Amos , when I run process # 1 by Squid -n squi1 I see process # 1 mapped to core 3 When I run instance # 2 by Squid -n squid2 I see 2015/09/29 19:03:14 kid1| WARNING: 'cpu_affinity_map' has non-existing process number(s) That mean all processes are run as process # 1 !!! This is my issue I have Why all processes run as process # 1 ?? -----Original Message----- From: squid-users [mailto:squid-users-bounces@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of Ahmad Alzaeem Sent: Tuesday, September 29, 2015 9:33 PM To: 'Amos Jeffries' Cc: squid-users@xxxxxxxxxxxxxxxxxxxxx Subject: Re: squid with SMP registeration time out when i use 10K opened sessions Hi amos I did , but can u tell me why that happened ?? Look @ my cpu cores for squid when it has high traffic : 1 [####*********************************************100.0%] Tasks: 29, 4 thr; 6 running 2 [ 0.0%] Load average: 2.53 0.86 0.36 3 [ 0.0%] Uptime: 2 days, 07:21:15 4 [* 0.7%] Mem[||||||||#* 569/3950MB] Swp[ 0/255MB] PID USER PRI NI VIRT RES SHR S CPU% MEM% TIME+ Command 12350 squid 20 0 261M 77512 12488 R 20.0 1.9 4:04.68 (squid-1) -n squid1 12367 squid 20 0 265M 80736 12548 R 20.0 2.0 4:31.87 (squid-1) -n squid3 12360 squid 20 0 259M 74840 12468 R 20.0 1.9 4:04.30 (squid-1) -n squid2 12384 squid 20 0 276M 92584 12532 R 20.0 2.3 5:35.10 (squid-1) -n squid4 12478 squid 20 0 259M 74724 12468 R 20.0 1.8 3:56.48 (squid-1) -n squid5 16650 root 20 0 110M 3324 2524 R 0.0 0.1 0:02.83 htop As you see , the 5 instances has about same loading , but it seems the cpu mapping is not working ok !!! I did add the command process_numbers=1,2,3 ,4,5cores=1,2,3,4,5 to each instance of squid !! what coud me doing wrongh ? or how to test if there process got the cpu mapping as ok or not thanks a lot -----Original Message----- From: Amos Jeffries [mailto:squid3@xxxxxxxxxxxxx] Sent: Monday, September 28, 2015 11:59 PM To: Ahmad Alzaeem Cc: squid-users@xxxxxxxxxxxxxxxxxxxxx Subject: Re: squid with SMP registeration time out when i use 10K opened sessions On 28/09/2015 7:24 p.m., Ahmad Alzaeem wrote: > Hi amos > > I have 10 K > > I DIVIDED them to 5 files > > Each file has 2 K > And each file has its own cache.log file /visible name ....etc > > The question im asking is : > > Do I need to put the directive in cpu_affinity_map > process_numbers=1,2,3 ,4,5cores=1,2,3,4,5 In squid.conf ?? > > Or I need to go to each separated file of each instance and provide > command there Each separated instance file needs a different mapping to use your 15+ CPU cores. Think about it: you are dividing cores up between Squid instances. Amos _______________________________________________ squid-users mailing list squid-users@xxxxxxxxxxxxxxxxxxxxx http://lists.squid-cache.org/listinfo/squid-users _______________________________________________ squid-users mailing list squid-users@xxxxxxxxxxxxxxxxxxxxx http://lists.squid-cache.org/listinfo/squid-users
