Hi Alex
thank you for your answer.
Obviously, I intended to write
squid.
I have resolve my problem changing the workers configuration
from:
workers 4
http_access allow localhost
http_port localhost:
400${process_number}
cache_dir aufs /var/spool/squid 16384 32 512
cache_dir rock /var/spool/squid/rock 16384 max-size=32768
cache_dir
aufs /var/spool/squid/squid-cache0${process_number} 16384 16 512 min-
size=32769
to
workers 4
http_access allow localhost
http_port
localhost:400${process_number}
cache_dir rock /var/spool/squid/rock
16384 max-size=32768
if ${process_number} = 1
cache_dir aufs
/var/spool/squid/squid-cache01 16384 16 512 min-size=32769
endif
if
${process_number} = 2
cache_dir aufs /var/spool/squid/squid-
cache02 16384 16 512 min-size=32769
endif
if ${process_number} = 3
cache_dir aufs /var/spool/squid/squid-cache03 16384 16 512 min-
size=32769
endif
if ${process_number} = 4
cache_dir aufs
/var/spool/squid/squid-cache04 16384 16 512 min-size=32769
endif
Thank you
----Messaggio originale----
Da: rousskov@measurement-factory.
com
Data: 26-set-2016 16.12
A: <squid-users@xxxxxxxxxxxxxxxxxxxxx>
Cc:
"amaury@xxxxxx"<amaury@xxxxxx>
Ogg: Re: problem reload
configuration with workers
On 09/26/2016 08:02 AM, amaury@xxxxxx
wrote:
> I'm using squid 3.5.21-20160908-r14081 and for the first time
I'm
> using workers configuration. I have a problem:
> when I reload
configuration (via init script)
> suid -k reconfigure -f
/et/squid/squid.conf
I assume that by "suid" you meant "squid". If
yes, then the above
command is a correct way to reconfigure Squid,
including SMP Squid.
> the system kill squid-coord and squid-disk
Does "the system" do more than run "squid -k reconfigure ..."?
* If
not, then "the system" does not kill squid-coord and squid-disk
(something else does).
* If yes, then you should fix your system
script. Perhaps it thinks that
Squid died and tries to kill/restart it?
> So I have to remove pd
> file and lock files and restart squid.
>
Please, do it exist a solution
> to reload with restart squid?
Reconfiguration should work "as is". If it does not work, file a bug
report with details such as your system command(s) and resulting
cache.
log and syslog output.
> I tried also using something like:
>
>
pid_filename /var/run/squid/squid-{proccess_number}.
Please do not do
that. SMP Squid is designed to work with a single
configuration file
without SMP macros.
Thank you,
Alex.
_______________________________________________
squid-users mailing list
squid-users@xxxxxxxxxxxxxxxxxxxxx
http://lists.squid-cache.org/listinfo/squid-users
