On 27 February 2017 at 08:41, Test User <tuser6485@xxxxxxxxx> wrote:
On Mon, Feb 27, 2017 at 2:53 AM, Eliezer Croitoru <eliezer@xxxxxxxxxxxx> wrote:
> Let me know if you need some help..
>
> Eliezer
>
> ----
> Eliezer Croitoru
> Linux System Administrator
> Mobile: +972-5-28704261
> Email: eliezer@xxxxxxxxxxxx
>
>
> -----Original Message-----
Thanks for replying Eliezer. Your advice is much appreciated.> From: squid-users [mailto:squid-users-bounces@lists.squid-cache.org ] On Behalf Of Eliezer Croitoru
> Sent: Sunday, February 26, 2017 8:51 PM
> To: 'Test User' <tuser6485@xxxxxxxxx>
> Cc: squid-users@lists.squid-cache.org
> Subject: Re: SSL-Bump: NAT/TPROXY lookup failed to locate original IPs
>
> Hey Michael,
>
> The details you attached explained pretty well the cause for the issues you have described.
> What you will need to do in order to make this setup to work can be done in more then one way.
> For a sysadmin the simplest way is to create a VPN or some kind of a tunnel between the AWS instance to the local router.
> I am almost sure that you can use haproxy to do a local tproxy or interception that will forward the traffic to the remote squid with the PROXY protocol keeping original source and original destination visible to the remote squid.
>
> The choice will depend on both:
> - your skills and will to dig some time about couple subjects
> - The availability of static IP addresses(both local and AWS).
> - The OS on both sides
>
> I believe that the next haproxy settings can be used as a compromise to a tunnel:
> http://ngtech.co.il/paste/1605/
> And some tproxy route and iptables rules ..
> With a squid.conf which will be similar to:
> acl frontend src 100.0.0.1
> proxy_protocol_access allow frontend
> http_port 3127
> http_port 3128 require-proxy-header ... ssl-bump settings
> ##END of example
>
> However I do still believe that the more secure way would be to use some kind of vpn tunnel like OpenVPN between the local router to the remote AWS instance.
>
> All The Bests,
> Eliezer
>
> ----
> Eliezer Croitoru
> Linux System Administrator
> Mobile: +972-5-28704261
> Email: eliezer@xxxxxxxxxxxx
>
>
> -----Original Message-----
> From: Test User [mailto:tuser6485@xxxxxxxxx]
> Sent: Sunday, February 26, 2017 8:38 AM
> To: Eliezer Croitoru <eliezer@xxxxxxxxxxxx>
> Cc: squid-users@lists.squid-cache.org
> Subject: Re: SSL-Bump: NAT/TPROXY lookup failed to locate original IPs
>
> On Sun, Feb 26, 2017 at 10:40 AM, Eliezer Croitoru <eliezer@xxxxxxxxxxxx> wrote:
>> Hey Michael,
>>
>> You will need to clear out couple things for us.
>> First we will need one of the next ouputs or both:
>> iptables-save
>> iptables -L -nv
>>
>> And then clear out where is this proxy sittings and the network structure.
>> It's not clear if the squid box is the router or a machine somewhere on AWS.
>> If you wish to pass traffic from a local router to a one on AWS you will need to create a tunnel like using OpenVPN or a similar solution and to use some routing rules to pass the traffic from the local LAN to AWS without removing the original destination address.
>>
>> When more details on the setup will be available it will be much simpler to understand what is the root for some of the issues you are having.
>>
>> All The Bests,
>> Eliezer
>>
>> ----
>> Eliezer Croitoru
>> Linux System Administrator
>> Mobile: +972-5-28704261
>> Email: eliezer@xxxxxxxxxxxx
>>
>>
>> -----Original Message-----
>> From: squid-users [mailto:squid-users-bounces@lists.squid-cache.org ] On Behalf Of Test User
>> Sent: Friday, February 24, 2017 8:52 AM
>> To: squid-users@lists.squid-cache.org
>> Subject: SSL-Bump: NAT/TPROXY lookup failed to locate original IPs
>>
>> Hi,
>> Sorry I am asking this question again. I am trying to setup HTTPS
>> proxy using ssl-bump. I have followed
>> steps mentioned in:
>> http://wiki.squid-cache.org/ConfigExamples/Intercept/ SslBumpExplicit
>>
>> Following are Squid setup details:
>>
>> Squid Cache: Version 3.5.12
>> Service Name: squid
>> Ubuntu linux
>>
>> configure options: '--build=x86_64-linux-gnu' '--prefix=/usr'
>> '--includedir=${prefix}/include' '--mandir=${prefix}/share/man'
>> '--infodir=${prefix}/share/info' '--sysconfdir=/etc'
>> '--localstatedir=/var' '--libexecdir=${prefix}/lib/squid3'
>> '--srcdir=.' '--disable-maintainer-mode'
>> '--disable-dependency-tracking' '--disable-silent-rules'
>> 'BUILDCXXFLAGS=-g -O2 -fPIE -fstack-protector-strong -Wformat
>> -Werror=format-security -Wl,-Bsymbolic-functions -fPIE -pie
>> -Wl,-z,relro -Wl,-z,now' '--datadir=/usr/share/squid'
>> '--sysconfdir=/etc/squid' '--libexecdir=/usr/lib/squid'
>> '--mandir=/usr/share/man' '--enable-inline' '--disable-arch-native'
>> '--enable-async-io=8' '--enable-storeio=ufs,aufs,diskd,rock'
>> '--enable-removal-policies=lru,heap' '--enable-delay-pools'
>> '--enable-cache-digests' '--enable-icap-client'
>> '--enable-follow-x-forwarded-for'
>> '--enable-auth-basic=DB,fake,getpwnam,LDAP,NCSA,NIS,PAM, POP3,RADIUS,SASL,SMB'
>> '--enable-auth-digest=file,LDAP'
>> '--enable-auth-negotiate=kerberos,wrapper'
>> '--enable-auth-ntlm=fake,smb_lm'
>> '--enable-external-acl-helpers=file_userip,kerberos_ ldap_group,LDAP_group,session, SQL_session,unix_group,wbinfo_ group'
>> '--enable-url-rewrite-helpers=fake' '--enable-eui' '--enable-esi'
>> '--enable-icmp' '--enable-zph-qos' '--enable-ecap' '--with-openssl'
>> '--enable-ssl-crtd' '--disable-translation'
>> '--with-swapdir=/var/spool/squid' '--with-logdir=/var/log/squid'
>> '--with-pidfile=/var/run/squid.pid' '--with-filedescriptors=65536'
>> '--with-large-files' '--with-default-user=proxy'
>> '--enable-build-info=Ubuntu linux' '--enable-linux-netfilter'
>> 'build_alias=x86_64-linux-gnu' 'CFLAGS=-g -O2 -fPIE
>> -fstack-protector-strong -Wformat -Werror=format-security -Wall'
>> 'LDFLAGS=-Wl,-Bsymbolic-functions -fPIE -pie -Wl,-z,relro -Wl,-z,now'
>> 'CPPFLAGS=-Wdate-time -D_FORTIFY_SOURCE=2' 'CXXFLAGS=-g -O2 -fPIE
>> -fstack-protector-strong -Wformat -Werror=format-security'
>>
>>
>> Following is my squid.conf file:
>>
>> acl SSL_ports port 443
>> acl Safe_ports port 80 # http
>> acl Safe_ports port 21 # ftp
>> acl Safe_ports port 443 # https
>> acl Safe_ports port 70 # gopher
>> acl Safe_ports port 210 # wais
>> acl Safe_ports port 1025-65535 # unregistered ports
>> acl Safe_ports port 280 # http-mgmt
>> acl Safe_ports port 488 # gss-http
>> acl Safe_ports port 591 # filemaker
>> acl Safe_ports port 777 # multiling http
>> acl CONNECT method CONNECT
>> acl step1 at_step SslBump1
>> http_access deny !Safe_ports
>> http_access deny CONNECT !SSL_ports
>> http_access allow localhost manager
>> http_access deny manager
>> http_access allow localhost
>> http_access allow all
>> http_port 3128 ssl-bump \
>> cert=/etc/squid/ssl_cert/squidCA.pem \
>> generate-host-certificates=on dynamic_cert_mem_cache_size=4MB
>> https_port 3129 intercept ssl-bump generate-host-certificates=on \
>> dynamic_cert_mem_cache_size=4MB cert=/etc/squid/ssl_cert/ squidCA.pem \
>> dhparams=/etc/squid/ssl_cert/dhparam.pem
>> sslproxy_options NO_SSLv2,NO_SSLv3,SINGLE_DH_USE
>> sslproxy_cipher
>> EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA384: EECDH+ECDSA+SHA256:EECDH+aRSA+ SHA384:EECDH+aRSA+SHA256: EECDH+aRSA+RC4:EECDH:EDH+aRSA: !RC4:!aNULL:!eNULL:!LOW:!3DES: !MD5:!EXP:!PSK:!SRP:!DSS
>> sslcrtd_program /usr/lib/squid/ssl_crtd -s /var/spool/squid3_ssldb -M 4MB
>> debug_options ALL,1 3,5 4,5 11,5 17,5 23,5 46,5 78,5 rotate=1
>> coredump_dir /var/spool/squid
>> refresh_pattern ^ftp: 1440 20% 10080
>> refresh_pattern ^gopher: 1440 0% 1440
>> refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
>> refresh_pattern (Release|Packages(.gz)*)$ 0 20% 2880
>> refresh_pattern . 0 20% 4320
>>
>>
>> I get no errors while starting Squid. Following are the logs when Squid starts:
>>
>> 2017/02/23 09:59:53 kid1| Set Current Directory to /var/spool/squid
>> 2017/02/23 09:59:53 kid1| Starting Squid Cache version 3.5.12 for
>> x86_64-pc-linux-gnu...
>> 2017/02/23 09:59:53 kid1| Service Name: squid
>> 2017/02/23 09:59:53 kid1| Process ID 26236
>> 2017/02/23 09:59:53 kid1| Process Roles: worker
>> 2017/02/23 09:59:53 kid1| With 65535 file descriptors available
>> 2017/02/23 09:59:53 kid1| Initializing IP Cache...
>> 2017/02/23 09:59:53.756 kid1| 78,2| dns_internal.cc(1525) dnsInit:
>> idnsInit: attempt open DNS socket to: [::]
>> 2017/02/23 09:59:53.756 kid1| 78,2| dns_internal.cc(1534) dnsInit:
>> idnsInit: attempt open DNS socket to: 0.0.0.0
>> 2017/02/23 09:59:53.756 kid1| DNS Socket created at [::], FD 6
>> 2017/02/23 09:59:53.756 kid1| DNS Socket created at 0.0.0.0, FD 7
>> 2017/02/23 09:59:53.756 kid1| Adding nameserver 172.31.0.2 from /etc/resolv.conf
>> 2017/02/23 09:59:53.756 kid1| 78,3| dns_internal.cc(321)
>> idnsAddNameserver: idnsAddNameserver: Added nameserver #0
>> (172.31.0.2:53)
>> 2017/02/23 09:59:53.756 kid1| Adding domain
>> ap-south-1.compute.internal from /etc/resolv.conf
>> 2017/02/23 09:59:53.756 kid1| 78,3| dns_internal.cc(350)
>> idnsAddPathComponent: idnsAddPathComponent: Added domain #0:
>> ap-south-1.compute.internal
>> 2017/02/23 09:59:53.756 kid1| helperOpenServers: Starting 5/32
>> 'ssl_crtd' processes
>> 2017/02/23 09:59:53.775 kid1| 46,2| Format.cc(64) parse: got
>> definition '%>a/%>A %un %>rm myip=%la myport=%lp'
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
>> possible Misc token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
>> possible 2C token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(389) parse: scan for
>> possible 1C token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
>> possible Misc token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
>> possible 2C token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(389) parse: scan for
>> possible 1C token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
>> possible Misc token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
>> possible 2C token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
>> possible Misc token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
>> possible 2C token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
>> possible Misc token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
>> possible 2C token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
>> possible Misc token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
>> possible 2C token
>> 2017/02/23 09:59:53.775 kid1| 46,2| Format.cc(64) parse: got
>> definition '%>a/%>A %un %>rm myip=%la myport=%lp'
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
>> possible Misc token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
>> possible 2C token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(389) parse: scan for
>> possible 1C token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
>> possible Misc token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
>> possible 2C token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(389) parse: scan for
>> possible 1C token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
>> possible Misc token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
>> possible 2C token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
>> possible Misc token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
>> possible 2C token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
>> possible Misc token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
>> possible 2C token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
>> possible Misc token
>> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
>> possible 2C token
>> 2017/02/23 09:59:53.775 kid1| Logfile: opening log
>> daemon:/var/log/squid/access.log
>> 2017/02/23 09:59:53.775 kid1| Logfile Daemon: opening log
>> /var/log/squid/access.log
>> 2017/02/23 09:59:53.779 kid1| 23,5| url.cc(43) urlInitialize:
>> urlInitialize: Initializing...
>> 2017/02/23 09:59:53.779 kid1| Local cache digest enabled;
>> rebuild/rewrite every 3600/3600 sec
>> 2017/02/23 09:59:53.779 kid1| Store logging disabled
>> 2017/02/23 09:59:53.779 kid1| Swap maxSize 0 + 262144 KB, estimated
>> 20164 objects
>> 2017/02/23 09:59:53.779 kid1| Target number of buckets: 1008
>> 2017/02/23 09:59:53.779 kid1| Using 8192 Store buckets
>> 2017/02/23 09:59:53.779 kid1| Max Mem size: 262144 KB
>> 2017/02/23 09:59:53.779 kid1| Max Swap size: 0 KB
>> 2017/02/23 09:59:53.779 kid1| Using Least Load store dir selection
>> 2017/02/23 09:59:53.779 kid1| Set Current Directory to /var/spool/squid
>> 2017/02/23 09:59:53.785 kid1| 23,3| url.cc(357) urlParse: urlParse:
>> Split URL 'http://ip-172-31-25-235:3128/squid-internal-static/icons/ 'silk/image.png
>> into proto='http', host='ip-172-31-25-235', port='3128',
>> path='/squid-internal-static/icons/silk/image.png'
>> 2017/02/23 09:59:53.785 kid1| 23,3| url.cc(357) urlParse: urlParse:
>> Split URL 'http://ip-172-31-25-235:3128/squid-internal-static/icons/ 'silk/page_white_text.png
>> into proto='http', host='ip-172-31-25-235', port='3128',
>> path='/squid-internal-static/icons/silk/page_white_text. png'
>>
>> ****several urlParse logs like above. Removing them to shorten the
>> email. Further logs below...****
>>
>> 2017/02/23 09:59:53.815 kid1| Finished loading MIME types and icons.
>> 2017/02/23 09:59:53.815 kid1| HTCP Disabled.
>> 2017/02/23 09:59:53.815 kid1| Pinger socket opened on FD 25
>> 2017/02/23 09:59:53.815 kid1| Squid plugin modules loaded: 0
>> 2017/02/23 09:59:53.815 kid1| Adaptation support is off.
>> 2017/02/23 09:59:53.815 kid1| Accepting SSL bumped HTTP Socket
>> connections at local=[::]:3128 remote=[::] FD 22 flags=9
>> 2017/02/23 09:59:53.815 kid1| Accepting NAT intercepted SSL bumped
>> HTTPS Socket connections at local=[::]:3129 remote=[::] FD 23 flags=41
>> 2017/02/23 09:59:53| pinger: Initialising ICMP pinger ...
>> 2017/02/23 09:59:53| pinger: ICMP socket opened.
>> 2017/02/23 09:59:53| pinger: ICMPv6 socket opened
>> 2017/02/23 09:59:54 kid1| storeLateRelease: released 0 objects
>>
>>
>>
>> I tested this setup by providing proxy details to Firefox. Firefox was
>> able to show HTTP websites but when I tried to open an HTTPS website I
>> got following error:
>>
>> 2017/02/23 11:00:50 kid1| ERROR: NF getsockopt(ORIGINAL_DST) failed on
>> local=172.31.25.235:3129 remote=182.72.78.122:50655 FD 7 flags=33:
>> (92) Protocol not available
>> 2017/02/23 11:00:50 kid1| ERROR: NAT/TPROXY lookup failed to locate
>> original IPs on local=172.31.25.235:3129 remote=182.72.78.122:50655 FD
>> 7 flags=33
>> 2017/02/23 11:00:50 kid1| ERROR: NF getsockopt(ORIGINAL_DST) failed on
>> local=172.31.25.235:3129 remote=182.72.78.122:50656 FD 7 flags=33:
>> (92) Protocol not available
>> 2017/02/23 11:00:50 kid1| ERROR: NAT/TPROXY lookup failed to locate
>> original IPs on local=172.31.25.235:3129 remote=182.72.78.122:50656 FD
>> 7 flags=33
>> 2017/02/23 11:00:50 kid1| ERROR: NF getsockopt(ORIGINAL_DST) failed on
>> local=172.31.25.235:3129 remote=182.72.78.122:50657 FD 7 flags=33:
>> (92) Protocol not available
>> 2017/02/23 11:00:50 kid1| ERROR: NAT/TPROXY lookup failed to locate
>> original IPs on local=172.31.25.235:3129 remote=182.72.78.122:50657 FD
>> 7 flags=33
>>
>> I googled this error and found this mail thread which had similar problems:
>> http://squid-web-proxy-cache.1019090.n4.nabble.com/NAT- TPROXY-lookup-failed-to- locate-original-IPs-td4675464. html
>>
>> I found this link from the above thread. I modified the steps for
>> HTTPS from the below link:
>> http://wiki.squid-cache.org/ConfigExamples/Intercept/ LinuxDnat
>>
>> Now my sysctl.conf is:
>>
>> net.ipv4.conf.all.rp_filter=0
>> net.ipv4.ip_forward = 1
>> net.ipv4.conf.default.rp_filter = 0
>> net.ipv4.conf.default.accept_source_route = 0
>>
>> My iptables -t nat -L result:
>>
>> Chain PREROUTING (policy ACCEPT)
>> target prot opt source destination
>> ACCEPT tcp -- ec2-35-154-101-8.ap-south-1.compute.amazonaws.com
>> anywhere tcp dpt:https
>> DNAT tcp -- anywhere anywhere tcp
>> dpt:https to:35.154.101.8:3129
>>
>> Chain INPUT (policy ACCEPT)
>> target prot opt source destination
>>
>> Chain OUTPUT (policy ACCEPT)
>> target prot opt source destination
>>
>> Chain POSTROUTING (policy ACCEPT)
>> target prot opt source destination
>> MASQUERADE all -- anywhere anywhere
>>
>>
>> Once this was done, I tried to hit HTTPS website from Firefox and now
>> I get connection timeout error. Nothing shows in syslog, access.log or
>> cache.log. Could you please help me resolve this.
>>
>> Thanks,
>> Michael
>> _______________________________________________
>> squid-users mailing list
>> squid-users@lists.squid-cache.org
>> http://lists.squid-cache.org/listinfo/squid-users
>>
>
>
> Thanks for replying Eliezer. Following are the outputs you asked:
>
> 1. iptables-save:
>
> # Generated by iptables-save v1.6.0 on Sun Feb 26 06:28:46 2017
> *filter
> :INPUT ACCEPT [171:12090]
> :FORWARD ACCEPT [0:0]
> :OUTPUT ACCEPT [106:15187]
> COMMIT
> # Completed on Sun Feb 26 06:28:46 2017
> # Generated by iptables-save v1.6.0 on Sun Feb 26 06:28:46 2017
> *mangle
> :PREROUTING ACCEPT [89003:74850371]
> :INPUT ACCEPT [88973:74849159]
> :FORWARD ACCEPT [30:1212]
> :OUTPUT ACCEPT [76710:51478183]
> :POSTROUTING ACCEPT [76740:51479395]
> -A PREROUTING -p tcp -m tcp --dport 3129 -j DROP
> COMMIT
> # Completed on Sun Feb 26 06:28:46 2017
> # Generated by iptables-save v1.6.0 on Sun Feb 26 06:28:46 2017
> *nat
> :PREROUTING ACCEPT [7766:436942]
> :INPUT ACCEPT [7766:436942]
> :OUTPUT ACCEPT [952:102330]
> :POSTROUTING ACCEPT [0:0]
> -A PREROUTING -s 35.154.101.8/32 -p tcp -m tcp --dport 443 -j ACCEPT
> -A PREROUTING -p tcp -m tcp --dport 443 -j DNAT --to-destination
> 35.154.101.8:3129
> -A POSTROUTING -j MASQUERADE
> COMMIT
> # Completed on Sun Feb 26 06:28:46 2017
>
> 2. Also pasting sudo iptables -L -nv:
>
> Chain INPUT (policy ACCEPT 216 packets, 16058 bytes)
> pkts bytes target prot opt in out source
> destination
>
> Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
> pkts bytes target prot opt in out source
> destination
>
> Chain OUTPUT (policy ACCEPT 161 packets, 24629 bytes)
> pkts bytes target prot opt in out source destination
>
>
>
>> And then clear out where is this proxy sittings and the network structure.
>> It's not clear if the squid box is the router or a machine somewhere on AWS.
>
> [Michael] This proxy is installed on an AWS instance.
>
>> If you wish to pass traffic from a local router to a one on AWS you will need to create a tunnel like using OpenVPN or a similar solution and to use some routing rules to pass the traffic from the local LAN to AWS without removing the original destination address.
>>
>
> [Michael] Does this mean, to make ssl-bump work, I will have to setup
> a VPN server and configure the VPN clients to use this proxy via VPN
> server?
>
>
> Thanks,
> Michael.
>
> _______________________________________________
> squid-users mailing list
> squid-users@lists.squid-cache.org
> http://lists.squid-cache.org/listinfo/squid-users
>
> The details you attached explained pretty well the cause for the issues you have described.
> What you will need to do in order to make this setup to work can be done in more then one way.
> For a sysadmin the simplest way is to create a VPN or some kind of a tunnel between the AWS instance to the local router.
> I am almost sure that you can use haproxy to do a local tproxy or interception that will forward the traffic to the remote squid with the PROXY protocol keeping original source and original destination visible to the remote squid.
>
> The choice will depend on both:
> - your skills and will to dig some time about couple subjects
> - The availability of static IP addresses(both local and AWS).
> - The OS on both sides
[Michael] Actually, my original setup involves a VPN server. I wasn't
using it because I wanted to setup ssl-bump with simplest possible
settings. My actual setup involves:
1. strongSwan IPSec VPN server
2. Squid Proxy server
3. Clients will be IPSec VPN clients. I can specify the IP address and
port of HTTPS Proxy server in IPSec VPN client itself.
In the above setup described, will I have to do something extra to
make ssl-bump work?
Thanks,
Michael.
Best regards,
Odhiambo WASHINGTON,
Nairobi,KE
+254 7 3200 0004/+254 7 2274 3223
"Oh, the cruft."
Odhiambo WASHINGTON,
Nairobi,KE
+254 7 3200 0004/+254 7 2274 3223
"Oh, the cruft."
_______________________________________________ squid-users mailing list squid-users@xxxxxxxxxxxxxxxxxxxxx http://lists.squid-cache.org/listinfo/squid-users
