1) speed syntax
example :
delay_parameters 1 -1/-1 1280000/1280000 128000/128000
The speed is bytes / sec.
Is it possible to use multipliers like K and M ?
Is it possible to use units, like bps ( bit per sec ) ?
It is wonderfoul to read :
delay_parameters 1 -1/-1 10Mbps/10Mbps 1Mbps/1Mbps
2) network
We have about 50 subnets, on different locations.
It is a "hub" topology : all the subnets are linked via WANs to our
central location, where there is the IT centre.
>From the IT centre we have the links to Internet, and the proxy server
running squid ( forwarding, IT manager decision ).
Our internal IP addressing is 10.0.0.0/8
10.1.0.0 for the first site, 10.2.0.0 the 2nd, etc ...
Goals :
overall proxy bandwidth limit : none
each site limit : 10 Mbps
each pc client limit : 1 Mbps
My work-around is this, using class 3 for /16 networks :
delay_class 1 3
delay_parameters 1 -1/-1 1280000/1280000 128000/128000
but it is a "fuzzy" fitting : each remote site is seen by squid as N
smaller networks, so the overall site limit is N * 10 Mbps ...
Is it possible to match my goals ?
Or I request a new class, where we can specify the netmask.
best regards, Sala
massimo.sala@xxxxxxxxxxxxxx
Tel. 035/385.034
ASL Provincia di Bergamo | Sistemi Informativi Strategici
_______________________________________________
squid-users mailing list
squid-users@xxxxxxxxxxxxxxxxxxxxx
http://lists.squid-cache.org/listinfo/squid-users
