Search squid archive

Re: Question about c-icap and setting X-Next-Services header to empty string

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks Alex. You're right. Using 

ci_icap_add_xheader(req, "X-Next-Services: ");

instead solved the problem.

Regards,
Giray

----------------------------------------
> Subject: Re:  Question about c-icap and setting X-Next-Services header to empty string
> To: squid-users@xxxxxxxxxxxxxxxxxxxxx
> From: rousskov@xxxxxxxxxxxxxxxxxxxxxxx
> CC: giray_simsek@xxxxxxxxxxx
> Date: Tue, 1 Dec 2015 09:18:07 -0700
>
> On 12/01/2015 08:58 AM, Giray Simsek wrote:
>
>> I am trying to update the adaptation plan dynamically in the first
>> service (service_a_resp) Basically, if a certain condition is met,
>> then I don't want the second service (service_b_resp) to be called by
>> Squid.
>
>
>> icap_enable on
>> icap_send_client_ip on
>> icap_send_client_username on
>> icap_client_username_header X-Client-Username
>>
>> icap_service service_a_resp respmod_precache bypass=on routing=on icap://127.0.0.1:1344/virus_scan
>> icap_service service_b_resp respmod_precache bypass=on routing=on icap://127.0.0.1:1344/content_filter
>
> This is probably not important, but only the first service needs
> routing=on. Your other ICAP service does not route requests.
>
>
>> adaptation_service_chain response_chain service_a_resp service_b_resp
>> adaptation_access response_chain allow all
>
> OK.
>
>
>> After reading the documentation about the icap_service option and its
>> routing parameter, I got the impression that I can achieve this by
>> setting X-Next-Services header to empty string in my first service
>> (service_a_resp) in the adaptation chain
>
> That sounds correct although you are omitting a critical detail:
> X-Next-Services is an ICAP response header, not an HTTP header.
> Naturally, ICAP routing does not modify the HTTP message being routed.
>
>
>> as below:
>> ci_headers_add(req->response_header, "X-Next-Services: ");
>
> Googling suggests that the above c-icap method is for adding HTTP
> headers. You need to add an ICAP response header instead. I do not know
> c-icap API, so I cannot recommend a specific method. If you do not know
> how to do that either, consider asking on c-icap support forums.
>
>
> HTH,
>
> Alex.
>
 		 	   		  
_______________________________________________
squid-users mailing list
squid-users@xxxxxxxxxxxxxxxxxxxxx
http://lists.squid-cache.org/listinfo/squid-users




[Index of Archives]     [Linux Audio Users]     [Samba]     [Big List of Linux Books]     [Linux USB]     [Yosemite News]

  Powered by Linux