Thanks
I have some achievement , but still no access.log
I have seen hits from router to wccp0 gre port , but cant see log file and no browsing ??
I have from tcpdump traffic goin to wccp0 :
tcpdump -i wccp0
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on wccp0, link-type LINUX_SLL (Linux cooked), capture size 65535 bytes
05:45:57.042756 IP xxxx > xxxx.http: Flags [S], seq 3127016785, win 8192, options [mss 1460,nop,wscale 8,nop,nop,sackOK], length 0
05:45:57.293315 IP xxxx > xxx.http: Flags [S], seq 3529638186, win 8192, options [mss 1460,nop,wscale 8,nop,nop,sackOK], length 0
05:46:00.036110 IP xxxx > xxxxhttp: Flags [S], seq 3127016785, win 8192, options [mss 1460,nop,wscale 8,nop,nop,sackOK], length 0
[root@localhost ~]# ifconfig
enp4s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet xxxx netmask 255.255.255.252 broadcast xxxx
inet6 fe80::1e6f:65ff:fe25:9230 prefixlen 64 scopeid 0x20<link>
ether 1c:6f:65:25:92:30 txqueuelen 1000 (Ethernet)
RX packets 1748 bytes 204497 (199.7 KiB)
RX errors 0 dropped 62 overruns 0 frame 0
TX packets 1365 bytes 242105 (236.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 10 bytes 968 (968.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 10 bytes 968 (968.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wccp0: flags=209<UP,POINTOPOINT,RUNNING,NOARP> mtu 1476
inet 127.0.1.1 netmask 0.0.0.0 destination 127.0.1.1
inet6 fe80::200:5efe:4ddd:7da6 prefixlen 64 scopeid 0x20<link>
unspec 4D-DD-7D-A6-00-00-F0-00-00-00-00-00-00-00-00-00 txqueuelen 0 (UNSPEC)
RX packets 212 bytes 10732 (10.4 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 3 bytes 180 (180.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
need something to be done in routing ?
regards
-----Original Message-----
From: squid-users [mailto:squid-users-bounces@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of Amos Jeffries
Sent: Sunday, November 9, 2014 9:17 AM
To: squid-users@xxxxxxxxxxxxxxxxxxxxx
Subject: Re: wccp2HandleUdp: fatal error - A WCCP router does not support the forwarding method specified, only GRE supported
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 10/11/2014 12:19 p.m., Ahmed Allzaeem wrote:
> Thanks Amos , Im trying to implement gre , AND I followed
> http://wiki.squid-cache.org/ConfigExamples/UbuntuTproxy4Wccp2
>
> But still wondering ,
>
> Don’t we need to create GRE config for cisco ??
I've not seen any of the config examples needing to specify it specifically at the Cisco end. I suspect it is implicit in the enabling of "wccp" modules.
GRE vs L2 use also depends on the device hardware type (router or switch, PIX or ASA) and how recent the IOS version is.
Amos
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (MingW32)
iQEcBAEBAgAGBQJUX6GoAAoJELJo5wb/XPRjLbcIAK6UZYYVVUw3XZLANqJ/x4Ph
XppIXXr2nMKYyAhtSqN8+uPdHu9+pdvAVeyvnx+irp44wTDtj6+ePB7R0PMmhBTC
JTw2/egFeYZmdEI0mCsq4Tmsx4NVbQmHRYok5SYCGdkJvZGbneNgEABHMt6LQxaZ
P0B7kbLLDqMs64BNxtDBBznQCRUCZjRsnBBd8sBnMK0YX0nh6d/oAfIg1GGszW7f
bH4Mth6rpDcFzRiWnbBmAYLzPF5buhvZYw7ivzIrhQHqX0ZmBTTkCMeaEuMCr/rh
budLJRl3MwsYll/w6zoywPebGQImgzhj99ZtyKeqQQNKDPGyEOIGcmAt8HsvVNo=
=5zVY
-----END PGP SIGNATURE-----
_______________________________________________
squid-users mailing list
squid-users@xxxxxxxxxxxxxxxxxxxxx
http://lists.squid-cache.org/listinfo/squid-users
_______________________________________________
squid-users mailing list
squid-users@xxxxxxxxxxxxxxxxxxxxx
http://lists.squid-cache.org/listinfo/squid-users
