Re: Setup wccp2 with squid3 and cisco switch 4507

[Yuri Voinov <yvoinov@xxxxxxxxx>]

May be, this could help you:

http://wiki.squid-cache.org/ConfigExamples/Intercept/CiscoIOSv15Wccp2

14.12.2016 21:46, André Bolinhas пишет:

Hi,

I need to setup wccp2 between my Squid3 box and my cisco switch 4507

Since my 4507 don't support GRE on forward methoding I need to configure the the wccp with L2.

 

My squid.conf

http_port 3129 intercept

wccp2_router $IP-OF-ROUTER

wccp2_forwarding_method l2

wccp2_return_method l2

 

My question is, in GRE method I need to create a GRE tunnel like this

modprobe ip_gre

ip tunnel add wccp0 mode gre remote $ASA-EXT-IP local $SQUID-IP dev eth0

 

ifconfig wccp0 $SQUID-IP netmask 255.255.255.255 up

echo 0 >/proc/sys/net/ipv4/conf/wccp0/rp_filter

echo 0 >/proc/sys/net/ipv4/conf/eth0/rp_filter

echo 1 >/proc/sys/net/ipv4/ip_forward

iptables -t nat -A PREROUTING -i wccp0 -p tcp --dport 80 -j REDIRECT --to-port 3129

iptables -t nat -A POSTROUTING -j MASQUERADE

 

In L2 method the configuration is the same (tunnel, sysctl, iptables..) ? if not can you help me to configure it (tunnel, sysctl, iptables..).

 

Also in switch what's ACL I need to create?

 

Best regard

_______________________________________________
squid-users mailing list
squid-users@xxxxxxxxxxxxxxxxxxxxx
http://lists.squid-cache.org/listinfo/squid-users

--
Cats - delicious. You just do not know how to cook them.

Attachment: 0x613DEC46.asc
Description: application/pgp-keys

Attachment: signature.asc
Description: OpenPGP digital signature

_______________________________________________
squid-users mailing list
squid-users@xxxxxxxxxxxxxxxxxxxxx
http://lists.squid-cache.org/listinfo/squid-users