|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 To immediately solve every problem just enough to build squid with all dependencies from sources. :) It takes approx 1 hour. :) 25.01.16 0:18, startrekfan пишет: > I tried your script in a VM aaaaand.....it fails because of the missing > libcap3 dependencie. > > I tried to run the script serveral times. > > Here are the interesting outputs of the last run: > > > 1. root@debian123:/home/ich/tmp# squid3 -v > 2. Squid Cache: Version 3.4.8 > > > > 1. root@debian123:/home/ich/tmp# dir /var/www/html/mydebs/ > 2. c-icap_0.4.2-2_amd64.deb libicapapi4_0.4.2-2_amd64.deb > 3. libc-icap-mod-clamav_0.4.2-1_all.deb > libicapapi4-dbg_0.4.2-2_amd64.deb > 4. libc-icap-mod-contentfiltering_0.4.2-1_amd64.deb > libicapapi-dev_0.4.2-2_amd64.deb > 5. libc-icap-mod-urlcheck_0.4.2-1_amd64.deb Packages.gz > 6. libc-icap-mod-virus-scan_0.4.2-1_amd64.deb > > > > 1. dpkg-buildpackage: Quellpaket squid3 > 2. dpkg-buildpackage: Quellversion 3.5.12-1 > 3. dpkg-buildpackage: Quelldistribution unstable > 4. dpkg-buildpackage: Quellen geändert durch Luigi Gangitano < > luigi@xxxxxxxxxx> > 5. dpkg-buildpackage: Host-Architektur amd64 > 6. dpkg-source --before-build squid3-3.5.12 > 7. dpkg-checkbuilddeps: Nicht erfüllte Bauabhängigkeiten: libecap3-dev > (>= 1.0.1-2) libgnutls28-dev > 8. dpkg-buildpackage: Warnung: Bauabhängigkeiten/-konflikte nicht > erfüllt; Abbruch > 9. dpkg-buildpackage: Warnung: (Verwenden Sie -d, um sich darüber > hinwegzusetzen.) > 10. Build-Befehl »cd squid3-3.5.12 && dpkg-buildpackage -b -uc« > fehlgeschlagen. > 11. E: Kindprozess fehlgeschlagen > > > I also tried to change "libecap" to "libecap3" within the script and I also > tried to add "libecap-dev"/"libecap3-dev" to the script: Without any > result. > Of course I used apt-get upgrade after the script finished...no upgrade > packages available. If you still don`t believe me I can send you > screenshots. > > I'm sure that it's possible to get it to work this way, if you spend enough > time. > > But I still think that this isn't a good way to do it. When I get it to > work after hours of trying and squid releases a new version with > new dependencies I have to do the work again(and it's not capable to > auto/apt upgrade). On the other hand this way is prone to failure(unstable > software, custom installation path, ...) > > At the end this should be a productive system not a tinker pc. It should > run without doing a lot of tricks that can fail at any time. > > *So the only _good_ solution is a modification of the license so that the > debian team can build squid with ssl support. This will solve every problem > immediately.* > > > > > L.P.H. van Belle <belle@xxxxxxxxx> schrieb am Sa., 23. Jan. 2016 um > 09:10 Uhr: > >> >> >> i wrote you.. i tested it... >> yes it works.... >> i have installed 2 x squid 3.5.10 from sid. and updated these 3.5.12. >> >> both servers are my production proxys... >> >> Your not reading or trying. >> >> libecap3 is replaced by libecap4 !!!! >> >> go try this or go compile yourself... >> >> im done.. >> >> >> >> Op 22 jan. 2016 om 19:15 heeft startrekfan <startrekfan75@xxxxxxxxxx> het >> volgende geschreven: >> >> I'm not sure that this script will work. The script isn't doing much more >> then adding an unstable entry to the sources list and trying to >> *_install_* the dependencies (Yes, apt-get build-deb squid will install >> the depencies directly on my debian jessie system) >> >> As I described before: This will not work, because of the missing libecap3 >> that could not be installed on a stable debian without installing a bunch >> of other dependencies. >> >> >> L.P.H. van Belle <belle@xxxxxxxxx> schrieb am Fr., 22. Jan. 2016 um >> 16:46 Uhr: >> >>> No, this is NOT a problem at all. >>> You need 4 ! files and no other sid depends, just debian Jessie. >>> Its a quick write, but should be error free, tested until the squid >>> compile. >>> >>> I use a separated VM for this and all my created debs are available >>> throuh webaccess, like normal, below is based on "local install" if you >>> want to have is network available, look het het >>> apt/sources.list.d/lcoalrepo.list, >>> change to needed hostname for your webserver etc.. not explained here.. >>> but should be easy to do. >>> >>> Create a file, add content below ( sed CODE ), >>> chmod +x and run it. (as root) >>> >>> In the end you have a compiled squid 3.5.12, ready to instal with ssl >>> enabled. Which is just a apt-get install squid then. >>> And !! all squid3 is now changed to squid !! >>> >>> Enjoy, and have a nice weekend, >>> >>> Greetz, >>> >>> Louis >>> >>> >>> ### CODE, run as root, can be beter, but a quicky for you. >>> #!/bin/bash >>> >>> SETPATH=`pwd` >>> if [ ! -e /etc/apt/sources.list.d/sid.list ]; then >>> # adding sid repo >>> cat << EOF >> /etc/apt/sources.list.d/sid.list >>> # >>> #deb http://ftp.nl.debian.org/debian/ sid main non-free contrib >>> deb-src http://ftp.nl.debian.org/debian/ sid main non-free contrib >>> EOF >>> fi >>> >>> if [ ! -e /etc/apt/sources.list.d/localrepo.list ]; then >>> # adding local repo ( webserver based ) >>> cat << EOF >> /etc/apt/sources.list.d/localrepo.list >>> # >>> # change if you done have a webserver. >>> #file:/var/www/mydebs ./ >>> deb http://localhost/mydebs/ ./ >>> EOF >>> >>> fi >>> >>> if [ ! -e /var/www/mydebs ]; then >>> # get dependes, sources and build sources, setup local apt. >>> mkdir -p /var/www/mydebs >>> apt-get install dpkg-dev -y >>> fi >>> >>> for x in c-icap c-icap-modules libecap squid ; do >>> apt-get build-dep $x >>> apt-get source $x >>> if [ $x = squid ]; then >>> sed -i 's/--with-default-user=proxy/--with-default-user=proxy >>> \\/g' squid3-3.5.12/debian/rules >>> sed -i '/with-default-user=proxy/a \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ >>> \ --enable-ssl \\' squid3-3.5.12/debian/rules >>> sed -i '/enable-ssl/a \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ >>> --with-open-ssl=/etc/ssl/openssl.cnf \\' squid3-3.5.12/debian/rules >>> sed -i '/with-open-ssl/a \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ >>> --enable-linux-netfilter' squid3-3.5.12/debian/rules >>> fi >>> apt-get source $x -b >>> >>> cp *.deb /var/www/mydebs >>> cd /var/www/mydebs >>> dpkg-scanpackages . /dev/null | gzip -9c > Packages.gz >>> cd $SETPATH >>> echo "Running apt-get update, please wait." >>> apt-get update 2> /dev/null >>> sleep 1 >>> done >>> >>> ## CODE ENDS,. >>> >>> >>> > > > > _______________________________________________ > squid-users mailing list > squid-users@xxxxxxxxxxxxxxxxxxxxx > http://lists.squid-cache.org/listinfo/squid-users -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQEcBAEBCAAGBQJWpRdKAAoJENNXIZxhPexGiy0H/2a+VaciND4LAYAecfPqWBfG 7k2hAgPbQsYYgAJ0ZZUXvrDBYjbuP+i8H2BhIkhcN0rU92spI3wiDbdhWvKMcGg/ X9C3/v9+VpDuz7nC01vb6WF1VLSHqxZiqPnsgKlIRu9Fu4oJjgcDdZI9PvCa2ywn yPCK3EdpoQJs8WtIq5IT3fpZOyNPiDY1SA4Oq4/xOomrifnzmGmE2j5vqYc9aYmI Yh56NJfcvgR5VisnTxLGDcaXawBphwy9o1tZS9Unuddvdkt652MOzBopxnozzSs0 dJqC/hbR5gM86gc8fq34Hs/9AytQOkM5cYlVtxZIdJLRTXHuP7T3H9uZFo9Nujk= =8soM -----END PGP SIGNATURE----- |
_______________________________________________ squid-users mailing list squid-users@xxxxxxxxxxxxxxxxxxxxx http://lists.squid-cache.org/listinfo/squid-users
