On 8/12/2015 4:00 p.m., Marcio Demetrio Bacci wrote: > I have changed my authentication block as below, but is not working. > > The proxy user is a Read Only Domain Controller member. The password is > correct. > > Samba4, krb5-user and winbindd are installed and work perfectly. Do I need > install any other package? What authentication system do you think you are using? Basic or Kerberos? because you configured Basic. > > How can I test in command line? > Everthign in squid.conf after the "auth_param basic program " is the command line for the helper. * Run that command line: /usr/lib/squid3/basic_ldap_auth \ -b cn=users,dc=empresa,dc=com,dc=br \ -D cn=proxy,cn=users,dc=empresa,dc=com,dc=br -w test_12345 \ -h 192.168.0.25 -p 389 -s sub -v 3 -f "sAMAccountName=%s" * If nothing happens and it just waits for input, it has started properly. * Enter two words on each line, username and password for a user account which might be using Squid. Try both valid and invalid combos. * The helper will reply OK (valid) or ERR (invalid) if it has been a successful check. BH if there was a failure. > Have anything wrong in my authentication block ? > > auth_param basic program /usr/lib/squid3/basic_ldap_auth -b > cn=users,dc=empresa,dc=com,dc=br -D > cn=proxy,cn=users,dc=empresa,dc=com,dc=br -w test_12345 -h 192.168.0.25 -p > 389 -s sub -v 3 -f "sAMAccountName=%s" > auth_param basic children 50 > auth_param basic realm Proxy Server Squid > auth_param basic credentialsttl 2 hours > auth_param basic casesensitive off Nothing particularly visible to me. But that said I'm not a regular user of LDAP, so there could be something subtle hiding in the LDAP query strings or ither parameters that deos not match what your LDAP service needs. > > With the command "ldbsearch -H /opt/samba/private/sam.ldb > '(objectclass=user)' uidNumber gidNumber ", my result is: > # record 881 > dn: CN=proxy,CN=Users,DC=empresa,DC=com,DC=br > uidNumber: 10558 > gidNumber: 30037 > The U on Users is upper case in this test. It is lower case in your config file. The DC/dc CN/cn values are also different case. That might matter to your LDAP system. If either of those turn out to be the problem, then you will need to fix the -b parameter as well. Amos _______________________________________________ squid-users mailing list squid-users@xxxxxxxxxxxxxxxxxxxxx http://lists.squid-cache.org/listinfo/squid-users
