> 16.11.15 20:49, Tecnología CHARNE.NET пишет: > > Hello! > > > > I'm configuring delay pools on squid 3.5 > > > > I don't understand online doc > > [http://www.squid-cache.org/Versions/v3/3.5/cfgman/delay_parameters.html] > > about delay_parameters > > > > ---- > > "Note that 8 x 32000 KByte/sec -> 256Kbit/sec. > > 8 x 8000 KByte/sec -> 64Kbit/sec. > > 8 x 600 Byte/sec -> 4800bit/sec. > > " > > ---- > > > > It should be > > > > 8 x 32000 KByte/sec -> 256000Kbits/sec > > or > > 8 x 32KByte/sec -> 256 Kbit/sec > > > > What I am missing?? On Monday 16 November 2015 at 15:51:14, Yuri Voinov wrote: > You have forgotten to read fine manuals first. On Monday 16 November 2015 at 15:53:00, Yuri Voinov wrote: > Feel free to read Squid Wiki: > > http://wiki.squid-cache.org/Features/DelayPools I think this is a little unfair on the original poster. The arithmetic in the documentation does appear to be incorrect - look at the units: If 8 x 600 bytes per second = 4800 bits per second (which seems reasonable to me) then how can 8 x 8000 kilobytes per second = 64 kilobits per second and 8 x 32000 kilobytes per second = 256 kilobits per second? The multiplication by 8 is to convert from bytes to bits. The units (X per second, or kilo-X per second) should not change. Therefore I believe the correct calculations should be: 8 x 32000 bytes per second = 256000 bits per second = 256kilobits per second 8 x 8000 bytes per second = 64000 bits per second = 64 kilobits per second 8 x 600 bytes per second = 4800 bits per second Note the omission of "kilobytes per second" from the first column of numbers. Regards, Antony. -- I don't know, maybe if we all waited then cosmic rays would write all our software for us. Of course it might take a while. - Ron Minnich, Los Alamos National Laboratory Please reply to the list; please *don't* CC me. _______________________________________________ squid-users mailing list squid-users@xxxxxxxxxxxxxxxxxxxxx http://lists.squid-cache.org/listinfo/squid-users
