Hello The Make output can be found at https://drive.google.com/open?id=0B_dDVNpzSGEKcFlMSlBVZWs5c2c Thanks Naveen -----Original Message----- From: Alex Rousskov [mailto:rousskov@xxxxxxxxxxxxxxxxxxxxxxx] Sent: Tuesday, June 13, 2017 2:12 AM To: norbert.naveen@xxxxxxxxx; squid-users@xxxxxxxxxxxxxxxxxxxxx Subject: Re: Error Compiling squid-3.5.26 with libecap-1.0.1 on CentOS Linux release 7.3.1611 On 06/12/2017 11:29 AM, Norbert Naveen wrote: > I have attached Outputs of both Configure and Make And libecap.pc > contents are as below Your ./configure output and libecap.pc contents look good to me, but there is no sign of the eCAP library (-lecap) being linked with Squid during "make". If running "make clean; ./configure ...; make" does not fix this, then please find a way to post a link to the _entire_ build log. Something along these lines should be able to capture it: $ make -k clean; (./configure ...; make) > /tmp/build.log 2>&1 You may want to compress /tmp/build.log. Please post a link to some public file sharing site here instead of the file itself. Even compressed, it may be too big to email. Also, what does the following command output? $ grep 'EXT_LIBECAP_.*=' src/adaptation/ecap/Makefile (adjust the Makefile path if necessary if you are not building Squid its source directory) Cheers, Alex. _______________________________________________ squid-users mailing list squid-users@xxxxxxxxxxxxxxxxxxxxx http://lists.squid-cache.org/listinfo/squid-users
