Hello VB, Hopefully this will be helpful to recompile Squid on Raspberry PI - http://docs.diladele.com/administrator_guide_4_6/install/rpi/squid.html Scripts to do that are https://github.com/ra-at-diladele-com/qlproxy_external/tree/master/src/va/scripts.debian8 Best regards, Rafael Akchurin Diladele B.V. http://www.quintolabs.com http://www.diladele.com -- Please take a look at Web Safety - our ICAP based web filter server for Squid proxy. -----Original Message----- From: squid-users [mailto:squid-users-bounces@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of VB Sent: Saturday, September 17, 2016 8:39 AM To: squid-users@xxxxxxxxxxxxxxxxxxxxx Subject: Re: SQUID 3.4.8 on RPi 3 Hi Yuri thx a lot for your links.. following the first one, what I did: 1. Create and sign the .pem certificate 2. Update my squid.conf with: https_port 3130 ssl-bump \ cert=/etc/squid/ssl/myCA.pem \ generate-host-certificates=on dynamic_cert_mem_cache_size=4MB acl step1 at_step SslBump1 ssl_bump peek step1 ssl_bump bump all but when I check the configuration (squid3 -k parse), I get: Processing: https_port 3130 ssl-bump cert=/etc/squid/ssl/myCA.pem generate-host-certificates=on dynamic_cert_mem_cache_size=4MB ERROR: 'https_port' requires --enable-ssl Processing: acl step1 at_step SslBump1 FATAL: Invalid ACL type 'at_step' FATAL: Bungled /etc/squid3/squid.conf line 130: acl step1 at_step SslBump1 how can I overcome these errors on squid 3.4.8? Is my version of squid ssl-enabled? and if not.. how can I re-configure it? thx Vincenzo -- View this message in context: http://squid-web-proxy-cache.1019090.n4.nabble.com/SQUID-3-4-8-on-RPi-3-tp4679556p4679562.html Sent from the Squid - Users mailing list archive at Nabble.com. _______________________________________________ squid-users mailing list squid-users@xxxxxxxxxxxxxxxxxxxxx http://lists.squid-cache.org/listinfo/squid-users _______________________________________________ squid-users mailing list squid-users@xxxxxxxxxxxxxxxxxxxxx http://lists.squid-cache.org/listinfo/squid-users
