On 10/15/2016 05:16 PM, Jester Purtteman wrote: > The packet capture idea is a good one too, I'll do that as well. > Similar issue (sifting a small amount of info out of an ocean of data) > but I think valuable. With a packet capture and a matching access.log, it is easy to find the offending connections without Squid-specific knowledge because you can ask Wireshark or a similar tool to locate the packets that match the logged IPs and ports (the ones on the error:... lines in access.log). After that, you just follow the TCP stream you found and look at its packet payload to identify the protocol/intent... With cache.log, the procedure is similar but there is no nice interface to "follow the identified transaction". There are some very useful scripts that can follow descriptors and internal Squid "jobs", but they do require some low-level Squid-specific knowledge and experience to operate correctly (unfortunately). Besides, you may not see the payload, especially if Squid does not try to parse it. Alex. _______________________________________________ squid-users mailing list squid-users@xxxxxxxxxxxxxxxxxxxxx http://lists.squid-cache.org/listinfo/squid-users
