On 23/05/2016 4:41 p.m., Mark Davies wrote: > I know this comes up repeatedly but I'm now hitting this and can't see why. > > I have a traditional squid setup that works fine for clients that > explicitly point at it but I also want to allow transparent access for some > destinations for only port 80. So I have wccp2 set up between a cisco > switch and the squid to direct the traffic to the box (and that seems to be > happening fine). I have the below pf.conf (This is on NetBSD using PF) on > the box to direct the traffic to the intercept port: > > > ext_if="wm0" > int_if="bnx0" > > set skip on lo0 > > rdr pass on $int_if inet proto tcp from 130.195.0.0/20 to any port 80 -> > 127.0.0.1 port 8081 What prevents Squids outgoing traffic (to port 80) from being diverted back into Squid again? Amos _______________________________________________ squid-users mailing list squid-users@xxxxxxxxxxxxxxxxxxxxx http://lists.squid-cache.org/listinfo/squid-users
