > > Alex. > > _______________________________________________ > squid-users mailing list > squid-users@xxxxxxxxxxxxxxxxxxxxx > http://lists.squid-cache.org/listinfo/squid-users > _______________________________________________ squid-users mailing list squid-users@xxxxxxxxxxxxxxxxxxxxx http://lists.squid-cache.org/listinfo/squid-users
